CryLaS FQCW266-200
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2016
Description
The DPSS CW deep UV Laser series FQCW-266 comes with a resonant frequency conversion stage, emitting a fixed wavelength of 266 nm. The laser head is contained in a sealed aluminium housing, which allows operation in a wide range of environmental conditions. Heat removal from the laser head is done by air convection, no other provisions (chiller, fan etc.) are needed. The FQCW266-series of DPSS CW deep UV lasers deliver up to 500 mW at 266nm in single frequency operation. Compared to other CW lasers at 266 nm, the FQCW266 systems have a long coherence length of more than 1000 m, narrow line width (<300 kHz), low power consumption and a small footprint. The FQCW-266 plug & play laser comes with a control unit, allowing either push button control or remote control operation via serial (RS232 & USB) interface. The lasers offer excellent beam quality with an M2 below 1.3, beam divergence below 0.8 mrad (full angle), low intensity noise below 0.5%rms (100 kHz-10 MHz) and a good power stability (<1% in 8 hours). These CW laser units are the proper tools for applications as Raman Spectroscopy, Wafer inspection and Photoluminescence where a long coherence length is required.
These UV CW lasers provide excellent beam quality and performance and are designed to meet the challenging demands of industrial use and intensive R&D.
CryLaS FQCW266-200
Specifications |
|
|---|---|
| Wavelength: | 266 nm |
| Max Output Power: | 200 mW |
Features
Single Frequency
Low Noise
TEM00
Up to 500 mW
Long coherence length of 1000 m
High beam quality M2 < 1.3
Small footprint (rugged and compact)
Conduction cooling
User friendly
Linewidth < 300 kHz
Applications
These CW laser units are the proper tools for applications as Raman Spectroscopy, Wafer inspection and Photoluminescence where a long coherence length is required.
Frequently Asked Questions
The CryLaS FQCW266-200 laser is suitable for applications such as Raman Spectroscopy, Wafer inspection, and Photoluminescence where a long coherence length is required.
The CryLaS FQCW266-200 laser offers excellent beam quality with an M2 below 1.3 and beam divergence below 0.8 mrad (full angle).
The CryLaS FQCW266-200 laser delivers up to 500 mW at 266nm in single frequency operation.
The CryLaS FQCW266-200 laser has a long coherence length of more than 1000 m.
The CryLaS FQCW266-200 laser emits a fixed wavelength of 266 nm.