5001 XYZ Spatial Filter
Description
The Spatial Filters use standard microscope objectives and 3⁄ 8" diameter pinhole disks, both available from Data Optics in a variety of sizes (refer to the section following this for information on sizes available). The objective lens is mounted in a sliding tube for coarse focus adjustment. The tube and objective lens can be readily removed for inspection or replacement without disturbing the pinhole. The pinhole disk is mounted in a holder which also can be easily removed. While holders are available for glue or magnetic mounting of the pinhole disk, the magnetic holder has the advantage of allowing the disks to be replaced readily. The pinhole holders are designed so that objective lenses of extremely short focal length may be used without obstruction of the emerging beam.This Spatial Filter has 3-axis micrometer adjustment on the pinhole mount and a coarse 1-axis adjustment on the objective lens mount.
5001 XYZ Spatial Filter
Specifications |
|
|---|---|
| Pinhole Diameter: | -- um |
| Mounting: | Mounted |
| Part Diameter: | -- mm |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2019
Frequently Asked Questions
Yes, the mounts can be assembled left-handed by specifying -L when ordering.
The 5001 XYZ Spatial Filter is a laser instrument that uses standard microscope objectives and 3⁄8" diameter pinhole disks to filter the laser beam.
The magnetic pinhole holder allows for easy replacement of the pinhole disks without the need for glue or other mounting methods.
The height of the optical axis is 5" above the rail or bench surface when mounted on a standard DataOptics carrier.
The micrometer motion is 0.025" per turn for units specified with English units and 0.50 mm per turn for metric units.