ModCon Mode Controller is an innovative solution designed by Arden Photonics to enhance the precision and reliability of multimode fiber measurements. As measurements of loss and bandwidth in multimode fibers are significantly influenced by the modal condition of the light source, the ModCon Mode Controller ensures that you achieve accurate and consistent results. This passive device is particularly beneficial in aerospace applications, where compliance with international standards is critical. By fitting the ModCon between your test set and the Fiber Under Test, you can improve measurement accuracy and maintain stable launch conditions, aligning with the 85/85% launch conditions specified in various aerospace standards. The ModCon Mode Controller stands out by providing source-independent mode control, making it an essential tool for professionals who require precise and reliable data. Unlike traditional methods that may vary significantly depending on the light source—such as OTDRs using laser sources instead of LEDs—the ModCon ensures uniformity and consistency in your measurements. Each ModCon is rigorously tested using an MPX Modal Explorer to certify that its output adheres to the required standards, irrespective of the input's modal distribution. Arden Photonics offers a Certificate of Conformance or a Test Certificate for the ModCon Mode Controller, detailing the specifics of how it was measured at wavelengths of 850 and 1300nm. This provides additional assurance of the product's capability to meet the stringent demands of aerospace applications. With its robust construction and reliable performance, the ModCon Mode Controller is an indispensable tool for achieving precise multimode fiber measurements, ensuring your operations meet the highest standards of quality and compliance.