EQ Photonics GmbH - MAFA 5000 Series Erbium Doped Fiber Amplifier
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
Germany
-
Sold by:
EQ Photonics -
On FindLight:
since 2025
Description
The Ortel MAFA 5000 Series Micro Erbium Doped Fiber Amplifier (μEDFA) gain
block module is an ideal building block for OEM systems integration where there is
a requirement to amplify a 1550 nm signal for a broad range of applications
including CATV systems, RF/microwave fiber optic links, sensing and control
systems, and more. The family of MAFA 5000 EDFA gain blocks is designed to
meet the most demanding noise performance requirements of fiber optic
communications & control systems and perform all the functions required of an
optical amplifier for system integration.
MAFA 5000 series EDFA gain blocks provide input and output optical isolation for
stable, low noise operation. The input and output optical signals are detected for
monitoring and control. The input optical signal is amplified with active gain control
for a constant output power level or with active output power control for constant
gain mode operation.
The MAFA 5000 series EDFA gain blocks also provide monitors and associated
alarms for all critical operating parameters. The optical output of the MAFA 5000
series EDFA gain blocks can be split into multiple ports (2, 3 or 4) by an optional
internal splitter.
The compact mechanical footprint of the MAFA 5000 allows use of this unit in
constrained space environments and high-density applications.
For a quick start there is an evaluation board with all the needed connectors.
EQ Photonics GmbH - MAFA 5000 Series Erbium Doped Fiber Amplifier
Specifications |
|
---|---|
Amplifier Type: | EDFA - Erbium-Doped Fiber Amplifier |
Wavelength Range: | 1530 – 1562 nm |
Min Input Power: | -10 dBm |
Max Output Power: | 24.5 dBm |
Output Fiber Type: | Not Specified |
Operating Input Power MAX: | 12 dBm |
Total Output Power (depending On Version): | 14 to 24.5 dBm |
Noise Figure: | smaller or equal 5.0 dB dB |
Dynamic Gain Flatness MAX (depending On Version): | +/- 2.0 to +/- 8.0 dB |
Output Power Stability MAX: | +/- 2.0 dB |
Power Consumption (Steady State) MAX (depending On Version): | 3 to 13 W |
Operating Case Temperature: | 0 to 65 (possible -20 to 70) °C |
Optical Connectors: | SC, FC, E2000 or LC possible |
Features
- Full Function Fiber Optic Amplifier Ready for Integration
- Wavelength Range: 1530 nm to 1562 nm
- Low Noise Figure (Typ < 5.0 dB)
- Pin: -10dBm to +12 dBm
- Pout: +14 dBm to +24.5 dBm
- RS-232 Monitor and Control Interface
- Low Electrical Power Consumption
- Input / Output Isolation > 35 dB / 35 dB
- Polarization Dependent Gain (PDG) <0.5 dB
- Polarization Mode Dispersion (PMD) < 0.5 ps/√km
- Output Residual Pump Power < -30dB (in reference to the output signal power)
- Input & Output Return Losses < -40 dB
- Polarization Dependent Loss < 0.3 dB
- (MAFA Evaluation Board is available for fast and easy access to the device)
Applications
- CATV Systems
- Long Distance RF/Microwave Fiber Optic Communication Links
- Sensing and Control Systems
- High-Performance Supertrunking Links
- Redundant Ring Architectures
- FTTx Networks
- Research