Compact Spectrometers for UV-Vis-NIR and NIR Analysis

Magna High-Resolution Series Spectrometer

Magna High-Resolution Series Spectrometer

Sold by: Evolve Sensing Ships from: United States
Specifications
Wavelength Range (reflectance): 400 – 1700 nm
Resolution: 0.3 nm
Dimensions: 199 × 170 × 64.5 mm
Detector Type: Back-thinned CCD (2048 px, TE-cooled); InGaAs (512 px, TE-cooled)
Cooling: Thermoelectric (single-stage TEC, 0 °C nominal)
Delta OCT Series Spectrometer

Delta OCT Series Spectrometer

Sold by: Evolve Sensing Ships from: United States
Specifications
Wavelength Range (reflectance): 800 – 880 nm
Resolution: 0.04 nm
Dimensions: 180 × 120 × 63 mm (spectrometer only); 60 × 60 × 31.1 mm (camera)
Detector Type: 2048-pixel CMOS line-scan sensor
Cooling: Uncooled (ambient operation, 5–40 °C)
Phenom Vis-NIR High Resolution Series Spectrometer

Phenom Vis-NIR High Resolution Series Spectrometer

Sold by: Evolve Sensing Ships from: United States
Specifications
Dimensions: 180 × 175 × 60.7 mm
Detector Type: CCD (2048 px, PN1050) / CMOS (4096 px, PN1080, PN2080) / InGaAs (512 px, PN2570)
Cooling: Uncooled (ambient operation, 0–50 °C)
Signal-To-Noise Ratio (SNR): > 300:1 (single scan @ 10 ms); up to 1500:1 (averaged)
Thermal Stability: < 0.01 nm / °C
EQ Photonics GmbH - IR Spectrometer - SW-Series

EQ Photonics GmbH - IR Spectrometer - SW-Series

Sold by: EQ Photonics Ships from: Germany
Specifications
Wavelength Range (reflectance): 900 – 2500 nm
Resolution: 2.5 nm
Spectral Range (SW 5 Series): 900–1700 nm
Spectral Range (SW 8 Series): 900–1700 nm
Spectral Range (SW 9 Series): 910–2200 nm or 900–2500 nm
DragonFly DLP NIR Series Spectrometer

DragonFly DLP NIR Series Spectrometer

Sold by: Evolve Sensing Ships from: United States
Specifications
Wavelength Range (reflectance): 900 – 2280 nm
Resolution: 12 nm
Dimensions: 71.5 × 57 × 25 mm (DF1514) / 76.7 × 60 × 40 mm (DF19xx)
Detector Type: InGaAs detector (Hamamatsu G12180 series)
Cooling: Passive or 2‑stage TEC (model dependent)
Brolight UV-VIS Spectrometer

Brolight UV-VIS Spectrometer

Sold by: Hangzhou Brolight Technology Ships from: China
Specifications
Wavelength Range (reflectance): 315 – 1100 nm
Resolution: 0.35 nm
Fiber Connector: SMA905
Detector: TCD1304, 3648 liner CCD
Pixel: 3648 pixel, each pixel 8μm×200μm

Did You Know?

Did you know that in a compact spectrometer, resolution and sensitivity trade off through the entrance slit? Halving the slit width from 50 µm to 25 µm roughly doubles the optical resolution but lets in about half the light. That's why the same model is often offered with several slits, and why low-light work like fluorescence or Raman favors wider slits or a TE-cooled detector.

Frequently Asked Questions

A compact (or miniature) spectrometer combines an entrance slit, a diffraction grating and a linear detector array in a small housing, usually fiber-coupled. It records a full spectrum in milliseconds. These units are used on their own with a PC or built into OEM instruments.

Overview of Compact Spectrometers

Compact Spectrometers are miniature spectroscopic modules that integrate dispersion optics, detectors, and electronics in a small footprint. These devices provide wavelength-resolved light detection for UV, VIS, NIR, and in some cases SWIR ranges, while remaining suitable for handheld or embedded instruments. On FindLight you can source Compact Spectrometers for laboratory measurements, field deployment, and OEM integration.

Key Specifications of Compact Spectrometers

When evaluating Compact Spectrometers, consider the wavelength range, optical resolution, sensitivity, and mechanical form factor. Typical wavelength coverage spans from about 190–1100 nm for UV-VIS-NIR models, with some extended versions reaching 1700–2500 nm for SWIR.

Optical resolution is often specified in nanometers (FWHM) and depends on slit width, grating, and detector pixel size. Many Compact Spectrometers offer resolutions from ~0.2 nm to several nanometers. Detector options include CCD, CMOS, InGaAs, or Si photodiode arrays, affecting noise performance, dynamic range, and response in specific spectral bands.

Additional parameters include signal-to-noise ratio, integration time range, A/D resolution, and interface options such as USB, Ethernet, or SPI/UART for embedded control. Some Compact Spectrometers incorporate fiber-coupled inputs, interchangeable slits, or built-in triggering for synchronization with light sources and pulsed lasers.

Typical Applications

Compact Spectrometers are widely used in absorbance, reflectance, fluorescence, and emission spectroscopy. Common applications include chemical identification, color and LED binning, laser wavelength monitoring, Raman pre-detection, environmental sensing, and inline process control. Their small size makes Compact Spectrometers suitable for portable analyzers, handheld meters, and compact OEM instruments in medical, industrial, and academic environments.

Buyer Guidance on FindLight

To select appropriate Compact Spectrometers on FindLight, start by matching wavelength range and resolution to your target application, such as UV absorbance, VIS colorimetry, or NIR moisture sensing. Compare detector technologies, fiber or free-space input configurations, and interface requirements for your data acquisition system.

Review datasheets for sensitivity, dark noise, and environmental specifications if the Compact Spectrometers will be used in field or industrial settings. You can compare multiple Compact Spectrometers side by side, then request quotes directly from suppliers; no registration is required to initiate contact. This allows procurement engineers and R&D teams to quickly evaluate options and obtain pricing and lead-time information for their specific spectral analysis tasks.