CryLaS eMOPA 266-40
Description
The new E-MOPA laser series is based on a diode-pumped passively Q-switched Nd: YAG laser (master oscillator) which is combined by a diode-pumped optical amplifier (power amplifier). By this MOPA technique higher pulse energies and average powers can be achieved constantly and optically stable compared to non-amplified systems. Integrated frequency multiplication and sum-frequency conversion allow to roll down the wavelength to 532, 355 or 266nm by using high purity nonlinear crystals.
Various models with pulse energies up to 200µJ and average powers up to 200mW are available. The pulse frequency is externally or internally triggered from single shot up to 1kHz. High peak powers of up to 200kW are reached in the range of 1ns pulse length due to the microchip design. The lasers are compact, robust and easy to integrate into instrumentations and metrology equipment.
CryLaS eMOPA 266-40
Specifications |
|
|---|---|
| Avg. Power: | 0.04 W |
| Wavelength: | 266 nm |
| Repetition Rate: | 0-1kHz |
| Spatial Mode (M^2): | 1 |
| Pulse Duration: | 1 ns |
| Pulse-to-Pulse Stability (RMS): | 2 % |
| Cooling: | Air |
| Energy / Pulse: | 40 uJ |
Features
very short pulses
external triggering
single pulse operation
excellent beam quality
high pulse-to-pulse stability
good output energy stability
Applications
Typical areas of application for E-MOPA lasers are micromachining, marking of ophthalmic glasses and polymers, bio-photonics and life sciences.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2016
Frequently Asked Questions
The CryLaS eMOPA 266-40 laser is used for micromachining, marking of ophthalmic glasses and polymers, bio-photonics, and life sciences.
The pulse frequency of the CryLaS eMOPA 266-40 laser is externally or internally triggered from single shot up to 1kHz.
The polarization ratio of the CryLaS eMOPA 266-40 laser is greater than 100:1, vertical.
The peak power of the CryLaS eMOPA 266-40 laser is greater than 40 kW at 1000 Hz.
The size of the CryLaS eMOPA 266-40 laser head is 56 x 140 x 265 mm (H x W x L).