Linear Variable Filters for Continuous Wavelength Tuning

Did You Know?

Linear variable filters are made by deliberately depositing a thin-film coating with a thickness gradient. The transmitted wavelength of an interference filter scales with layer thickness, so a coating about twice as thick at one end shifts its spectral edge by roughly an octave, for example from about 400 nm to 800 nm. Placing an LVF directly on a linear detector array turns it into one of the smallest possible spectrometers, with no grating or moving parts.

Frequently Asked Questions

A linear variable filter is an optical interference filter whose coating thickness changes gradually along its length, so the cut-off or center wavelength shifts continuously from one end to the other. Positioning the beam at a given point on the filter selects the corresponding wavelength.

Overview of Linear Variable Filters

Linear Variable Filters (LVFs), also called continuously variable or wedge filters, are thin-film interference filters whose spectral edge or passband changes continuously along one dimension of the substrate. Instead of a single fixed cut-off or center wavelength, an LVF covers a whole wavelength range. Moving the filter, or the light beam, along its length selects the operating wavelength. This makes a single LVF a compact, solid-state alternative to a filter wheel or a set of discrete filters.

LVFs are available as shortpass, longpass, bandpass and dichroic (beamsplitter) types. Shortpass and longpass LVFs can be combined to build a tunable bandpass with adjustable center wavelength and bandwidth. Typical tuning ranges span the UV, visible and near-infrared, for example 320–850 nm or 400–1000 nm, over gradient lengths of a few tens of millimeters.

Key specifications

  • Tuning range (nm): the wavelength span covered along the filter length.
  • Gradient length (mm) and dispersion (nm/mm): how quickly the wavelength changes with position. Higher dispersion means a wider range in a shorter filter, but a larger change across the illuminated spot.
  • Transmission (%): average passband transmission, often lower at the UV end of the range.
  • Blocking (OD): out-of-band rejection, specified as optical density over a stated wavelength interval.
  • Edge steepness or bandwidth: transition width for edge filters; FWHM for bandpass LVFs.
  • Dimensions, substrate and angle of incidence: rectangular formats are common, and performance is specified for a given spot size and angle of incidence.

Applications of Linear Variable Filters
LVFs are used in compact and handheld spectrometers, tunable light sources and monochromators, hyperspectral and multispectral imaging, fluorescence excitation and emission selection, and spectral testing of detectors and cameras. On FindLight you can compare linear variable filters from manufacturers worldwide by tuning range, dispersion, transmission and blocking, and request quotes directly from suppliers without registration.