Page 2 - EDFA - Erbium-Doped Fiber Amplifier Fiber Amplifiers >> Suppliers | Specifications

Conquer Optical Photonics Electro-Optic Modulator 10G/20G/40G Broadband Microwave Amplifier

Beijing Conquer Photonics Co., Ltd.

Add to watch list

An optical amplifier is a device which receives some input signal light and generates an output signal with higher optical power. Typically, inputs and outputs are laser beams (very rarely other types of light beams), either propagating as Gaussian beams in free space or in a fiber. The amplification occurs in a so-called gain ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1525-1565nm
Min Input Power:	-10 dBm
Max Output Power:	23 dBm
Nominal Gain:	- dB
...

Data Sheet

CoLIA 1550nm Long Pulse Single Frequency PM Fiber Amplifier

Connet Laser Technology Co., Ltd.

Add to watch list

The CoLIA 1550nm long pulse single frequency polarization maintaining fiber amplifiers of Connet are designed for long pulse (100ns-2us) applications. This modularized fiber amplifier is an eye-safe wavelength amplifier, and the maximum pulse energy can be up to 120uJ. It is suitable for amplifying the single frequency ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1561nm
Min Input Power:	-- dBm
Max Output Power:	600 dBm
Nominal Gain:	-- dB
...

Data Sheet

1550nm Long Pulse Single Frequency PM Fiber Laser LP

Connet Laser Technology Co., Ltd.

Add to watch list

The Connet CoLIS-LP series 1550nm nanosecond long pulse single-frequency polarization-maintaining fiber laser is a modularized pulsed fiber laser designed for short-distance coherent Doppler wind lidar applications. Operating at an eye-safe wavelength, this laser delivers single-mode linear polarization and offers high single-pulse ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1545-1565nm
Min Input Power:	-- dBm
Max Output Power:	50 dBm
Nominal Gain:	-- dB
...

Data Sheet

Single Channel Erbium-doped Fiber Pre-Amplifier for C-band

DK Photonics

Add to watch list

The erbium-doped fiber small signal amplifier (PA, Pre-Amplifier) is dedicated to the amplification of weak optical signals in the range of -45dBm ~ -25dBm. The typical gain of small signal is as high as 35 or 45 dB, and it has a low noise figure. Used before the photodetector to improve its ability to detect weak light signals.

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1565nm
Max Output Power:	35 dBm
Nominal Gain:	<0.3 dB

Data Sheet

L-Band Optical Fiber Amplifier

Connet Laser Technology Co., Ltd.

Add to watch list

Connet MARS series L-band optical fiber amplifier is integrated with high power and high property multi-mode pumps, plus with double cladding fiber amplifying technology and the optimized optical structure design to realize output power up to 5W. It has built-in laser current driver, high accuracy ATC&ACC (APC) driver ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1570-1603nm
Min Input Power:	-5 dBm
Max Output Power:	23 dBm
Nominal Gain:	-- dB
...

Data Sheet

MAES Series L-band Optical Fiber Amplifier

Connet Laser Technology Co., Ltd.

Add to watch list

Connet Laser MARS series L-Band optical fiber amplifier is integrated with high power and high property multi-mode pumps, plus with the double cladding fiber amplifying technology and the all-fiber optical structure design to realize the output power up to 32dBm. The MARS series L-Band optical fiber amplifier is an integral turn-key ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1575-1602nm
Min Input Power:	-3 dBm
Max Output Power:	5 dBm
Nominal Gain:	30 dB
...

Data Sheet

1550nm Long Pulse Single Frequency PM Fiber Amplifier

Connet Laser Technology Co., Ltd.

Add to watch list

The 1550nm long pulse single frequency polarization maintaining fiber amplifiers of Connet Laser are designed for long pulse (200ns-2us) application. These modularized fiber amplifiers are the eye-safe wavelength amplifiers and the max pulse energy is up to 120uJ@200ns. The 1550nm long pulse single frequency polarization maintaining ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1561nm
Min Input Power:	-- dBm
Max Output Power:	57 dBm
Nominal Gain:	40 dB
...

