All Categories

FILTER PRODUCTS

to
to
to
to
  1. Home
  2. Fiber Optics
  3. Fiber Optomechanics
  4. Fiber Optic Attenuators
  5. Multi Channel

Multi Channel Fiber Optic Attenuators

Benchtop Digital Multichannel Attenuator
OZ Optics
Add to watch list
Benchtop Digital Multichannel Attenuator
The MCDD-1000 is a compact, rugged, and low-cost benchtop digital multichannel attenuator offered by OZ Optics. It features high power handling, a wide attenuation range, low PDL and wavelength dependency, low insertion loss and back reflection, high resolution, and a rugged and compact design. The attenuator can be calibrated for ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 350-2050nm
Dynamic Attenuation Range (max): 40 dB
Insertion Loss (max): 4.0 dB
Return Loss (min): 35 dB
...
Data Sheet
MEMS Variable Optical Attenuators: Single and Multi-Channel
OZ Optics
Add to watch list
MEMS Variable Optical Attenuators: Single and Multi-Channel
The MEMS-based variable optical attenuators (VOAs) offered by OZ Optics are fast, low-cost, and available as single units or arrays. They feature independent continuous attenuation control for each channel, low insertion loss, high dynamic range, and stable and repeatable open-loop operation. The attenuation is controlled by an ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 780-2000nm
Dynamic Attenuation Range (max): 40 dB
Insertion Loss (max): < 0.8 dB
Return Loss (min): 45 dB
...
Data Sheet
Multichannel Electrically Controlled Variable Attenuator
OZ Optics
Add to watch list
Multichannel Electrically Controlled Variable Attenuator
The Multichannel Electrically Controlled Variable Attenuator is a compact, rugged, and low-cost attenuator designed for various fiber optic applications. It features high power handling, wide attenuation range, low insertion loss, and back reflection. The attenuator offers high resolution and can be calibrated for dual wavelengths ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 350-2050nm
Dynamic Attenuation Range (max): 40 dB
Insertion Loss (max): 2.0 dB
Return Loss (min): 35 dB
...
Data Sheet
1250nm-1650nm Variable Optical Attenuator Fiber SMF-28e-9/125
Laserse Inc.
Add to watch list
1250nm-1650nm Variable Optical Attenuator Fiber SMF-28e-9/125
Adjustable optical attenuator uses high precision adjustable attenuator, combined with embedded data processing platform, to provide a maximum of 30/60 dB of accurate attenuation. The RS232 communication interface is built in the attenuation meter, and the user can realize remote control of the attenuation meter through the RS232 ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 1250-1650nm
Dynamic Attenuation Range (max): 0-60 dB
Insertion Loss (max): 1.0 dB
Return Loss (min): 1.0 dB
Data Sheet
FOTEC A400 Variable Fiber Optic Attenuators
Metrotek
Add to watch list
FOTEC A400 Variable Fiber Optic Attenuators
he ATT100 series variable attenuators are identical to the old FOTEC A400 series variable attenuators. The ATT100 series are ideal for simulating cable loss for lab testing of link power margin or reducing power in links where receivers are being overloaded. The ATT100 variable attenuators are of the gap-loss type. The loss is ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 1310-1550nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): 70 dB
Return Loss (min): 70 dB
Data Sheet
Metrotek SM Variable Attenuator
Metrotek
Add to watch list
Metrotek SM Variable Attenuator
Fiber Systems offers a SM variable attenuator that is adjustable from 1 to 30db using a non calibrated knurled knob. The attenuator uses a micro-bending technique to produce a back reflection of < -70dB. Operating temperature is -10 to +70 degree C. The attenuator comes standard with 1 meter 900u pigtails that can be terminated ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 1310-1550nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): 70 dB
Return Loss (min): 70 dB
Data Sheet
Metrotek MM Variable Attenuator
Metrotek
Add to watch list
Metrotek MM Variable Attenuator
Fiber Systems offers a variable attenuator that is adjustable from 1 to 30db using a non calibrated thumb wheel. The attenuator uses angled ferrules and air gap technologies to produce a back reflection of < -70dB. This method also allows the device to be wavelength independent. The attenuation range will increase when used at ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 1310-1550nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): 70 dB
Return Loss (min): 70 dB
Data Sheet
ST Attenuators
Senko Advanced Components
Add to watch list
ST Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
MU Attenuators
Senko Advanced Components
Add to watch list
MU Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
FC APC Attenuators
Senko Advanced Components
Add to watch list
FC APC Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
FC Attenuators
Senko Advanced Components
Add to watch list
FC Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
LC Attenuators
Senko Advanced Components
Add to watch list
LC Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
SC APC Attenuators
Senko Advanced Components
Add to watch list
SC APC Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
SC Attenuators
Senko Advanced Components
Add to watch list
SC Attenuators
A fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a ...

Specifications
Number Of Channels: Single Channel, Multi Channel
Operating Wavelength Range: 1250-1625nm
Dynamic Attenuation Range (max): 30 dB
Insertion Loss (max): N/A dB
Return Loss (min): 50 dB
Data Sheet
HYBRID FM ADAPTER, ATTENUATOR FM – FC – ST –Y-XdB
PT Fiberoptics
Add to watch list
HYBRID FM ADAPTER, ATTENUATOR FM – FC – ST –Y-XdB
Dissipation of light propagating through a stub ofmetal ion doped fiber

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 1310-1550nm
Dynamic Attenuation Range (max): N/A dB
Insertion Loss (max): 1.0 dB
Return Loss (min): 0.3 dB
Data Sheet
On FindLight marketplace you will find 15 different Multi Channel Fiber Optic Attenuators from suppliers around the world. With just a few clicks you can compare different Multi Channel Fiber Optic Attenuators and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.