UniSlide A25 Series
Description
The A25 Series UniSlide stage has a body width of 2.5 inches, slider length of 2.5 inches and can carry a 30 lbs. horizontal load. The A25 can travel up to 24.5" with the 2.5" slider/carriage.A25 Series UniSlides are comprised of an aluminum alloy extruded dovetail base with 60 degree opposing V-type ways. An aluminum alloy carriage that runs in the dovetail ways of the base. A25 lead screws are constrained and supported with pre-loaded Delrin® thrust bearings, which have pre-loaded ball bearings. The lead screw drive nut is a tension adjustable nut made of Delrin providing low friction, and minimal backlash. The A25 Series UniSlide is available in 10 models/styles. Seven lead screw pitches are available along with rapid advance configurations.
UniSlide A25 Series
Specifications |
|
---|---|
Axes Of Motion: | One |
Travel Range: | 49 mm |
Load Capacity (Horizontal): | 13.6 kg |
Load Capacity (Vertical): | 1.67 kg |
Max Speed: | -- mm/s |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Velmex Inc Page to edit and add data
Frequently Asked Questions
No, Manual UniSlides cannot be converted to motorized. They would need to be returned to the factory for conversion.
Seven lead screw pitches are available for the A25 Series UniSlide along with rapid advance configurations.
The A25 Series UniSlide stage can travel up to 24.5" with the 2.5" slider/carriage.
The A25 Series UniSlide stage can carry a 30 lbs. horizontal load.
The UniSlide Elevating Tables and UniSlide XY Tables can lift up to 100 lbs. (45.5 kg.).