MAFA 5000 Series Erbium Doped Fiber Preamplifier 14
Description
The EMCORE MAFA 5000 Series Micro Erbium Doped Fiber Preamplifier gain block module is an ideal building block for OEM systems integration where there is a requirement to pre-amplify a 1550 nm signal for a broad range of applications including RF/microwave fiber optic links, fiber optic delay lines, sensing and control systems, and more. The family of MAFA 5000 EDFA gain blocks is designed to meet the most demanding noise performance requirements of fiber optic links and perform all the functions required of an optical preamplifier for system integration. In order to achieve extremely low Noise Figures (NF), a preamplifier’s input losses must be minimized. The MAFA 5000 Series Micro Erbium Doped Fiber Preamplifier design removes input isolation and input monitoring normally found on traditional booster amplifier designs to this end. MAFA 5000 Series Micro Erbium Doped Fiber Preamplifier gain blocks provide output optical isolation for stable operation. The output optical signals are detected for monitoring and control. The pump laser bias current is controlled with constant current. The MAFA 5000 has built-in monitors for all critical operating parameters, and generates alarms when parameters exceed established thresholds. The optical output of the MAFA 5000 Series Micro Erbium Doped Fiber Preamplifier gain blocks can be split into multiple ports (2, 3 or 4) by an optional internal splitter. The compact mechanical footprint of the MAFA 5000 allows use of this unit in constrained space environments and high-density applications.
MAFA 5000 Series Erbium Doped Fiber Preamplifier 14
Specifications |
|
|---|---|
| Amplifier Type: | EDFA - Erbium-Doped Fiber Amplifier |
| Wavelength Range: | 1530-1562nm |
| Max Output Power: | 14 dBm |
| Nominal Gain: | -- dB |
Applications
Fiber Optic Delay Lines
Long Distance RF/Microwave Fiber Optic Communication Links
Sensing and Control Systems
CATV Systems
High-Performance Supertrunking Links
Redundant Ring Architectures
FTTx Networks
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim EMCORE Corp Page to edit and add data
Frequently Asked Questions
The wavelength range of the MAFA 5000 Series Erbium Doped Fiber Preamplifier is 1530 nm to 1562 nm.
The typical noise figure of the MAFA 5000 Series Erbium Doped Fiber Preamplifier is ≤ 3.5 dB.
The saturated output power of the MAFA 5000 Series Erbium Doped Fiber Preamplifier is 14 dBm, and the small signal gain is ≥ 37 dB.
Yes, the MAFA 5000 Series Erbium Doped Fiber Preamplifier has an RS-232 monitor and control interface.
Can the output of the MAFA 5000 Series Erbium Doped Fiber Preamplifier be split into multiple ports?
Yes, the output of the MAFA 5000 Series Erbium Doped Fiber Preamplifier can be split into multiple ports (2, 3 or 4) by an optional internal splitter.