Motorized Polarization Controller MPC1-M
Description
FiberControl’s Motorized Polarization Controller (MPC-1) provides stable and rapid control of the state-ofpolarization of laser sources without altering the time-averaged power. Utilizing the patented all fiber Lefèvre loop design, this time-tested approach has proven to provide excellent control with ultra-low power variations (PDL). The flexibility inherent within this design allows for a wide range of applications from component testing to PMD related activities. The continuous length of fiber enables high power and ultra-low insertion loss. This design offers a wide range of AutoScan rates and high incremental angular resolution. Supply voltages range from 85 VAC to 264 VAC (47 Hz to 63 Hz).
Motorized Polarization Controller MPC1-M
Specifications |
|
|---|---|
| Operating Wavelength Range: | 1300-1600nm |
| Insertion Loss: | 1.0 dB |
| Polarization Mode Dispersion: | -- fs |
| Resolution: | 0.15 Degrees |
Features
Single-fiber design
Ultra-low insertion loss, PDL, and back-reflection
Convenient save/recall settings
Multi-rate polarization scrambling
AutoScan operation with a wide dynamic range of rotational speed
GPIB IEEE 488.2 & RS-232 and BTM standard
Labview 6.0 driver provided. May be used with C,
C++, VB, or any other development language
featuring GPIB support
950 nm to 1070 nm or 1300 nm to 1600 nm
Applications
Component level PDL measurements
Sub-system PDL testing
General purpose in-line control of the SOP
Low to medium-speed polarization scrambler
Polarization pattern generator
Maximize or minimize signal intensity with feedback
from optical power meters (or OSA)
Component within PMD emulator
Component within PMD compensator
Polarization stabilizer
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim FiberControl Page to edit and add data
Frequently Asked Questions
The Motorized Polarization Controller (MPC-1) is used for stable and rapid control of the state-of-polarization of laser sources without altering the time-averaged power.
The features of the Motorized Polarization Controller (MPC-1) include a single-fiber design, ultra-low insertion loss, PDL, and back-reflection, convenient save/recall settings, multi-rate polarization scrambling, AutoScan operation with a wide dynamic range of rotational speed, GPIB IEEE 488.2 & RS-232 and BTM standard, and a Labview 6.0 driver provided.
The Motorized Polarization Controller (MPC-1) can be used for component level PDL measurements, sub-system PDL testing, general purpose in-line control of the SOP, low to medium-speed polarization scrambler, polarization pattern generator, maximizing or minimizing signal intensity with feedback from optical power meters (or OSA), component within PMD emulator, component within PMD compensator, and polarization stabilizer.
The voltage range for the Motorized Polarization Controller (MPC-1) is from 85 VAC to 264 VAC (47 Hz to 63 Hz).
The Motorized Polarization Controller (MPC-1) utilizes the patented all fiber Lefèvre loop design, which provides excellent control with ultra-low power variations (PDL). The continuous length of fiber enables high power and ultra-low insertion loss.