All Categories
Fiber Lasers

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Lasers
  3. Fiber Lasers

Page 10 - Fiber Lasers

High Power Erbium-Doped Fiber Amplifier - EDFA300 S/P
Thorlabs, Inc.
Add to watch list
High Power Erbium-Doped Fiber Amplifier - EDFA300 S/P
Thorlabs EDFA300x core-pumped erbium-doped fiber amplifiers (EDFAs) offer >24.5 dBm output power with a low noise figure of <6 dB. The EDFA300S is a single mode EDFA with minimal sensitivity to the input light polarization, while the EFDA300P is a polarization-maintaining EDFA that only amplifies input light polarized ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1565nm
Max Output Power: 26 dBm
Nominal Gain: 40 dB
Maximum Input Power: 13 dBm
Data Sheet
Tunable Laser Source
Photon etc.
Add to watch list
Tunable Laser Source
The tunable laser source (TLS) provides continuous output from 400 nm to 2300 nm. Custom and extended spectral ranges (up to 2500 nm) and bandwidths (sub-nm) are also available. Photon etc. tunable Laser Source (TLS) is compatible with any VIS-NIR broadband source. This high-end product provides the highest out-of-band refection ...

Specifications
Bandwidth: 2-5 nm
Center Wavelength: 1350 nm
Output Power: 15 mW
Polarization: Unpolarized
Out Of Band Rejection: < -60 dB @ ± 80 nm
...
Data Sheet
PEFL-EOLA - 1.5 µm Long Pulse Fiber Laser
Lumibird
Add to watch list
PEFL-EOLA - 1.5 µm Long Pulse Fiber Laser
PEFL-EOLA are pulsed Erbium fiber doped lasers delivering Fourier transform limited pulses. These eye-safe pulsed lasers are coming linearly polarized. These lasers have excellent RIN and phase noise characteristics. The Keopsys design allows the lasers to deliver energy pulse up to 10 µJ, pulsewidth ranges from 100 to 500 ns, ...

Specifications
Wavelength: 1550 nm
Average Output Power: Up to 4 W
Pulse Duration: 100-800ns
Beam Quality (M^2): <1.1 to <1.5
Max Pulse Repetition Rate: From 10 to 20 kHz
...
Data Sheet
PGFL - Pulsed Green Fiber Lasers
Lumibird
Add to watch list
PGFL - Pulsed Green Fiber Lasers
The PGFL series is a range of 532 nm pulsed fiber lasers, delivering high peak power and high energy per pulse in compact modules with a diffraction-limited output beam for range finding applications. Green lasers are commonly used for underwater operations in mapping and 3D scanning applications. The optical design consists of a ...

Specifications
Wavelength: 532 nm
Average Output Power: Up to 1.8 W
Pulse Duration: 0.5-4ns
Beam Quality (M^2): From <1.1 to <1.4
Max Pulse Repetition Rate: 1000 kHz
...
Data Sheet
CVFL-GIGA 5xx series - Visible Fiber Lasers for Biotechnology
Lumibird
Add to watch list
CVFL-GIGA 5xx series - Visible Fiber Lasers for Biotechnology
The Lumibird CVFL-GIGA are frequency converted Ytterbium doped fiber lasers emitting ata design fixed wavelength from 520nm up to 590nm. The design is composed by an all-fiber laser cavity emitting in the IR range and a frequencyconversion module which converts IR laser to visible laser. The frequency conversionmodule is a single ...

Specifications
Center Wavelength: From 520 up to 590 / Standard 520, 532, 546, 560, 577 nm
Output Power: Up to 3 W
Beam Quality (M^2): < 1.2
Data Sheet
CVFL-GIGA 5xx series - Visible Fiber Lasers
Keopsys by Lumibird
Add to watch list
CVFL-GIGA 5xx series - Visible Fiber Lasers
The Lumibird CVFL-GIGA are frequency converted Ytterbium doped fiber lasers emitting ata design fixed wavelength from 520nm up to 590nm. The design is composed by an all-fiber laser cavity emitting in the IR range and a frequencyconversion module which converts IR laser to visible laser. The frequency conversionmodule is a single ...

Specifications
Center Wavelength: From 520 up to 590 / Standard 520, 532, 546, 560, 577 nm
Output Power: Up to 3 W
Beam Quality (M^2): < 1.2
Data Sheet
CRFL - Raman Fiber Laser
Keopsys by Lumibird
Add to watch list
CRFL - Raman Fiber Laser
CRFL Raman fiber laser provides high output power up to 20 W at 1455 and 1480 nm. The diffraction limited beam is unpolarized. Lot applications are achievable with this fiber laser. The high-quality manufacturing process permits to proposes a reliable and robust fiber laser, even for harsh environmental conditions of use. CRFL series ...

