Description
The PH100-SIUV-D0 is a high-precision photodiode detector from Gentec-EO designed for laser power measurement up to 4 mW. This device features a large 10 mm Ø aperture and is available in multiple versions:
Silicon (350 - 1080 nm, up to 750 mW), Silicon-UV (210 - 1080 nm, up to 38 mW), and Germanium (800 - 1650 nm, up to 500 mW). The detector provides a range of attenuators for flexible power control, including OD0.3 (50% transmission), OD1 (10% transmission), and OD2 (1% transmission).
Designed for high accuracy, the PH100-SIUV-D0 provides wavelength selection in 1 nm steps and the lowest calibration uncertainty in its class, making it suitable for demanding applications. It also offers a fast rise time of just 0.2 seconds and a high peak sensitivity of 0.45 A/W at 850 nm.
With a smart interface to store calibration data and compatibility with Gentec-EO monitors, this detector is an ideal choice for precise laser power measurements in a variety of industrial and research applications.
Gentec-EO PH100-SIUV-D0 Photodiode Detector
Specifications
Max Average Power: | 0.038 W |
---|---|
Effective Aperture: | 10 mm |
Spectral Range: | 0.21 – 1.08 um |
Cooling Method: | No cooling |
Maximum Average Power: | 4 mW |
Noise Equivalent Power: | 10 pW |
Typical Rise Time: | 0.2 s |
Power Calibration Uncertainty: | ±18 % (210 - 229 nm); ±8.0 % (230 - 254 nm); ±6.5 % (255 - 399 nm); ±2.5 % (400 - 899 nm); ±4.0 % (900 - 1009 nm); ±7.5 % (1010 - 1080 nm) |
Peak Sensitivity: | 0.45 A/W @ 850 nm |
Minimum Repetition Rate: | 155 kHz |
Maximum Average Power Density: | 100 W/cm² |
Absorber: | SiUV |
Dimensions 3: | 8.1Ø x 27.4D mm |
Weight: | 0.13 kg |
Distance To Sensor Face: | 13.7 mm |
Features
- Wide Power Range: Measures laser power up to 4 mW
- Exceptional Sensitivity: Features a noise equivalent power of just 10 pW
- Broad Spectral Range: Operates within a spectral range of 210 - 1080 nm
- Fast Response Time: Offers a typical rise time of 0.2 seconds for rapid data acquisition
- Accurate Calibration: Calibration uncertainty ranging from ±2.5% to ±18% for different wavelength ranges
- Peak Sensitivity: Peak sensitivity of 0.45 A/W at 850 nm
- High Repetition Rate: Supports minimum repetition rates as low as 155 kHz
Applications
- Laser Power Measurement: Ideal for precise measurement of laser power output in the spectral range of 210 - 1080 nm
- High-Sensitivity Applications: Well-suited for applications requiring ultra-low noise and high sensitivity
- Research and Development: Widely used in research and development environments for laser characterization and testing
Frequently Asked Questions
What is the Gentec-EO PH Photo Detector used for?
What are the different versions of the detector available?
What is the maximum measurable power for each version?
What is the calibration uncertainty for the PH100-Si-HA?
What are the different attenuators available for the detector?
Similar Products












Your inquiry has been received.
Create an account by adding a password
Why create an account?
- Auto-complete inquiry forms
- View and manage all your past messages
- Save products to your favorites
- Close your account anytime — no hassle