Description

Visual Laser Marking Machine VIPIN-FSD-F30P / VIPIN-FSD-F05P

The VIPIN-FSD-F30P and VIPIN-FSD-F05P visual laser marking machines are high‑precision, fully automated systems engineered for continuous production of tape- and tube‑fed electronic components. Designed with SOP8 and other small-outline IC packages in mind, these systems integrate auto-feeding, pin inspection, CCD vision positioning, and film lamination into a single compact workstation. Compared with conventional manual or semi‑automatic marking setups, this solution delivers significantly higher throughput, consistent marking quality, and reliable in‑line inspection – all in a footprint suitable for modern SMT and semiconductor production lines.

At the core of the platform are two laser options tailored to different marking requirements. The FSD-F30P uses a 30 W fiber laser (1064 nm), ideal for deep, high-contrast marking on metals and many engineering plastics commonly used in IC and connector packaging. The FSD-F05P employs a 5 W UV laser (355 nm), well suited for delicate materials and ultra-fine markings where minimal thermal impact and crisp definition are essential. Both configurations are driven by a stable JCZ control card and the dedicated VIPin Vision Laser II software, ensuring precise beam control, repeatable results, and compatibility with a broad range of production recipes.

A key advantage of these systems is the integrated CCD vision platform with approximately 0.03 mm visual accuracy on flat surfaces. The camera system rapidly identifies incoming component orientation (front/back and up/down), allowing the machine to auto-correct marking position without manual adjustment. This intelligent vision alignment helps eliminate misprints and supports a wide variety of IC formats including SOP8/10/12/14/16/18/20/24/28/30. In addition to alignment, the vision module performs inline inspection of pin integrity and character completeness, enabling early detection of defects and reducing downstream rework or scrap.

For production flexibility, the adjustable track accommodates braid widths from 12 mm up to 24 mm and depths up to 30 mm, making it suitable for many standard SMD carrier tapes and tubes. The machine supports roll-to-roll and tube-to-roll incoming material configurations, which is particularly useful for integrating into automated packing lines. With a packing speed of up to 12,000 pieces per minute (application- and layout-dependent), the VIPIN-FSD series is designed to keep pace with high‑volume SMT assembly and semiconductor test/packaging environments.

The cover tape handling and sealing module has been developed with ease of use and process control in mind. Operators can finely adjust the tension and position of the cover belt to match different tape materials, ensuring stable lamination and secure sealing. Multiple packaging modes are available, including self‑adhesive cold sealing, hot‑press continuous belt sealing, and inching belt sealing, which allows the same machine to support a variety of packaging standards and process flows. This flexibility makes the system suitable for both high‑mix, low‑volume production and dedicated high‑speed lines.

Thermal management is critical when sealing tapes and protecting sensitive SMD devices. The integrated PID thermostat-based temperature control system allows precise adjustment of process temperature to suit different component and tape combinations. By tailoring sealing temperatures to the specific SMD package, the machine helps prevent heat-related damage, deformation, or seal failure, while maintaining a stable process window that ensures consistent sealing strength and appearance.

From an operator’s perspective, the VIPIN-FSD-F30P/U05P is built around an intuitive software control environment that supports Windows 7/10/11 and offers multiple language options, including Chinese and English. The human‑centered interface simplifies job setup, marking content editing, and parameter management. Users can quickly configure letters, numbers, logos, and other codes, and store different recipes for fast changeovers between product types. Manual Z‑axis adjustment from 0 to 550 mm and red-light indicating focus adjustment provide straightforward alignment for new tape formats or component heights.

Mechanically, the system combines servo motors, stepper motors, and electric relays for accurate, repeatable motion control. The stable motion platform, together with an ultra‑high‑speed scanning galvanometer, enables fast yet precise marking on each component without compromising legibility or contrast. At a machine size of approximately 1040 × 1020 × 1400 mm and around 158 kg in weight, the unit is compact enough to integrate into existing production lines, yet robust enough for continuous 24/7 industrial operation.

