CM-1 Compact High-Capacity Low-frequency Negative-Stiffness Vibration Isolator
Description
Low frequency vibration isolator for weight loads from 50 to 1050 lbs. and 1/2 Hz performance vertical and horizontal.
The new CM-1 is a compact high capacity, low-frequency negative-stiffness isolator. As with all Minus K isolators, they are completely passive and use no air or electricity. The isolators can be combined into multi isolator systems to support heavy payloads while taking up very little room themselves.
The CM-1 isolators can be placed on pedestals to bring them to an appropriate height to retrofit your existing air table, enabling you to keep your existing table top and achieve much better isolation.
The CM-1 isolators come in several capacity ranges to match your vibration-sensitive instruments such as SPMs (AFMS, STMs, etc), micro-hardness testers, profilers, interferometers, electron microscopes, or other imaging systems.
If needed, the CM-1 isolators can be customized to achieve user specific needs. Eg., different horizontal and vertical frequencies, damping, etc. They can also be made cleanroom and vacuum. compatible.
CM-1 Compact High-Capacity Low-frequency Negative-Stiffness Vibration Isolator
Specifications |
|
|---|---|
| Height Of Vibration Isolation System: | 216 mm |
| Vertical Movement Range: | 2.5 mm |
| Precision Of Automatic Level Control: | Not Specified mm |
| Vertical Resonant Frequency: | 0.5 Hz |
| Horizontal Resonant Frequency: | 0.5 Hz |
| Air Supply Pressure : | 0 Bar |
Features
- Vertical natural frequency of 1/2 Hz or less can be achieved over the entire load range.
- Horizontal natural frequency is load dependent. 1/2 Hz or less can be achieved at or near the nominal load.
CM-1 pedestals can be made to bring them the isolators to an appropriate height to retrofit your existing air table.
Applications
- Microscopy (SPM, SEM, AFM, etc.)
- Micro-Hardness Testing / Nano Indentation
- Laser/Optical Systems
- Spacecraft Ground Testing
- Biology/Neuroscience
- Microelectronics/MEMS Fabrication
- Cryostats
- Analytical Balances
- Audio Reproduction
- Vacuum Isolation
- Large-Displacement Systems
- Heavy Systems
- Custom Systems
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2018
Frequently Asked Questions
Yes, the CM-1 isolator can be customized to achieve user-specific needs, such as different horizontal and vertical frequencies, damping, and cleanroom and vacuum compatibility.
The CM-1 isolator is a passive isolator that uses negative-stiffness technology to isolate vibrations. It requires no air or electricity to operate and can be combined into multi-isolator systems to support heavy payloads while taking up very little room.
The CM-1 isolator is suitable for a variety of applications, including microscopy (SPM, SEM, AFM, etc.), micro-hardness testing, laser/optical systems, spacecraft ground testing, biology/neuroscience, microelectronics/MEMS fabrication, cryostats, analytical balances, audio reproduction, vacuum isolation, large-displacement systems, heavy systems, and custom systems.
The vertical natural frequency of the CM-1 isolator is 1/2 Hz or less over the entire load range. The horizontal natural frequency is load dependent, but 1/2 Hz or less can be achieved at or near the nominal load.
The CM-1 isolator can support weight loads from 50 to 1050 lbs.