No parameters available.

LASER AND PHOTO DIODE SUB-MOUNTS
Remtec Inc
Remtec manufactures High performance metallized laser and photo diode submounts, accessory circuits and spacers to customer specification. Remtec’s submounts are produced on BeO and AIN ceramics usingPCTF® (Plated Copper on Thick Film) metallization. For less thermally demanding applications, alumina based materials are ...
Data Sheet
Luxtron m920 Series
Advanced Energy
The complete Luxtron® m920 series OEM solution is built using the electronics module assembly with two boards plus probes. The main board contains fiber optic temperature sensing channels, digital output (RS232 ASCII and RS485 Modbus), and power connection. The analog output board provides 0 to 10 V or 4 to 20 mA output and is ...
Data Sheet
Luxtron m924 OEM
Advanced Energy
Advanced Energy\'s Luxtron® m924 OEM module uses Fluoroptic® technology. It consists of the electronics module assembly plus Luxtron probes and accessories. The m924 provides precise and repeatable in-situ temperature measurements for control of processes involving RF, EMI, magnetic fields, and high voltages. ...
Data Sheet
Luxtron m924 Utility
Advanced Energy
The Luxtron® m924 utility module is one board that contains four fiber optic temperature sensing channels, RS232 ASCII and RS485 Modbus digital outputs, and 5 to 24 VDC power input connection. The m924 board conditions the measurement signal from Fluoroptic® probes and reports to the OEM control system. The custom ...
Data Sheet
The T-Rad is a microprocessor-based digital radiometer that includes a 12-bit ADC and unique DSP Lock-In Software. It is powered by a USB connection, which also acts as a Virtual COM port. When a THZ-B Terahertz Pyroelectric detector is plugged into the T-Rad module, the module reads the content of the head’s EEPROM, ...
  • Analog Output: BNC Connector 
  • Computer Connection: USB Port 
  • Trigger Input (TTL): BNC COnnector 
  • Compatible Detector Heads: THZ-B-DZ 
  • Full Scale Range: 200nW - 200mW 
Data Sheet
Photomultiplier Accessories
Proxi Vision
ProxiVision offers a variety of components to suit your individual need for operating the Customized Photomultipliers or Modules.
Data Sheet
The MCA51CP is a low cost high performance multi-channel analyser (MCA) base designed for gamma ray spectroscopy applications with NaI(Tl) scintillation detectors. The base consists of a high voltage power supply (HVPS) capable of supplying up to 2000V and a preamplifier. The unit is compatible with standard ...
Data Sheet