VIPIN FSD F30P F05P Visual Laser Marking Machine For SOP8 SMD Tape

Specifications

Work Area X: 24 mm
Work Area Y: 24 mm
Beam Delivery: Galvo
Laser Source: Fiber
Laser Output Power: 30 W
Laser Wavelength: 1064 nm (IR)
Voltage Requirement: Other / Not Specified
Materials: Stainless Steel, Aluminum, Copper, Plastic, Paper, Textile, Leather, Metallized Films, Synthetic Paper, Flexible Metal-plastic
Air Assist: Not Specified
Fume Extraction Unit: Not specified
Safety Enclosure: Not Specified
Braid Width: 12–24 mm
Operating System Support: Windows 7/10/11
Applicable Bandwidth Belt: 12–40 mm
Weight: Approx. 158 kg
Machine Size: 1040 × 1020 × 1400 mm
Language: Chinese, English
Software: VIPin Vison Laser II
Movement Control: Unit/servo motor/stepping motor/electric relay
Incoming Materials: Roll to Roll / Tube to Roll
Marking Card: JCZ Card
Marking Content: Letters, text, numbers, logos etc.
IC Supported: SOP8/10/12/14/16/18/20/24/28/30
Braid Depth: ≤30 mm
Style No.: FSD-F30P / FSD-F05P
Vision Inspection: Pin/Character Detection
Packing Speed: 12000 pcs/min
Focus Adjustable Mode: Manual (Red light indication)
Z Axis Range: 0–550 mm (Manual adjustment)
Visual Accuracy: 0.03 mm (Flat Surface)
Temperature Control System: PID Thermostat
Laser Wavelength (FSD-F05P): 355 nm
Laser Wavelength (FSD-F30P): 1064 nm
Laser Power (FSD-F05P): 5 W
Laser Power (FSD-F30P): 30 W
Laser Type (FSD-F05P): UV
Laser Type (FSD-F30P): Fiber

Got questions about specs? Use the inquiry form to ask.

Document icon Download Data Sheet Download icon

Features

  • High-Precision Fiber & UV Laser Marking – Available in 30W fiber (1064 nm) and 5W UV (355 nm) configurations, enabling sharp, permanent, high-contrast marking of IC packages, plastic tapes, and a broad range of electronic components.
  • Specialized for SOP8–SOP30 Tube-Fed & Tape-Fed ICs – Optimized for SOP8 tube-fed marking and compatible with SOP10/12/14/16/18/20/24/28/30, supporting roll-to-roll and tube-to-roll incoming materials for flexible production setups.
  • Integrated Automatic Feeding & Handling – Built-in auto-feeding system for tape/tube-fed components ensures continuous, unattended operation and stable throughput in high-volume SMT and semiconductor production lines.
  • Advanced CCD Vision Positioning System – High-precision CCD vision alignment with ±0.03 mm visual accuracy (flat surface) quickly distinguishes part orientation (front/back, up/down) to guarantee correct mark placement and reduce scrap.
  • Real-Time Pin & Character Inspection – Integrated visual detection function automatically checks pin integrity and mark completeness, helping to catch defects early and ensure consistent traceability quality.
  • Ultra-High-Speed Galvo Scanning – Equipped with an ultra-fast scanning galvanometer to rapidly complete marking tasks, supporting packing/marking speeds up to 12,000 pcs/min (application dependent).
  • Adjustable Carrier Track for Multiple Tape Widths – Continuously adjustable track accommodates tape/braid widths from 12 mm to 40 mm (applicable spec range 12–24 mm width, ≤30 mm depth), easily adapting to different package sizes.
  • Flexible Sealing & Packaging Modes – Supports a variety of continuous belt sealing options, including self-adhesive cold sealing, hot-press sealing, and inching belt sealing, ideal for different reel and tape applications.
  • User-Friendly Cover Tape Tension Control – The cover belt mechanism is easy to adjust, allowing fine-tuning of cover tape travel tension and cover tape position to prevent component shift and sealing defects.
  • Intelligent PID Temperature Control – Built-in PID thermostat accurately controls packaging and sealing temperature, allowing free adjustment for different SMD components and tape materials to avoid thermal damage.
  • Stable Z-Axis Adjustment – Manual Z-axis travel from 0–550 mm with red-light focus indication makes it simple to set and optimize focal distance for different component heights and fixture setups.
  • Powerful VIPin Vision Laser II Software – Dedicated marking software with Windows 7/10/11 support and a human-centered interface enables easy setup of jobs, vision alignment parameters, and production recipes.
  • Multi-Language Interface – Supports Chinese and English (with capability for additional languages as needed), making operation intuitive for diverse production teams.
  • Versatile Marking Content – Easily mark letters, text, serial numbers, barcodes, logos, and graphics using the stable JCZ control card widely adopted in industrial laser marking systems.
  • Reliable Motion & Control Architecture – Combines servo motors, stepper motors, and electric relays for precise movement control, stable indexing, and long-term industrial reliability.
  • Compact, Production-Ready Footprint – Machine size of 1040 × 1020 × 1400 mm and weight of approximately 158 kg allows easy integration into existing SMT and semiconductor production lines or automated cells.
  • Enhanced Traceability & Quality Control – High-contrast, permanent laser marks combined with on-line vision inspection support robust product traceability, quality audits, and compliance with electronics industry standards.
  • Low Maintenance, Non-Contact Process – Non-contact laser marking avoids mechanical wear and deformation of components, with low consumables cost and minimal downtime compared to ink-based coding systems.