Specifications
Center Wavelength: 1455 - 1480 nm
Output Power: From 2 to 20 W
Beam Quality (M^2): < 1.1
Linewidth: < 2 or < 3 nm
Data Sheet
PYFL-KULT - 1 µm Ultra-compact Laser Transmitter
Keopsys by Lumibird
Add to watch list
PYFL-KULT - 1 µm Ultra-compact Laser Transmitter
The PYFL-KULT series is a range of 1µm pulsed fiber laser transmitters, delivering highpeak power and high energy per pulse in ultra-compact modules with diffraction-limitedoutput beam for range finding applications. A varied choice of models offers the possibilityto operate over a wide range of operating setpoints (pulse ...

Specifications
Wavelength: 1064 nm
Average Output Power: Up to 2 W
Pulse Duration: 1-3ns
Beam Quality (M^2): 1.1 to 1.3
Max Pulse Repetition Rate: 1000 kHz
...
Data Sheet
PGFL series - Pulsed Green Fiber Lasers
Keopsys by Lumibird
Add to watch list
PGFL series - Pulsed Green Fiber Lasers
The PGFL series is a range of 532 nm pulsed fiber lasers, delivering high peak power and high energy per pulse in compact modules with a diffraction-limited output beam for range finding applications. Green lasers are commonly used for underwater operations in mapping and 3D scanning applications. The optical design consists of a ...

Specifications
Wavelength: 532 nm
Average Output Power: Up to 1.8 W
Pulse Duration: 0.5-4ns
Beam Quality (M^2): From <1.1 to <1.4
Max Pulse Repetition Rate: 1000 kHz
...
Data Sheet
CYFL-TERA - CW Ytterbium-doped Fiber Laser
Keopsys by Lumibird
Add to watch list
CYFL-TERA - CW Ytterbium-doped Fiber Laser
CYFL-TERA series are Ytterbium-doped fiber lasers providing an output power up to 20W. The Lumibird optical architecture permits to deliver a diffraction limited output beamsuitable for spectroscopy. Laser trapping, optical tweezing or spectroscopy are among the applications that can bemet with the CYFL-TERA lasers series. These ...

Specifications
Center Wavelength: 1075 nm
Output Power: From 1 to 20 W
Beam Quality (M^2): < 1.1
Linewidth (FWHM): < 2 nm
Data Sheet
CYFL-GIGA - Continuous Wave Ytterbium Fiber Laser
Keopsys by Lumibird
Add to watch list
CYFL-GIGA - Continuous Wave Ytterbium Fiber Laser
CYFL-GIGA series are Ytterbium-doped fiber lasers emitting at 1083 nm. Theselasers are specially designed for helium pumping applications. Optical imaging for medicalapplications, study of the helium spin in the nuclear field, absorption spectroscopy andnuclear physics are among the large list of applications with this fiber ...

Specifications
Center Wavelength: 1083 nm
Output Power: From 2 to 20 W
Beam Quality (M^2): < 1.1
Spectral Linewidth: 2 max GHz
Data Sheet
CYFL-MEGA - Continuous Wave Ytterbium-Doped Fiber Laser
Keopsys by Lumibird
Add to watch list
CYFL-MEGA - Continuous Wave Ytterbium-Doped Fiber Laser
CYFL-MEGA stands for Continuous Ytterbium-Doped Fiber Laser. Based on a Lumibirdpatented design, the CYFL-MEGA provides a single mode operation and delivers a linewidthof few MHz up to 20 W of output power. No maintenance is required for this high-powerfiber laser. The CYFL-MEGA is the result of a long research and development ...

Specifications
Center Wavelength: 1064 nm
Output Power: From 1 to 20 W
Beam Quality (M^2): < 1.1
Data Sheet
CYFL-KILO - Continuous Wave Ytterbium Fiber Laser
Keopsys by Lumibird
Add to watch list
CYFL-KILO - Continuous Wave Ytterbium Fiber Laser
CYFL-KILO stands for Ytterbium fiber laser. The series provides a longitudinal single modeand frequency output laser beam. These lasers series deliver up to 20W with low phasenoise and low Relative Intensity Noise. Lumibird ytterbium fiber laser is manufactured for scientific applications as interferometry,quantum optics, metrology, ...

