DFB Laser - ADFB-1550-40
Description
Amonics’ stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any ITU wavelength in the S, C, L bands and at any customer-specified wavelengths for optical sensing applications. Amonics’ DFB Laser are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety. 1MHz intensity modulation is also available. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing applications. It requires only a single +5V power supply with low power consumption.
DFB Laser - ADFB-1550-40
Specifications |
|
|---|---|
| Center Wavelength: | 1550 nm |
| Output Power: | 0.040 W |
| Beam Quality (M^2): | - |
Features
- Wide wavelength coverage
- Wavelength tuning
- High output power
- Good wavelength stability
- Compact size
- Good performance cost ratio
- Two year warranty
Applications
- Fiber optic sensing
- DWDM Transmission
- SONET/SDH System
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
China
-
Sold by:
-
On FindLight:
since 2014
Frequently Asked Questions
A DFB laser is a high output power, narrow linewidth light source with high side mode suppression ratios.
Amonics' DFB Laser is available at any ITU wavelength in the S, C, L bands and at any customer-specified wavelengths for optical sensing applications.
The features of Amonics' DFB Laser include wide wavelength coverage, wavelength tuning, high output power, good wavelength stability, compact size, good performance cost ratio, and a two year warranty.
The applications of Amonics' DFB Laser include fiber optic sensing, DWDM transmission, and SONET/SDH system.
The benchtop unit has an LCD display showing the output power, alarms, and driving current values, and the output power can be adjusted by tuning the front panel control knob. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing applications. It requires only a single +5V power supply with low power consumption.