Applications

Applications of Visual Laser Marking Machine VIPIN‑FSD‑F30P/U05P

  • SMD / SMT Component Tape Marking in Automated Production Lines
    Ideal for high‑volume, continuous marking of surface‑mount devices (SMD/SMT) directly on carrier tapes. Suitable for electronics manufacturing lines that require non‑stop roll‑to‑roll or tube‑to‑roll processing with integrated feeding and packing.
  • SOP8 Tube‑Fed IC Marking
    Specifically optimized for SOP8 tube‑fed marking and compatible with SOP10/12/14/16/18/20/24/28/30 ICs. Used in semiconductor back‑end lines for permanent identification, traceability codes, and parametric labeling on integrated circuits.
  • Traceability and Serialization of Electronic Components
    Marking of serial numbers, batch numbers, date codes, barcodes, and 2D codes (e.g., Data Matrix, QR) on tape‑packed ICs and discrete components. Supports end‑to‑end traceability for quality control, warranty tracking, and anti‑counterfeiting.
  • Logo, Brand and Regulatory Marking on Chips and Modules
    Permanent, high‑contrast marking of logos, branding, polarity indicators, pin‑1 markers, RoHS/CE/UL and other regulatory symbols on various packaged semiconductor devices and electronic modules.
  • Visual Inspection and Pin Integrity Verification
    Integrated CCD vision system and visual detection functions enable automatic inspection of pin integrity and character completeness. Used in quality‑critical production where defective pins or incomplete marking must be detected and rejected in real time.
  • Precision Marking of Miniaturized and High‑Density Components
    UV (355 nm) and fiber (1064 nm) laser options support fine, high‑resolution marking on small, densely packed components, minimizing thermal impact and preserving component performance.
  • Automated Carrier Tape Packaging and Sealing
    Designed for packaging components on carrier tape with adjustable track width (12–40 mm). Supports multiple sealing modes, including self‑adhesive cold sealing, hot‑press continuous belt sealing, and inching belt sealing for flexible packaging lines.
  • Integrated Film Lamination and Cover Tape Handling
    Built‑in film lamination and adjustable cover tape tension/position make it suitable for tape‑and‑reel processes where protection of components and markings during transport and storage is required.
  • High‑Speed Marking in Mass Production
    Ultra‑high‑speed scanning galvanometer and up to 12000 pcs/min packing speed make the system ideal for mass production of consumer electronics, automotive electronics, and industrial control components needing rapid throughput.
  • Flexible Marking of Text, Codes, and Graphics
    Capable of marking letters, text, numbers, barcodes, 2D codes, and simple graphics/logos. Useful for customized OEM labeling, product identification, and internal coding schemes in EMS/ODM/OEM environments.
  • Electronics Manufacturing for Automotive and Industrial Applications
    Applied in production of automotive ECUs, sensor modules, power devices, and industrial controllers where robust, legible identification on tape‑fed components is required to meet safety and traceability standards.
  • Consumer Electronics and Mobile Device Component Marking
    Used for marking ICs, power management chips, RF modules, memory devices, and other small components in smartphones, tablets, laptops, and wearables, ensuring clear identification in compact form factors.
  • Medical and High‑Reliability Electronics Marking
    Suitable for medical‑grade and high‑reliability electronics manufacturing that demands precise marking, pin inspection, and documented traceability of components used in diagnostic devices, monitoring equipment, and implantable support electronics.
  • OEM / Contract Manufacturing of ICs and Discrete Devices
    Supports semiconductor packaging houses, EMS providers, and contract manufacturers that need an integrated solution for tube‑fed and reel‑to‑reel component marking, inspection, and packaging in one system.
  • Marking on Diverse Tape‑Carrier Materials
    Fiber and UV laser options allow marking on a wide range of carrier tape and cover tape materials (plastic, coated films, and selected polymers), achieving high contrast while maintaining tape integrity.
  • Temperature‑Controlled Packaging of Sensitive SMD Components
    PID temperature control enables precise adjustment of sealing temperature according to different SMD components, supporting safe packaging of temperature‑sensitive and moisture‑sensitive devices (MSD).

