FPYL-589-XXT-S Orange DPSS Laser
Description
The FPYL-589-XXT-S is an orange DPSS (Diode-Pumped Solid-State) laser designed for precision applications. With a wavelength of 589nm and adjustable output power ranging from 1mW to 50mW, this laser provides a stable and reliable performance.
It operates in continuous wave (CW) mode and features a TEM00 transverse mode, ensuring high-quality beam characteristics. The laser offers low power stability, quick warm-up time, and excellent pointing stability. It is suitable for a wide range of applications that require an orange laser source.
FPYL-589-XXT-S Orange DPSS Laser
Specifications |
|
|---|---|
| Wavelength: | 589 nm |
| Max Output Power: | 50 mW |
| Cooling Method: | Active cooling |
| Tunability: | Fixed Wavelength |
| Control Interface: | Other (not specified) |
| Beam Diameter At The Aperture (1/e²): | ~0.7 mm |
| Beam Divergence (full Angle): | <1.5 mrad |
| Warm-up Time (minutes): | <5 |
| Pointing Stability After Warm-up: | <0.05 mrad |
| Beam Height From Base Plate: | 19 mm |
| Polarisation Ratio: | >100:1 |
| Modulation: | TTL/Analogue (on request) |
| Operating Temperature: | 10-35 °C |
| Expected Lifetime (hours): | 10000 |
| M² Factor: | <1.5 |
| Power Stability (RMS, Over 4 Hours): | <5 % |
| Transverse Mode: | TEM00 |
Features
- Orange DPSS laser
- Wavelength of 589nm
- Adjustable output power from 1mW to 50mW
- TEM00 transverse mode
- Continuous wave (CW) operation
- Low power stability (<2%, <3%, <5%*)
- M² factor less than 1.5
- Beam diameter at the aperture (1/e²) of approximately 0.7mm
- Beam divergence (full angle) of less than 1.5mrad
- Quick warm-up time (<5 minutes)
- Excellent pointing stability after warm-up (<0.05mrad)
- Beam height from base plate of 19mm
- Polarisation ratio greater than 100:1
- Modulation options available (TTL/Analogue, on request)
- Operating temperature range of 10°C to 35°C
- Expected lifetime of 10,000 hours
Applications
- Laser alignment and positioning
- Scientific research
- Spectroscopy
- Biomedical imaging
- Optogenetics
- Holography
- Laser display and shows
- Metrology and measurements
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
since 2015
Frequently Asked Questions
FLC offers a wide range of diode-pumped solid state laser products, including the smallest DPSS laser heads, low cost modules, low power and high power laser systems, and high quality single longitudinal mode laser systems with different power output and wavelengths.
The power output of the FPYL-589-XXT-S varies depending on the specific product, as FLC offers a range of power outputs for their diode-pumped solid state laser products.
The FPYL-589-XXT-S is used in fluorescence and biomedical imaging, Raman spectroscopy and microscopy, lithography, and other applications.
The FPYL-589-XXT-S is a diode-pumped solid state laser product offered by FLC.