Optiva OTS-2O Series Micro Erbium Doped Fiber Amplifier 5014
Description
The Optiva OTS-2O Series uses Emcore's Micro Erbium Doped Fiber Amplifier (µEDFA) Gain Block Modules which is an ideal building block for system integrators to extend the fiber link for long-haul signal transport. The OTS-2OP Series is designed to meet the most demanding noise performance requirements of fiber optic communications and control systems and performs all the functions required of an optical pre-amplifier for system integration. The OTS-2O Series EDFA modules provide input and output optical isolation for stable, low-noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode operation. The OTS-2O Series also provides local and remote monitors and alarms for all critical operating parameters via SNMP and the EMCORE View Graphical Users Ineterface (GUI). The optical output can be split into multiple ports by optional external splitter. An optional back reflection monitoring feature enables safe output optical power managment.
Optiva OTS-2O Series Micro Erbium Doped Fiber Amplifier 5014
Specifications |
|
|---|---|
| Amplifier Type: | EDFA - Erbium-Doped Fiber Amplifier |
| Wavelength Range: | 1530-1562nm |
| Max Output Power: | 14 dBm |
| Nominal Gain: | 2.0 dB |
Applications
CATV Systems
Long Distance RF/Microwave Fiber Optic
Communication Links
Sensing and Control Systems
High-Performance Supertrunking Links
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim EMCORE Corp Page to edit and add data
Frequently Asked Questions
The Optiva OTS-2O Series is used to extend the fiber link for long-haul signal transport in fiber optic communications and control systems.
The OTS-2O Series is designed to meet the most demanding noise performance requirements of fiber optic communications and control systems.
The OTS-2O Series provides input and output optical isolation for stable, low-noise operation.
The OTS-2O Series provides local and remote monitors and alarms for all critical operating parameters via SNMP and the EMCORE View Graphical Users Interface (GUI).
Yes, the optical output of the OTS-2O Series can be split into multiple ports by using an optional external splitter.