Digital Power Probe D1C and D1Y
Description
Eight different Probe Heads are available for use with the DM5 Digital Meter. The Probe Heads have four different power ranges (designated D1, D2, D3, D4). The Probe Heads are also available with two absorbing coatings designated Y and C. The Y series Probe Heads have a broad spectral absorption coating that is particularly useful for YAG lasers but covers a spectral range from 0.4 to 6 microns. This coating can also be used with CO2 lasers.
If the Probe Head is to be used with only a CO2 laser, then the C coating is preferred. The C coating does not exhibit damage until the aluminum substrate is close to melting. The D3C and D4C Probe Heads are conical in shape allowing for a higher damage threshold.
Digital Power Probe D1C and D1Y
Specifications |
|
|---|---|
| Max Average Power: | 220 W |
| Effective Aperture: | -- mm |
| Spectral Range: | 0.8-11um |
| Cooling Method: | No cooling |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
-
Sold by:
-
On FindLight:
External Vendor
Claim Macken Instruments Inc Page to edit and add data
Frequently Asked Questions
There are eight different Probe Heads available for use with the DM5 Digital Meter.
The four different power ranges designated for the Probe Heads are D1, D2, D3, and D4.
The D3C and D4C Probe Heads are conical in shape allowing for a higher damage threshold.
The Y series Probe Heads have a broad spectral absorption coating that is particularly useful for YAG lasers but covers a spectral range from 0.4 to 6 microns. The C coating is preferred if the Probe Head is to be used with only a CO2 laser and does not exhibit damage until the aluminum substrate is close to melting.
The Digital Power Probe D1C and D1Y are used with the DM5 Digital Meter to measure power ranges of lasers.