Gentec-EO High Power Detector HP100A-4KW-HE-TUBE-IMP-D0

Specifications

Aperture Shape: Round
Aperture Size (larger Dimension): 70 mm
Spectral Range: 190 - 25000 nm
Maximum Average Power (continuous): 4000 W
Minimum Average Power: 100 W
Noise Equivalent Power: 3 W
Spectral Range: 0.19 - 20 μm
Typical Rise Time: 7 sec
Typical Power Sensitivity: 0.4 mV/W
Power Calibration Uncertainty: ±5 %
Repeatability: ±2 %
Back Reflections: <4%
Linearity With Power: ±1.5 %
Linearity Vs Beam Diameter: ±1 %
Linearity Vs Beam Position: ±1.7 %
Required Cooling Flow: (4 - 6) LPM < ±1 LPM/min
Temperature Range: 15 – 25 °C
Rate Of Temperature Change: < ±3°C/min
Maximum Water Pressure: 413 kPa (60 psi)
Maximum Average Power Density: 4 kW/cm²
Analog Output: 0-2 Volts
Aperture Diameter: 70 mm
Dimensions: 127H x 127W x 234D mm
Weight: 6 kg
Document icon Download Data Sheet Download icon

Features

The HP-D0 detectors are supplied with a 180 cm length flexible cable with output connection options of a DB-15 \"intelligent\" male connector.


NOTE: To eliminate possible damage, do not carry the detector using the connector cable. HP detectors are supplied with a stand. For cases where Gentec-EO’s monitors don’t automatically read the wavelength correction factor, you can use your detector’s “Personal wavelength correction TM Certificate” to adjust the power you read to a power corrected for a particular wavelength.



 

Applications


  • Laser power measurements

  • Spectroscopy 

  • Metrology