IMPULSE High-Average-Power Femtosecond Laser
Description
IMPULSE is an all-diode-pumped, direct-diode-pumped Yb-doped fiber oscillator/amplifier system capable of producing variable pulse energies up to 10 microjoules at user-selectable repetition rates between 200 kHz and 25 MHz. With 20 Watts average power output at 2 MHz, IMPULSE offers more than an order-of-magnitude higher than has traditionally been available in a one-box ultrashort pulse laser design.
IMPULSE is based on a revolutionary new concept in mode-locked oscillator/amplifier technology. The use of a Yb-doped fiber-oscillator/fiber-amplifier design combines the low noise performance associated with solid state operation with the high spatial mode quality of fiber lasers.
IMPULSE is a compact, robust, one-box source of femtosecond to picosecond pulses with the ease-of-operation, stability and reliability you would expect from a fiber source. And all its major parameters are computer controlled, which allow it to be easily interfaced to your industrial workstation or experiment.
Optional accessories include multi-photon photo-polymerization, wave guide writing, micromachining, harmonic generation, and OPA/NOPA wavelength conversion for high S/N and rapid data acquisition in pump/probe experiments.
IMPULSE High-Average-Power Femtosecond Laser
Specifications |
|
|---|---|
| Center Wavelength: | 1030 nm |
| Repetition Rate: | 0-25000kHz |
| Pulse Energy: | 0.01 mJ |
| Energy Stability (RMS): | 1 % |
| Pulse Duration: | 250 fs |
| Pointing Stability (RMS): | 25 urad |
| Polarization: | Horizontal |
| Spatial Mode (M^2): | <1.2 |
| Amplification Scheme: | Not Specified |
Features
- Direct-diode-pumped Yb-fiber oscillator/amplifier design
- All-diode pumped, all-solid state construction
- Robust one-box design
- > 20 Watts Average Power @ 2 MHz repetition rate
- Repetition rate variable from 200 kHz to 25 MHz
- Complete computer control and web enabled
- High beam quality
- Low noise, cw-pumped
- High stability and longevity
Applications
- Micromachining
- Photopolymerization
- Direct-write waveguides
- High S/N pump/probe
- OPA/NOPA pumping
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Clark-MXR Inc. Page to edit and add data
Frequently Asked Questions
The IMPULSE laser can be used in micromachining, photopolymerization, direct-write waveguides, high S/N pump/probe, OPA/NOPA pumping, and other applications.
The laser head dimensions are 32.5”L x 27.2”W x 9”H, and the control cabinet dimensions are 22.5”W x 25.5”D x 33.5”H.
The IMPULSE laser offers more than 20 Watts average power output at 2 MHz repetition rate.
The IMPULSE laser is capable of producing variable pulse energies up to 10 microjoules.
The IMPULSE laser offers user-selectable repetition rates between 200 kHz and 25 MHz.