LIQUID CLAMP CLEAVER II LDF
Description
The 3SAE Liquid Clamp Cleaver II LDF, is the most advanced large diameter ber cleaver for circular and shaped bers from 125 μm to 1000 μm. It is available in two dierent models, the Liquid Clamp Cleaver II-S (LCC II-S) and Liquid Clamp Cleaver II-A (LCC II-A). The LCC II-S is designed for standard, non-angle cleaving while the LCC II-A features angle cleaving with rotation up to 30°. The primary cause of bad cleave angles is torsional strain in the ber, induced by torque from conventional clamps. This patented process features a completely torque-free clamping system, which uses a proprietary metal alloy ingot that melts at less than the boiling point of water. This is a lead-free, cadmium-free alloy ingot specially formulated to solidify tightly around the optical ber when cooled, providing torque-free clamping, even on non-round bers such as Octagonal shape. A solid-state temperature control system rapidly liquees and solidies the alloy as needed. When the alloy ingot is depleted by use, it can be easily replaced. These unique alloy ingots are available exclusively from 3SAE Technologies.
LIQUID CLAMP CLEAVER II LDF
Specifications |
|
|---|---|
| Supported Fiber Cladding: | 125-1000um |
Features
Angled Cleaver with up to 30° of fiber rotation and the ability to cleave ber up to 1 mm in diameter. (LCC II-A only)
Circular and shaped fiber compatible
Lowest mean cleave angles available
Lowest standard deviation available
Fiber holder compatible (16mm F/H standard, 18mm F/H with fiber holder adaptor plate)
Extended blade life
Integrated vision system for blade, backstop and fiber alignment.
Stores up to 10 programs
USB PC connection required for integrated vision system
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim 3SAE Technologies Page to edit and add data
Frequently Asked Questions
The Liquid Clamp Cleaver II LDF uses a proprietary metal alloy ingot that melts at less than the boiling point of water. This is a lead-free, cadmium-free alloy ingot specially formulated to solidify tightly around the optical fiber when cooled, providing torque-free clamping, even on non-round fibers such as Octagonal shape.
The Liquid Clamp Cleaver II-S is designed for standard, non-angle cleaving, while the Liquid Clamp Cleaver II-A features angle cleaving with rotation up to 30°.
The Liquid Clamp Cleaver II LDF can cleave fibers from 125 μm to 1000 μm in diameter.
The primary cause of bad cleave angles is torsional strain in the fiber, induced by torque from conventional clamps.
The Liquid Clamp Cleaver II LDF features an integrated vision system for blade, backstop, and fiber alignment. Alignment of the blade, backstop, and fiber is achieved via the integrated side angle view vision system (requires PC connection).