IQFROG 1.0 μm The User-Friendly Optical Pulse Analyzer
Description
The IQFROG measures pulse intensity and phase in both spectral and temporal domains, yielding a complete pulse characterization. With its long delay arm and high resolution spectrometer, it measures chirped pulses up to 50 ps wide, or up to 7.5 ps wide if transform limited. Making it a perfect fit for seed laser pulses for chirped pulse amplification (CPA).
To find out more visit:
http://www.coherent-solutions.com/frog-optical-pulse-analyzer/
IQFROG 1.0 μm The User-Friendly Optical Pulse Analyzer
Specifications |
|
|---|---|
| Device Type: | FROG |
| Measurable Pulse Width: | 300-10,000fs |
| Wavelength Range: | 1000 -1610nm |
| Input Polarization: | Any |
| Recovery Technique: | Frequency Resolved Optical Gating (FROG) |
| Input Pulse Temporal FWHM: | 0.3 - 7.5 ps |
| Temporal Scan Range: | 200 ps |
| Temporal Resolution: | 15 fs |
| Input Pulse Spectral FWHM: | 0.2 - 15 nm |
| Spectral Resolution: | 150 pm |
| Pulse Repetition Rate: | Independent |
| Input RF Clock Required: | no |
| Input Peak Power (saturation): | 0.5 W2 |
| Input Peak Power (sensitivity) : | 0.002 W2 |
| Input Connector Type: | FC/APC or FC/PC |
Features
- 1000 - 1100 nm input pulse wavelength range
- Intensity & phase measurement for pulses 300 fs to 50 ps long
- Autocorrelation measurement up to 50 ps pulses
- Connectorized optical input
- Software driven automated operation
- Dedicated software for measurement and recovery
Applications
High power femtosecond and picosecond optical pulses are used for micromachining applications such as; ablating, etching and cutting of a wide range of materials as they minimize the thermal damage on the substrate.
A common technique employed to amplify the power of ultra-short pulses is Chirped Pulse Amplification (CPA). CPA broadens, amplifies and then compresses the pulse and it is necessary to know the chirp and pulse characteristics at each stages of the CPA. IQFROG measures all the pulse characteristics necessary to optimize the CPA setup.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
New Zealand
-
Sold by:
-
On FindLight:
since 2015
Frequently Asked Questions
The IQFROG has a 1000-1100 nm input pulse wavelength range.
The IQFROG can measure pulse intensity and phase in both spectral and temporal domains, as well as autocorrelation measurement up to 50 ps pulses.
The IQFROG is suitable for high power femtosecond and picosecond optical pulses used for micromachining applications such as ablating, etching, and cutting of a wide range of materials, as well as for chirped pulse amplification (CPA).
The IQFROG uses a long mechanical translation stage to provide up to 200 ps of scan range to allow autocorrelation measurement of up to 50 ps long pulses.
The IQFROG has a built-in high-resolution spectrometer to enable measurement of transform limited pulses of up to 7.5 ps width, or broader if the pulse has a frequency chirp.