Our hand-held diamond cleaving knives are effective and simple to use. They allow for quick and inexpensive preparation on hard or soft samples. The practical pen design with concealable diamond blade contributes to its comfortable handling and storage. The cleaving knife is an ideal accessory when making quick sample preparation in ...

Our hand-held diamond cleaving knives are effective and simple to use. They allow for quick and inexpensive preparation on hard or soft samples. The practical pen design with concealable diamond blade contributes to its comfortable handling and storage. The cleaving knife is an ideal accessory when making quick sample preparation in ...

Our hand-held diamond cleaving knives are effective and simple to use. They allow for quick and inexpensive preparation on hard or soft samples. The practical pen design with concealable diamond blade contributes to its comfortable handling and storage. The cleaving knife is an ideal accessory when making quick sample preparation in ...

LDC-400 is a fully automated fiber cleaver that produces flat and angled cleaves on fibers ranging from 80 microns to 1.25 mm in diameter. This tension-and-scribe system marries the tensioning capabilities of our linear proof testers with precision diamond blade scribing technology to produce consistent low-angle cleaves with ...

CFC-400-SMA is an automated cleaver designed to create a flat cleave an optical fiber that is mounted in an SMA-905 connector. It produces a high-quality, clean fiber end face with a polish-like finish in a fraction of a second. There is no polishing residue and therefore no post-processing necessary. This quick and efficient system ...

The AutoCleaver LDF™ is a high precision fiber cleaver, designed for cleaving of large diameter fibers (LDF). It provides outstanding cleaving performance for fibers from 230 μm up to 1000 μm in diameter. The unique and patent pending cleaving process generates typical cleave angles of less than 0.5 degrees. The built-in ...

The Angle cleaving unit™ is a specially designed rotary clamp that can be mounted on NYFORS AutoCleaver LDF™ as an add on. This upgrade allows the cleaver to be used not only for perpendicular cleaving but also for variable angle cleaving of fibers ranging from 230 up to more than 800 µm in diameter. The cleave ...

The AutoCleaver S2™ is a modified version of the NYFORS automatic fiber cleaver, designed for the cleaving of air-clad fibers. It provides outstanding cleaving performance on circular fibers from 125 μm up to 1000 μm in diameter. A unique and patent pending cleaving process generates typical cleave angles of less than 0.5 ...

The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 ...

The AutoCleaver LDA™ is an automatic system for precision cleaving of circular large diameter fibers (LDF). It is a special version of NYFORS\' well known large diameter cleaver and is designed for both perpendicular and angled cleaving of fibers ranging from 230 up to more than 800 µm in diameter. The cleave angle ...

The fully automated, high-speed fiber preparation unit AutoPrep II™ strips, cleans and cleaves a fiber in less than 15 seconds. It is designed primarily for industrial applications, where accuracy, reliability and a high production yield are required.The AutoPrep II™ is used for fast and chemical free fiber ...

The AutoStripper™ is designed for fast, chemical free window stripping of optical fibers, using heated air to accomplish the often difficult task of window stripping fibers with acrylate coating diameters up to 550 μm. The AutoStripper™ meets the need for variable and multiple window strip lengths at high strength and ...

Swift MultiPack-F is designed to assemble Fusion Splice On Connectors and works with any standard fusion splicer. The  combination stripper With 4 functions, stripping, cleaning, cleaving and sleeving, are in this single unit. In addition to the fibre preparation tools the Multi‐Pack F includes a visible laser source and ...

The CT30A is a high quality fibre cleaving tool for use with fusion splicers.  The CT30A is the easiest to use fibre cleaver. The cleaver blade is pushed into position, the fibre is clamped in the v-groove and the cleaving arm is lowered to initiate the cleaving action. The design of the CT30A has been optimised so that every ...

The UCL Swift CI-01 is a low cost precision cleaver that gives superb results suitable for fusion splicing. This multi action cleaver is ideal if you are working within a budget or you are looking for a back up cleaver.  

The CI-03 is the best cleaver for field technicians, it is compact, has an integrated sharps collector, an autorotating blade which gives up to 75,000 cleaves and does not require the user to adjust the blade. The CI-03 uses an oil damper system to ensure the blade contacts the fibre at a steady speed. This reduces stress to the ...

With the elimination of operator variability in scribing, coupled with the dramatic savings in consumable and labor costs, the LaserCleave™ system offers the compelling return on investment considering it’s benefits of cost savings, increased throughput and overall process improvement. From single mode to multimode and simplex ...

The fibersect rapidly removes the epoxy and fibers of all ferrules and connectors,including MPO/MTP® ferrules and single fiber connectors and ferrules. With a simple push of a button and a 1- 4 second cycle time the fibersect increases throughput, by reducing the number of  steps in the polishing process  and ...

The AUTOCLEAVER S2™ is an automatic system for precision cleaving of sensitive air-clad and microstructured fiber. It has a specially designed clamping system with air pressure controlled force regulation that enables it to clamp and hold also brittle specialty fibers that might otherwise be damaged during cleaving. It is ...

This ultra high precision cleaver is specially designed for production applications where close control of bare fiber length after cleaving is required. It senses the edge of the coating and automatically adjusts the cleave point to meet a specific bare fiber length with high precision. This length is specified by the customer at ...