All Categories
Fiber Optics

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Optics Manufacturing
  3. Fiber Optics

Page 2 - Fiber Optics Manufacturing Equipment

NYFORS AutoStripper
3-Edge
Add to watch list
NYFORS AutoStripper
The AutoStripper™ is designed for fast, chemical free window stripping of optical fibers, using heated air to accomplish the often difficult task of window stripping fibers with acrylate coating diameters up to 550 μm. The AutoStripper™ meets the need for variable and multiple window strip lengths at high strength and ...

Specifications
Supported Fiber Cladding: 125-300um
Data Sheet
MULTIPACK-F Cleaver
Opticus
Add to watch list
MULTIPACK-F Cleaver
Swift MultiPack-F is designed to assemble Fusion Splice On Connectors and works with any standard fusion splicer. The  combination stripper With 4 functions, stripping, cleaning, cleaving and sleeving, are in this single unit. In addition to the fibre preparation tools the Multi‐Pack F includes a visible laser source and ...

Specifications
Supported Fiber Cladding: 250-900um
Data Sheet
CT30A Cleaver
Opticus
Add to watch list
CT30A Cleaver
The CT30A is a high quality fibre cleaving tool for use with fusion splicers.  The CT30A is the easiest to use fibre cleaver. The cleaver blade is pushed into position, the fibre is clamped in the v-groove and the cleaving arm is lowered to initiate the cleaving action. The design of the CT30A has been optimised so that every ...

Specifications
Supported Fiber Cladding: 250-900um
Data Sheet
CI-01 Cleaver
Opticus
Add to watch list
CI-01 Cleaver
The UCL Swift CI-01 is a low cost precision cleaver that gives superb results suitable for fusion splicing. This multi action cleaver is ideal if you are working within a budget or you are looking for a back up cleaver.  

Specifications
Supported Fiber Cladding: 250-900um
Data Sheet
CI-03BT Cleaver
Opticus
Add to watch list
CI-03BT Cleaver
The CI-03 is the best cleaver for field technicians, it is compact, has an integrated sharps collector, an autorotating blade which gives up to 75,000 cleaves and does not require the user to adjust the blade. The CI-03 uses an oil damper system to ensure the blade contacts the fibre at a steady speed. This reduces stress to the ...

Specifications
Supported Fiber Cladding: 250-900um
Data Sheet
AFL-70S+ Fusion Splicer Kit w/ Cleaver, Battery, AC, and Case
Ross FiberOptic
Add to watch list
AFL-70S+ Fusion Splicer Kit w/ Cleaver, Battery, AC, and Case
Call us to learn about terms like V-Groove, Active Clad Alignment, Core Alignment, and how they apply. Two of the most popular manufactures featured are Sumitomo and AFL/Fujikura. Products by other manufacturers such as Fitel are available on request. For Long Haul Telephony, Outside Plant, and CATV – CORE ALIGNMENT fusion ...

Specifications
Supported Fiber Diameter: 100-3000um
Data Sheet
Sumitomo Quantum TYPE-Q102-CA-KIT-2R Fusion Splicer Kit
Ross FiberOptic
Add to watch list
Sumitomo Quantum TYPE-Q102-CA-KIT-2R Fusion Splicer Kit
Call us to learn about terms like V-Groove, Active Clad Alignment, Core Alignment, and how they apply. Two of the most popular manufactures featured are Sumitomo and AFL/Fujikura. Products by other manufacturers such as Fitel are available on request. For Long Haul Telephony, Outside Plant, and CATV – CORE ALIGNMENT fusion ...

Specifications
Supported Fiber Diameter: 100-1000um
Data Sheet
Angle Cleaving Unit2
Nyfors
Add to watch list
Angle Cleaving Unit2
The AUTOCLEAVER S2™ is an automatic system for precision cleaving of sensitive air-clad and microstructured fiber. It has a specially designed clamping system with air pressure controlled force regulation that enables it to clamp and hold also brittle specialty fibers that might otherwise be damaged during cleaving. It is ...

Specifications
Supported Fiber Cladding: 1-10um
Data Sheet
AUTOCLEAVER S1
Nyfors
Add to watch list
AUTOCLEAVER S1
This ultra high precision cleaver is specially designed for production applications where close control of bare fiber length after cleaving is required. It senses the edge of the coating and automatically adjusts the cleave point to meet a specific bare fiber length with high precision. This length is specified by the customer at ...

Specifications
Supported Fiber Cladding: 0-500um
Data Sheet
AUTOCLEAVER S2
Nyfors
Add to watch list
AUTOCLEAVER S2
The AUTOCLEAVER S2™ is an automatic system for precision cleaving of sensitive air-clad and microstructured fiber. It has a specially designed clamping system with air pressure controlled force regulation that enables it to clamp and hold also brittle specialty fibers that might otherwise be damaged during cleaving. It is ...

