WS-4 Negative Stiffness Compact Vibration Isolation Table
Description
Minus K isolators, they are completely passive and require NO AIR or ELECTRICITY. There are no computers, compressors or air lines needed or that can breakdown. The WS-4 Compact Vibration Isolation Table offers better performance than a full size air table. The table come in several capacity ranges to match your vibration-sensitive instruments.
If needed, the isolators can be customized to achieve user specific needs. Eg., different horizontal and vertical frequencies, damping, etc. They can also be made cleanroom and vacuum compatible
Minus K manufactures vibration isolators that employ Negative-Stiffness technology in low-frequency vibration isolation. These mechanisms compress the internal springs, flexures and columns to completely mechanical vibration.
The WS-4 is a cost effective product for weight loads up to 1000 lb. and 1/2 Hz performance vertical and horizontal.
WS-4 Negative Stiffness Compact Vibration Isolation Table
Specifications |
|
|---|---|
| Height Of Vibration Isolation System: | 838 mm |
| Vertical Movement Range: | 2.5 mm |
| Precision Of Automatic Level Control: | Not Specified mm |
| Vertical Resonant Frequency: | 0.5 Hz |
| Horizontal Resonant Frequency: | 0.5 Hz |
| Air Supply Pressure : | 0 Bar |
Features
- Vertical natural frequency of 1/2 Hz or less can be achieved over the entire load range.
- Horizontal natural frequency is load dependent. 1/2 Hz or less can be achieved at or near the nominal load.
- Vertical Load Adjustment Crank - Simple manual adjustment compensates for changes in vertical load.
- Vertical Load Adjustment Indicator - Easily determine optimum setting using this simple visual indicator.
- Vertical Stiffness Adjustment Screw - Dial in Guaranteed 1/2 Hz or less Vertical natural frequency using this simple adjustment.
- They can also be made cleanroom and vacuum compatible.
Applications
- Optics
- Lasers
- Microscopy (SPM, SEM, AFM, etc.)
- Micro-Hardness Testing / Nano Indentation
- Laser/Optical Systems
- Spacecraft Ground Testing
- Biology/Neuroscience
- Microelectronics/MEMS Fabrication
- Cryostats
- Analytical Balances
- Audio Reproduction
- Vacuum Isolation
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2018
Frequently Asked Questions
The WS-4 Compact Vibration Isolation Table is a completely passive 6 degree of freedom system that employs Negative-Stiffness technology in low-frequency vibration isolation.
The WS-4 Compact Vibration Isolation Table is a cost effective product for weight loads up to 1000 lb.
The WS-4 Compact Vibration Isolation Table can be used in Optics, Lasers, Microscopy (SPM, SEM, AFM, etc.), Micro-Hardness Testing / Nano Indentation, Laser/Optical Systems, Spacecraft Ground Testing, Biology/Neuroscience, Microelectronics/MEMS Fabrication, Cryostats, Analytical Balances, Audio Reproduction, and Vacuum Isolation.
Yes, the isolators of the WS-4 Compact Vibration Isolation Table can be customized to achieve user specific needs. Eg., different horizontal and vertical frequencies, damping, etc. They can also be made cleanroom and vacuum compatible.
The WS-4 Compact Vibration Isolation Table has a stand weight of approximately 54 lbs (25 kg) and stand dimensions of 24” W x 24” D x 23” H (610mm W x 610mm D x 584mm H).