OV24A1B B&W CMOS 24-Megapixel PureCel Plus-S Image Sensor
Description
The OV24A sensors are OmniVision's first sensors with 0.9-micron pixels. Built on PureCel®Plus stacked-die architecture, the sensors offer quantum efficiency performance matching that of the latest 1.0-micron pixel sensors. The combination of smaller pixels, higher resolution and improved performance makes the OV24A sensors an ideal camera solution for front- and rear-facing camera applications in high-end smartphones. The OV24A sensor family consists of three individual products: OV24A1Q, OV24A1B and OV24A10. The OV24A1Q, with its unique four-cell color-filter pattern, is ideal for front-facing camera applications. This sensor has an on-chip, in-pixel binning feature that captures four times more light photons than a standard 0.9-micron pixel, enabling better image quality in low-light conditions.
OV24A1B B&W CMOS 24-Megapixel PureCel Plus-S Image Sensor
Specifications |
|
|---|---|
| Sensor Type: | CMOS |
| Resolution: | 24 MP |
| # Pixels (H): | 5664 |
| # Pixels (V): | 4248 |
| Pixel Size (H): | 0.9 um |
| Pixel Size (V): | 0.9 um |
| Full Frame Rate: | 30 fps |
Features
Automatic black level calibration (ABLC)
Programmable controls for:
- Frame rate
- Mirror and flip
- Binning
- Cropping
- Windowing
Support for dynamic DPC cancellation
Supports output formats:
- 10-bit RGB RAW
- DPCM 10-8 compression
Supports horizontal and vertical subsampling
Supports typical images sizes:
- 5664 x 4248
- 3840 x 2160
- 1920 x 1080
- 1280 x 720
Standard serial SCCB interface
Up to 4-lane MIPI TX interface with speed up to 2.5 Gbps/lane
Programmable I/O drive capability
Gyro interface with 3-/4-wire SPI support
Embedded 16k bits of one-time programmable (OTP) memory (4k bits reserved for customer use)
4-cell support (OV24A1Q without PDAF):
- 4-cell binning
- 4-cell full
- 4-cell HDR timing
Sequential multi-frame HDR (OV24A10/OV24A1B)
ZigZag HDR timing (OV24A10/OV24A1B)
Three on-chip phase lock loops (PLLs)
Programmable I/O drive capability
Built-in temperature sensor
Typical module size: 8.5 x 8.5 x ~5.5 mm
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Omni Vision Page to edit and add data
Frequently Asked Questions
The OV24A sensor family consists of three individual products: OV24A1Q, OV24A1B and OV24A10.
The OV24A sensors have automatic black level calibration (ABLC), programmable controls for frame rate, mirror and flip, binning, cropping, and windowing. They also support dynamic DPC cancellation and various output formats and image sizes.
The OV24A1B is a monochrome sensor while the OV24A10 is a Bayer sensor. When used as the primary, rear-facing camera in a dual-camera configuration, they enable higher zoom ratios and higher-quality still images and video even in low-light conditions.
The OV24A1Q has a unique four-cell color-filter pattern and an on-chip, in-pixel binning feature that captures four times more light photons than a standard 0.9-micron pixel, enabling better image quality in low-light conditions. It is ideal for front-facing camera applications.
The typical module size of OV24A sensors is 8.5 x 8.5 x ~5.5 mm.