Specifications
Supported Fiber Cladding: 1-1um
Data Sheet
AUTOCLEAVER LDA
Nyfors
Add to watch list
AUTOCLEAVER LDA
The AUTOCLEAVER LDA™ is an automatic system for precision cleaving of circular large diameter fibers (LDF). It is designed to provide both perpendicular and angled cleaving capability on fibers ranging from 230 up to more than 800 µm in diameter. The cleave angle is set using a micrometer screw positioner allowing ...

Specifications
Supported Fiber Cladding: 230-800um
Data Sheet
AUTOCLEAVER LDF
Nyfors
Add to watch list
AUTOCLEAVER LDF
This fully automated optical fiber cleaver is designed for fast and flexible large diameter fiber processing in factory and laboratory environments. Easily interchangeable fiber handling parts enable high precision cleaving of different circular fibers in the range from 230 µm up to 1000 µm cladding diameter with industry ...

Specifications
Supported Fiber Cladding: 230-1000um
Data Sheet
AUTOCLEAVER
Nyfors
Add to watch list
AUTOCLEAVER
The AUTOCLEAVER™ is a fully automatic, ultra high-precision fiber cleaver with a typical cleave angle of less than 0.3 degrees. It is designed for industrial applications where high accuracy, reliability and a high production yield are required. A built-in microprocessor controls all parameters and settings such as fiber ...

Specifications
Supported Fiber Cladding: 80-230um
Data Sheet
AUTOCLEAVER LDF-M
Nyfors
Add to watch list
AUTOCLEAVER LDF-M
The AUTOCLEAVER LDF-M™ is a high precision fiber cleaver designed for cleaving of standard to large diameter fibers (LDF) in production and laboratory environments. It provides outstanding cleaving performance on fibers with cladding diameters from 80 μm up to more than 600 μm. A unique and patent pending cleaving ...

Specifications
Supported Fiber Cladding: 80-600um
Data Sheet
MINICLEAVER
Nyfors
Add to watch list
MINICLEAVER
The small and light weight MINICLEAVER™ is designed to provide versatile fiber cleaving capability in settings where portability and consistent cleaving results are required. It features a built-in battery and is well suited for use both in field splicing and in laboratory or production environments where available space is limited. ...

Specifications
Supported Fiber Cladding: 125-400um
Data Sheet
ProCleave SD ELECTRONIC FIBER CLEAVER
3SAE Technologies
Add to watch list
ProCleave SD ELECTRONIC FIBER CLEAVER
The ProCleave SD is an advanced electronic fiber cleaver for fibers up to 250 μm. The cleaver is specifically designed for use in production lines where ease-of-use, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments. The ProCleave SD is utilizing an advanced ...

Specifications
Supported Fiber Cladding: 80-250um
Data Sheet
ProCleave LD II AUTOMATIC FIBER CLEAVER
3SAE Technologies
Add to watch list
ProCleave LD II AUTOMATIC FIBER CLEAVER
The ProCleave LD II is an automatic and highly advanced fiber cleaver for large diameter fibers up to 550 μm. The cleaver is specifically designed for use in production lines where ease-ofuse, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments. ProCleave LD II ...

Specifications
Supported Fiber Cladding: 125-550um
Data Sheet
LIQUID CLAMP CLEAVER II LDF
3SAE Technologies
Add to watch list
LIQUID CLAMP CLEAVER II LDF
The 3SAE Liquid Clamp Cleaver II LDF, is the most advanced large diameter ber cleaver for circular and shaped bers from 125 μm to 1000 μm. It is available in two dierent models, the Liquid Clamp Cleaver II-S (LCC II-S) and Liquid Clamp Cleaver II-A (LCC II-A). The LCC II-S is designed for standard, non-angle cleaving while the LCC ...

Specifications
Supported Fiber Cladding: 125-1000um
Data Sheet
LARGE DIAMETER SPLICING SYSTEM LDS 2.5
3SAE Technologies
Add to watch list
LARGE DIAMETER SPLICING SYSTEM LDS 2.5
Utilizing precision engineering, over 20 years of ber splicing and glass processing experience 3SAE Technologies developed the LDS 2.5, glass processing system. Whether the application is splicing of ber end caps, tapering, high power ber laser component fabrication (such as mode eld adapters, pump combiners and pump/signal ...

Specifications
Supported Fiber Diameter: 125-2500um
Data Sheet
NORIA Fiber Bragg Grating Manufacturing Solution
3SAE Technologies
Add to watch list
NORIA Fiber Bragg Grating Manufacturing Solution
The NORIA tool is a manufacturing tool to produce Fiber Bragg Gratings (FBGs). A Deep Ultra Violet laser (Coherent Excistar XS 500Hz—ArF) and a phase mask (Ibsen Photonics) are used to transfer a periodic pattern into the core of a photosensitive optical fiber. The NORIA tool holds a number of different masks in a revolver like ...

Specifications
Length: 0.01 m
Side Lobe Suppression Ratio: 15 dB
Refection Coefficient: 15 %
Cycle Time: 30 sec
Data Sheet