Data Sheet

Super-Fast Auto Gain Controlled Erbium Doped Fiber Amplifier (EDFA)

OZ Optics

Add to watch list

The Super-Fast Auto Gain Controlled Erbium Doped Fiber Amplifier (EDFA) is a compact and high-performance optical amplifier designed to address fast transient conditions in WDM transmission lines. It offers sub-µs suppression time and provides stable amplification with low noise and fixed 24 dB gain across a wide range of ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1529-1558nm
Min Input Power:	-19 dBm
Max Output Power:	13 dBm
Nominal Gain:	24 dB
...

Data Sheet

TC-EDFA-P Erbium Doped Fiber Amplifier

Wuhan Te-con Photoelectric Technology Co.

Add to watch list

The TC-EDFA-P erbium-doped fiber amplifier (EDFA) uses high-performance pump lasers, low noise erbium-doped fibers, and unique control and protection circuits to achieve low noise and high stability output. The front panel provides a power switch, LCD power display, output power adjustment knob, and also provides an RS232 interface. ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1525-1565nm
Min Input Power:	-45 dBm
Max Output Power:	10 dBm
Nominal Gain:	0.3 dB
...

Data Sheet

High Power Erbium-Doped Fiber Amplifier - EDFA300 S/P

Thorlabs, Inc.

Add to watch list

Thorlabs EDFA300x core-pumped erbium-doped fiber amplifiers (EDFAs) offer >24.5 dBm output power with a low noise figure of <6 dB. The EDFA300S is a single mode EDFA with minimal sensitivity to the input light polarization, while the EFDA300P is a polarization-maintaining EDFA that only amplifies input light polarized ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1565nm
Max Output Power:	26 dBm
Nominal Gain:	40 dB
Maximum Input Power:	13 dBm

Data Sheet

Core-Pumped Erbium-Doped Fiber Amplifier - EDFA 100S/P by Thorlabs

Thorlabs, Inc.

Add to watch list

Thorlabs\' core-pumped erbium-doped fiber amplifiers (EDFAs) offer >20 dBm (>100 mW) output power with a low noise figure of <5 dB. They are enclosed in a compact, turnkey benchtop package with FC/APC input and output connectors. The EDFA100S is a single mode EDFA with minimal sensitivity to the light ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1565nm
Max Output Power:	>23 dBm dBm
Nominal Gain:	>30 dB

Data Sheet

LARGE MODE AREA DOUBLE CLAD EDFA FOA-HP-30-1

FORC-Photonics

Add to watch list

Fiber amplifier FOA-EDFA-HP-30-1 offers unprecedentedly high level of nonlinearity threshold, which exceeds that of standard single-mode erbium doped fiber amplifiers by two orders of magnitude. Peak power of tens kW and pulse energy of about 1 mJ can be achieved with this amplifier. Standard version of amplifier deliver 5W of ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1550-1580nm
Max Output Power:	38 dBm
Nominal Gain:	30 dB
Central Wavelength, Nm:	1550, 1565, 1580
...

Data Sheet

MAFA 5000 Series Erbium Doped Fiber Preamplifier 14

EMCORE Corp

Add to watch list

The EMCORE MAFA 5000 Series Micro Erbium Doped Fiber Preamplifier gain block module is an ideal building block for OEM systems integration where there is a requirement to pre-amplify a 1550 nm signal for a broad range of applications including RF/microwave fiber optic links, fiber optic delay lines, sensing and control systems, and ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1562nm
Max Output Power:	14 dBm
Nominal Gain:	-- dB

Data Sheet

MAFA 5000 Series Erbium Doped Fiber Amplifier 14

EMCORE Corp

Add to watch list

The EMCORE MAFA 5000 Series Micro Erbium Doped Fiber Amplifier (μEDFA) gain block module is an ideal building block for OEM systems integration where there is a requirement to amplify a 1550 nm signal for a broad range of applications including CATV systems, RF/microwave fiber optic links, sensing and control systems, and more. The ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1562nm
Max Output Power:	14 dBm
Nominal Gain:	2.0 dB

Data Sheet

Optiva OTS-2O Series Micro Erbium Doped Fiber Amplifier 5014

EMCORE Corp

Add to watch list

The Optiva OTS-2O Series uses Emcore\'s Micro Erbium Doped Fiber Amplifier (µEDFA) Gain Block Modules which is an ideal building block for system integrators to extend the fiber link for long-haul signal transport. The OTS-2OP Series is designed to meet the most demanding noise performance requirements of fiber optic communications ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1562nm
Max Output Power:	14 dBm
Nominal Gain:	2.0 dB