Specifications
Center Wavelength: 1064 and 1083 nm
Output Power: From 1 to 20 W
Beam Quality (M^2): < 1.1 for P ≤ 2 W and < 1.3 for P ≥ 5 W
Data Sheet
CEFL-TERA - CW Erbium Fiber Laser
Keopsys by Lumibird
Add to watch list
CEFL-TERA - CW Erbium Fiber Laser
CEFL-TERA is CW Erbium fiber laser delivering up to 30 W in random or linear polarization. This laser is a perfect tool for wide range of applications. It offers a cost effective and no maintenance solution. It is also straightforward to use it, thanks to the instinctive front panel; in 5 minutes you are ready to work. CEFL-TERA ...

Specifications
Center Wavelength: 1532/1535/1550 nm
Output Power: From 1 to 30 W
Beam Quality (M^2): < 1.1
Linewidth (FWHM): < 1 nm
Data Sheet
CEFL-KILO - Continuous Wave Erbium Fiber Laser
Keopsys by Lumibird
Add to watch list
CEFL-KILO - Continuous Wave Erbium Fiber Laser
The CEFL-KILO series (Continuous Erbium-doped fiber amplifier) are designed forcontinuous wave operations in the 1.5μm range.The lasers are single frequency fiber lasers specially designed for applications which requirea high precision such as LIDAR, atomic spectroscopy, or atom cooling. The MOPA systemprovides low RIN and high ...

Specifications
Center Wavelength: 1555 nm
Output Power: 15 W
Beam Quality (M^2): < 1.1
Data Sheet
CTFL-TERA - CW Thulium Fiber Laser
Keopsys by Lumibird
Add to watch list
CTFL-TERA - CW Thulium Fiber Laser
The CTFL-TERA series is a range of 2µm Continuous Wave thulium fiber laser deliveringup to 30W output power with random or linear polarization. The innovative all-in fiberdesigns offer a very good optical power stability with an excellent beam quality, M2<1.1or M2<1.3 depending on the output power. Solutions are possible ...

Specifications
Center Wavelength: From 1900 to 2050 nm
Output Power: Up to 30 W
Beam Quality (M^2): <1.1 or <1.3
Output Fiber Length: 1 m
Data Sheet
PUFL series - UV Ultra-compact Laser Transmitter
Keopsys by Lumibird
Add to watch list
PUFL series - UV Ultra-compact Laser Transmitter
PUFL series UV fiber lasers are pulsed laser sources emitting at 355 nm and delivering high peak power pulse in a very compact package. The 355 nm series is a UV laser based on the combination of a powerful 1.0 µm fiber laser and a com-pact/efficient frequency converter. The output beam is near Gaussian and collimated. The ...

Specifications
Wavelength: 355 nm
Average Output Power: Up to 0.001 W
Pulse Duration: 0-1ns
Beam Quality (M^2): <1.3
Max Pulse Repetition Rate: 100000000 kHz
...
Data Sheet
PEFL-EOLA SERIES - 1.5 µm Long Pulse Fiber Laser
Keopsys by Lumibird
Add to watch list
PEFL-EOLA SERIES - 1.5 µm Long Pulse Fiber Laser
PEFL-EOLA are pulsed Erbium fiber doped lasers delivering Fourier transform limited pulses. These eye-safe pulsed lasers are coming linearly polarized. These lasers have excellent RIN and phase noise characteristics. The Keopsys design allows the lasers to deliver energy pulse up to 10 µJ, pulsewidth ranges from 100 to 500 ns, ...

Specifications
Wavelength: 1550 nm
Average Output Power: Up to 4 W
Pulse Duration: 100-800ns
Beam Quality (M^2): <1.1 to <1.5
Max Pulse Repetition Rate: From 10 to 20 kHz
...
Data Sheet
PTFL-KULT SERIES - 2 µm Ultra-compact Laser Transmitter
Keopsys by Lumibird
Add to watch list
PTFL-KULT SERIES - 2 µm Ultra-compact Laser Transmitter
PTFL-KULT 2 µm series Thulium doped fiber lasers are eye-safe pulsed laser sources delivering high peak power and high energy per pulse in a very compact package. The 2 µm KULT laser is one of the most compact laser of its category. Due to its low attenuation during atmospheric propagation, this laser allows ultra long ...