Frequently Asked Questions

What types of components and packages can the VIPIN-FSD-F30P/U05P visual laser marking machine handle?
This system is designed for continuous automated production of tape- and tube‑fed semiconductor and electronic components. It is ideal for SOP8 tube‑fed marking and supports a wide range of SOP package sizes including SOP8/10/12/14/16/18/20/24/28/30. The adjustable track and braid (carrier tape) specification of 12–24 mm width and up to 30 mm depth make it suitable for many SMD ICs and similar tape‑and‑reel devices.
What is the difference between the FSD-F30P (fiber) and FSD-F05P (UV) models and how do I choose between them?
The two models differ mainly in laser type, wavelength, and typical application: - FSD-F30P: 30 W fiber laser, 1064 nm. Best for high-speed, high-contrast marking on metals and some plastics (e.g., IC lead frames, metal housings, coated surfaces). It offers very high throughput with 12000 pcs/min packing speed. - FSD-F05P: 5 W UV laser, 355 nm. Best for fine, high‑resolution, low‑thermal‑impact marking on plastics, epoxy mold compounds, PCB substrates, and sensitive SMD packages. UV provides better readability on dark or heat‑sensitive IC packages. Choose fiber if you prioritize speed and metal marking; choose UV if you need high‑contrast marking on plastic/epoxy packages with minimal heat‑affected zones.
How accurate is the visual positioning and inspection system, and what does it inspect?
The integrated CCD vision system achieves a visual positioning accuracy of about 0.03 mm on flat surfaces. It performs several tasks: (1) automatic positive/negative and up/down orientation detection of incoming components or tubes, (2) precise alignment of the laser marking to the device surface, and (3) visual inspection of pins and characters. The system checks whether pins are intact and whether the marked characters or codes are complete, helping to reduce mis‑marks and improve outgoing quality compared with non‑vision laser markers.
What feeding and packaging options does this laser marking machine support?
The machine supports both roll‑to‑roll and tube‑to‑roll incoming formats, making it suitable for integrating into SMT and semiconductor back‑end lines. For packaging after marking, it offers various sealing modes compatible with cover tape: self‑adhesive cold sealing, hot‑press sealing for continuous belt sealing, and inching (step‑by‑step) belt sealing. The cover belt path is easy to adjust, allowing operators to fine‑tune cover tape position and tension for different tape widths (12–24 mm) and package types.
How is temperature controlled during tape sealing for different SMD components?
The system incorporates a PID thermostat temperature control system. This allows precise, closed‑loop regulation of the sealing temperature to match the thermal requirements of different SMD components and tape materials. Operators can freely set and adjust the packaging temperature for hot‑press sealing to avoid overheating sensitive ICs, prevent tape deformation, and ensure a stable, reliable seal quality that meets industry standards for carrier tape packaging.
What software and control system does the VIPIN visual laser marking machine use?
The machine uses the VIPin Vision Laser II software running on Windows 7/10/11, with support for at least Chinese and English interfaces. It works with a JCZ control card, a common industrial laser marking controller, and drives the motion system consisting of servo motors, stepper motors, and electric relays. The software supports human‑friendly job setup, visual alignment, and marking of letters, text, numbers, logos and similar content, making it similar in workflow to other industrial laser marking systems widely used in electronics manufacturing.
What are the main installation and integration requirements for this visual laser marking system?
The machine has a footprint of approximately 1040 × 1020 × 1400 mm and weighs about 158 kg, so it is typically floor‑mounted in a production line. It includes a manually adjustable Z‑axis with a 0–550 mm range and red‑light focus indication to match different component heights. For integration, it should be placed in a clean, ESD‑safe production environment with suitable AC power, compressed air (for some sealing modules if required), and alignment to the upstream tape/tube feeder and downstream packaging or test stations. As with similar laser equipment, appropriate laser safety measures (enclosure, interlocks, operator training, and protective eyewear specific to 1064 nm or 355 nm) are required.

Got more questions? Use the inquiry form to ask the supplier directly.

Similar Products

Request Quote