C-Band PreAmp EDFA
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
China
-
Sold by:
-
On FindLight:
since 2016
Description
The MARS series C-band PreAmp Er-doped fiber amplifiers of Connet are the high-gain, low-noise fiber amplifiers (Pre-EDFA). This amplifier is used to pre-amplify the small signal, improve the receiver sensitivity and extend the transmission distance of the signal. This series of amplifiers employ the optimized Er- doped fiber optical path structure internally. The ASE is suppressed to an extreme level and the high-performance small signal amplification output can be achieved. The maximum gain can be up to 50dB at the small signal input of -40dBm.
Connet MARS series C- band Pre-Amp Er-doped fiber amplifiers (Pre-EDFA) have the built-in drive circuit and the logical control circuit to perform real-time monitor on the input/output optical power, the temperature of the pump laser and the module, and the signal gain. All the state parameters and the configuration information can be flexibly adjusted and monitored via the main control software on the upper computer. Both the benchtop and the module packages are available for option to meet the requirements of different applications.
C-Band PreAmp EDFA
Specifications |
|
|---|---|
| Amplifier Type: | EDFA - Erbium-Doped Fiber Amplifier |
| Wavelength Range: | 1528 – 1560 nm |
| Min Input Power: | Not Specified |
| Max Output Power: | 10 dBm |
| Nominal Gain: | 30 dB |
| Output Fiber Type: | |
Features
- Low noise, high gain
- High stability, high reliability
- Gain flattened
- Tunable output power
Applications
- Metro network
- Optical access network
- Fiber optic communication
- Scientific research
Frequently Asked Questions
Both the benchtop and the module packages are available for option to meet the requirements of different applications.
The features of the MARS series C-band PreAmp EDFA include low noise, high gain, high stability, high reliability, gain flattened, and tunable output power.
The MARS series C-band PreAmp EDFA is used to pre-amplify small signals, improve receiver sensitivity, and extend the transmission distance of the signal.
The maximum gain of the MARS series C-band PreAmp EDFA can be up to 50dB at the small signal input of -40dBm.
The MARS series C-band PreAmp EDFA is suitable for metro networks, optical access networks, fiber optic communication, and scientific research.