YLPP-100-3-100-R Ytterbium Picosecond Fiber Laser
Description
IPG's NEW YLPP-100-3-100-R Ultra Short Pulse fiber laser produces sub 3 ps pulses with 100 μJ pulse energy delivered across its entire operational frequency range from 50 kHz to 2 MHz, producing up to 100 W of average power and extremely high peak powers up to 100 MW. Our fiber design is “beyond state-of-the-art,” enabling an incredibly compact laser that is inherently more power efficient, reliable and robust than conventional bulk-rod or disk based DPSS USP lasers, yet priced significantly lower than the industries legacy products. The novel design architecture together with our flexible control electronics provides conveniently short warm-up times and allows adjustment of both pulse energy and repetition rate without affecting the output beam parameters. Laser pulses with durations of just a few picoseconds create peak intensities so high that non-linear/multiphoton absorption takes place, resulting in an ultra-precise “cold” process with very small heat affect.
YLPP-100-3-100-R Ytterbium Picosecond Fiber Laser
Specifications |
|
|---|---|
| Wavelength: | 1030 nm |
| Repetition Rate: | 2 MHz |
| Output Power: | 100 W |
| Pulse Duration: | 3000 fs |
Features
Ultra-compact Head
Broad Frequency of Operation 50 kHz – 2 MHz
Pulsewidth <3 ps Typically ~2 ps
<!--3-->Pulse Energy up to 100 μJ
Warm Start in Seconds
Power 100 W Average, 100 MW Peak
Cold Start in Seconds
Integrated Delivery Fiber to Remote Head
Integrated Scanner Option Available
Applications
Precision Micromachining
Surface Microstructuring and Texturing
Multilayer Polymer Film Cutting
Battery and Thin Metal Foil Cutting
Sapphire LED Wafer Scribing
Thin Film Ablation for Solar/PV/Flat Panel Display
Cutting & Drilling Glass/Sapphire
Micromachining of Ceramics
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim IPG Photonics Page to edit and add data
Frequently Asked Questions
The YLPP-100-3-100-R laser produces sub 3 ps pulses with 100 μJ pulse energy.
The YLPP-100-3-100-R laser produces up to 100 W of average power.
The YLPP-100-3-100-R laser has a broad frequency of operation from 50 kHz to 2 MHz.
The YLPP-100-3-100-R laser can be used for precision micromachining, surface microstructuring and texturing, multilayer polymer film cutting, battery and thin metal foil cutting, sapphire LED wafer scribing, thin film ablation for solar/PV/flat panel display, cutting & drilling glass/sapphire, and micromachining of ceramics.
Yes, the novel design architecture together with the flexible control electronics of the YLPP-100-3-100-R laser provides conveniently short warm-up times and allows adjustment of both pulse energy and repetition rate without affecting the output beam parameters.