Amonics - DFB Feedback Laser - ADFB-1550-20
Description
Amonics’ stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any ITU wavelength in the S, C, L bands and at any customer-specified wavelengths for optical sensing applications. Amonics’ DFB Laser are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety. 1MHz intensity modulation is also available. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing applications. It requires only a single +5V power supply with low power consumption.
Amonics - DFB Feedback Laser - ADFB-1550-20
Specifications |
|
|---|---|
| Center Wavelength: | 1550 nm |
| Output Power: | 0.020 W |
| Beam Quality (M^2): | - |
Features
- Wide wavelength coverage
- High output power
- Good wavelength stability
- Compact size
- Good performance cost ratio
- Two year warranty
Applications
- Fiber optic sensing
- DWDM Transmission
- SONET/SDH System
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
China
-
Sold by:
-
On FindLight:
since 2014
Frequently Asked Questions
The Amonics DFB Feedback Laser is used for fiber optic sensing, DWDM transmission, and SONET/SDH systems.
The Amonics DFB Feedback Laser has a wide wavelength coverage, high output power, good wavelength stability, compact size, and good performance cost ratio. It also comes with a two-year warranty.
The benchtop version has an LCD display that shows the output power, alarms, and driving current values. It also has a front panel control knob for adjusting the output power and an active emission button for enhancing operation safety. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing applications. It requires only a single +5V power supply with low power consumption.
The output power range of the Amonics DFB Feedback Laser is from 10mW to 40mW, depending on the model.
The Amonics DFB Feedback Laser comes with a two-year warranty.