BM-10 Negative Stiffness Bench Top Vibration Isolation Platform
Description
Minus K isolators, they are completely passive and require NO AIR or ELECTRICITY. There are no computers, compressors or air lines needed or that can breakdown. The BM-10 bench top platform offers 10-100 times better performance than a full size air table in a package only 4.6 inches tall and 12 inches wide and deep. The BM-10 is perfect for new generations of small SPM's that require the highest performance in a very compact system. The isolators come in several capacity ranges to match your vibration-sensitive instruments.
If needed, the isolators can be customized to achieve user specific needs. Eg., different horizontal and vertical frequencies, damping, etc. They can also be made cleanroom and vacuum compatible
Minus K manufactures vibration isolators that employ Negative-Stiffness technology in low-frequency vibration isolation. These mechanisms compress the internal springs, flexures and columns to offer completely mechanical vibration isolation.
The BM-10 is excellent cost effective bench top isolator for payloads loads up to 100 lb. and 1/2 Hz performance vertical and 1 1/2 Hz horizontal.
BM-10 Negative Stiffness Bench Top Vibration Isolation Platform
Specifications |
|
|---|---|
| Height Of Vibration Isolation System: | 115 mm |
| Vertical Movement Range: | 2.5 mm |
| Precision Of Automatic Level Control: | Not Specified mm |
| Vertical Resonant Frequency: | 0.5 Hz |
| Horizontal Resonant Frequency: | 1.5 Hz |
| Air Supply Pressure : | 0 Bar |
Features
- Vertical natural frequency of 1/2 Hz or less can be achieved over the entire load range.
- Horizontal natural frequency is load dependent. 1 1/2 Hz or less can be achieved at or near the nominal load.
- Vertical Load Adjustment Crank - Simple manual adjustment compensates for changes in vertical load.
- Vertical Load Adjustment Indicator - Easily determine optimum setting using this simple visual indicator.
- Vertical Stiffness Adjustment Screw - Dial in Guaranteed 1/2 Hz or less Vertical natural frequency using this simple adjustment.
- They can also be made cleanroom and vacuum compatible.
Applications
- Optics
- Lasers
- Microscopy (SPM, SEM, AFM, etc.)
- Micro-Hardness Testing / Nano Indentation
- Laser/Optical Systems
- Spacecraft Ground Testing
- Biology/Neuroscience
- Microelectronics/MEMS Fabrication
- Cryostats
- Analytical Balances
- Audio Reproduction
- Vacuum Isolation
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2018
Frequently Asked Questions
The BM-10 Negative Stiffness Bench Top Vibration Isolation Platform is a completely passive isolator that employs Negative-Stiffness technology in low-frequency vibration isolation.
No, the BM-10 is completely passive and requires no air or electricity. There are no computers, compressors, or air lines needed or that can breakdown.
The payload weight range for the BM-10 varies depending on the model. The range is 0-10 lb for the 10BM-10 model, 10-30 lb for the 25BM-10 model, 30-55 lb for the 50BM-10 model, 50-80 lb for the 75BM-10 model, and 75-110 lb for the 100BM-10 model.
Yes, if needed, the isolators can be customized to achieve user-specific needs. For example, different horizontal and vertical frequencies, damping, etc. They can also be made cleanroom and vacuum compatible.
The BM-10 is suitable for a wide range of applications, including optics, lasers, microscopy (SPM, SEM, AFM, etc.), micro-hardness testing/nano indentation, laser/optical systems, spacecraft ground testing, biology/neuroscience, microelectronics/MEMS fabrication, cryostats, analytical balances, audio reproduction, and vacuum isolation.