Data Sheet

Two-stage EDFA With Midstage GEF

VPIphotonics

Add to watch list

Key performance characteristics of EDFAs such as high gain, low noise figure, high output power and gain flatness can be achieved in two-stage (or three-stage) amplifiers. The two-stage design provides capabilities to suppress ASE noise by the midstage optical isolator and ASE filter, which reduces amplifier saturation and positively ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1300-1480nm
Max Output Power:	20 dBm
Nominal Gain:	5 dB

Data Sheet

Amonics - Pre-Amp and Booster and In-Line Amplifier - AEDFA-IL-13

Amonics Limited

Add to watch list

Amonics’ amplifiers incorporate unique design to produce maximum signal gain and saturated output power while minimizing noise figure, which will expand your test capabilities in systems, components manufacturing and characterizing as well as research and development. The compact turnkey benchtop or 19” Rackmount ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1563nm
Max Output Power:	13 dBm
Nominal Gain:	30 dB
Pre-Amp And Booster Specs:	Check datasheet for details

Data Sheet

Amonics - EDFA for Burst Mode Networks - AEDFA-PKT-DWDM-15-B

Amonics Limited

Add to watch list

Amonics & NICT (National Institute of Information and Communications technology, Japan) co-developed EDFAs are designed for transient suppression. The results are EDFAs that possess high output power, high gain with very low noise , low gain excursion and are ideal for Optical packet Switching (OPS) applications. The turnkey ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1537.37-1561.62nm
Max Output Power:	15 dBm
Nominal Gain:	18 dB

Data Sheet

Amonics - Pre-Amp and Booster and In-Line Amplifier - AEDFA-IL-18

Amonics Limited

Add to watch list

Amonics’ amplifiers incorporate unique design to produce maximum signal gain and saturated output power while minimizing noise figure, which will expand your test capabilities in systems, components manufacturing and characterizing as well as research and development. The compact turnkey benchtop or 19” Rackmount ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1563nm
Max Output Power:	18 dBm
Nominal Gain:	35 dB
Pre-Amp And Booster Specs:	Check datasheet for details

Data Sheet

Amonics - Pre-Amp and Booster and In-Line Amplifier - AEDFA-IL-23

Amonics Limited

Add to watch list

Amonics’ amplifiers incorporate unique design to produce maximum signal gain and saturated output power while minimizing noise figure, which will expand your test capabilities in systems, components manufacturing and characterizing as well as research and development. The compact turnkey benchtop or 19” Rackmount ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1530-1563nm
Max Output Power:	23 dBm
Nominal Gain:	40 dB
Pre-Amp And Booster Specs:	Check datasheet for details

Data Sheet

Amonics - Extended C-Band DWDM EDFA - AEDFA-C-EX-DWDM

Amonics Limited

Add to watch list

Amonics’ specialty products, C-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1528-1567nm
Max Output Power:	22 dBm
Nominal Gain:	30 dB

Data Sheet

Amonics - Extended C-Band DWDM EDFA - AEDFA-C-DWDM

Amonics Limited

Add to watch list

Amonics’ specialty products, C-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1529-1563nm
Max Output Power:	22 dBm
Nominal Gain:	30 dB

Data Sheet

Amonics - Extended L-Band DWDM EDFA - AEDFA-L-EX2-DWDM

Amonics Limited

Add to watch list

Amonics\' specialty products, L-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1570-1620nm
Max Output Power:	22 dBm
Nominal Gain:	25 dB

Data Sheet

Amonics - Extended L-Band DWDM EDFA - AEDFA-L-DWDM

Amonics Limited

Add to watch list

Amonics\' specialty products, L-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1570-1603nm
Max Output Power:	22 dBm
Nominal Gain:	30 dB

Data Sheet

FOA-M2300CDEFV1C-AA009 Fixed Gain EDFA

Finisar Corporation

Add to watch list

Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications
Amplifier Type:	EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range:	1529.5-1563nm
Max Output Power:	19 dBm
Nominal Gain:	0.1 dB

Data Sheet