Specifications
Wavelength: 1995 nm
Average Output Power: 0.2 W
Pulse Duration: 10-40ns
Beam Quality (M^2): <1.1
Max Pulse Repetition Rate: 20 kHz
...
Data Sheet
PEFL-KULT SERIES - 1.5 µm Ultra Compact Fiber Laser
Keopsys by Lumibird
Add to watch list
PEFL-KULT SERIES - 1.5 µm Ultra Compact Fiber Laser
PEFL-KULT series are pulsed Erbium doped fiber lasers, delivering high peak power and high energy per pulse. These PEFL-KULT lasers provide high quality output beams (diffraction-limited, M2<1.1 or near Gaussian, M2<1.5). Our patented VSP technology insure robustness and high reliability for cost effective solution, without ...

Specifications
Wavelength: 1545/1550 nm
Average Output Power: Up to 2.5 W
Pulse Duration: 0.5-200ns
Beam Quality (M^2): 1.1 to 1.5
Max Pulse Repetition Rate: 2000 kHz
Data Sheet
PEFL-MIRVISION SERIES - 1.5µm Pulsed Erbium Fiber Laser
Keopsys by Lumibird
Add to watch list
PEFL-MIRVISION SERIES - 1.5µm Pulsed Erbium Fiber Laser
The PEFL-MIRVISION series is a range of 1.5µm pulsed fiber laser transmitters, deliveringhigh peak power and high energy per pulse in compact modules for long-range applications. A varied choice of models offers the possibility to operate over a wide range of operatingsetpoints (pulse duration, pulse repetition frequency and ...

Specifications
Wavelength: 1545 nm
Average Output Power: From 3 to 10 W
Pulse Duration: 0.5-200ns
Beam Quality (M^2): --
Max Pulse Repetition Rate: 250 kHz
...
Data Sheet
PYFL-MIRVISION - 1 µm High Power Fiber Laser
Keopsys by Lumibird
Add to watch list
PYFL-MIRVISION - 1 µm High Power Fiber Laser
The PYFL-MIRVISION series is a range of 1µm pulsed fiber laser transmitters, deliveringhigh peak power and high energy per pulse in compact modules for long-range applications. A varied choice of models offers the possibility to operate over a wide range of operatingsetpoints (pulse duration, pulse repetition frequency and ...

Specifications
Wavelength: 1064 nm
Average Output Power: Up to 10 W
Pulse Duration: 1-4ns
Beam Quality (M^2): <1.3
Max Pulse Repetition Rate: 1000 kHz
...
Data Sheet
PYFL-PICO - 1 µm picosecond pulses
Keopsys by Lumibird
Add to watch list
PYFL-PICO - 1 µm picosecond pulses
The PYFL-PICO is a picosecond pulsed Ytterbium fiber laser operating at 1064 nm, with a 100 MHz pulse repetition frequency and ~ 50 ps pulse length. The laser can be used as a seeder for high-energy amplifiers in applications such as material processing. The compact laser module can also be integrated into confocal microscopy and ...

Specifications
Wavelength: 1064 nm
Average Output Power: 1 W
Pulse Duration: 0-50ns
Beam Quality (M^2): <1.1
Max Pulse Repetition Rate: 100000 kHz
...
Data Sheet
YFL-6000MM Ytterbium Multi-mode CW Fiber Laser Source
Techwin(China) Industry Co.,Ltd
Add to watch list
YFL-6000MM Ytterbium Multi-mode CW Fiber Laser Source
Techwin YFL-6000MM Ytterbium Multi-mode CW Fiber Laser Source, adopts latest industry technology and the optimization design, with high electro-optical conversion efficiency, high lifetime, high safety and reliability. The unit with high-quality output beam and strong capability on resisting high-reflective, can be widely used in all ...

Specifications
Center Wavelength: 1080 nm
Output Power: 6000 W
Beam Quality (M^2): 11
Data Sheet
YFL-4000MM Ytterbium Multi-mode CW Fiber Laser Source
Techwin(China) Industry Co.,Ltd
Add to watch list
YFL-4000MM Ytterbium Multi-mode CW Fiber Laser Source
Techwin YFL-4000MM Ytterbium Multi-mode CW Fiber Laser Source, adopts latest industry technology and the optimization design, with high electro-optical conversion efficiency, high lifetime, high safety and reliability. The unit with high-quality output beam and strong capability on resisting high-reflective, can be widely used in all ...

Specifications
Center Wavelength: 1080 nm
Output Power: 4000 W
Beam Quality (M^2): 11
Data Sheet