TC4001Wave Division Fiber Optic Multiplexer
Description
The “Channel Surfer,” Model TC4001 Fiber Optic Wavelength Division Multiplexer, enables 1300nm and 1550nm wavelengths to be transmitted simultaneously on the same fiber optic cable. The direction of the optical signals can be in the same direction or opposite directions. Transparent to incoming data, the TC4001 effectively doubles existing cable capacity by multiplexing two separate channels over one single mode fiber. Dual two-channel units are also available. Each TC4001 unit separates incoming optical signals between 1300nm and 1550nm. Thus, a user needs to connect the TC4001 to a device (transceiver, modem, etc.) with a 1300nm single mode transmitter at one end and a 1550nm single mode transmitter at the other end. The TC4001 fiber optic connectors are ST, FC or SC. Because it is a passive device, it requires no power.
TC4001Wave Division Fiber Optic Multiplexer
Specifications |
|
|---|---|
| Operating Wavelength: | 1310 nm |
| Operating Bandwidth: | 1550 nm |
| Isolation (min): | 16 dB |
| Max Power Handling: | -- W |
| Polarization Maintaining: | Yes |
Features
Single Mode Fiber Only
Doubles Use of Existing Fiber Optic Cable
Transparent to Data Format
Passive Device - No External Power Needed
Standalone or Rackmount
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim TC Communications Page to edit and add data
Frequently Asked Questions
No, the TC4001 is a passive device and requires no external power.
The TC4001 is used to enable 1300nm and 1550nm wavelengths to be transmitted simultaneously on the same fiber optic cable, effectively doubling existing cable capacity.
The typical thermal stability of the TC4001 is <+0.1 dB.
The TC4001 fiber optic connectors are ST, FC or SC.
The TC4001 works with single mode fiber optic cable only.