Time And Space Correlated Single Photon Counting MCP Based With Delay Line Anode FLIM Detector
Description
Time and Space Correlated Single Photon Counting (TSCSPC) MCP based with delay line anode FLIM Detector. The detector has a 25 mm diameter Photec germanium-anode MCP-detector head (LNS20 photocathode with < 500 cps dark counts) with crossed-delay line (DL) XY photon position redout und low-noise proprietory detector electronics (timing amplifier and high voltage divider). Additional information can be found at www.europhoton.de. Assistance with interfacing detector head and readout electronics is provided.
Time And Space Correlated Single Photon Counting MCP Based With Delay Line Anode FLIM Detector
Specifications |
|
|---|---|
| Active Diameter: | 25 mm |
| Peak Quantum Efficiency: | 10 % |
| Spectral Range: | 230-900nm |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
-
Sold by:
-
On FindLight:
External Vendor
Claim Europhoton GmbH Page to edit and add data
Frequently Asked Questions
The Time and Space Correlated Single Photon Counting (TSCSPC) MCP based with delay line anode FLIM Detector is a device used for photon counting and imaging applications. It has a 25 mm diameter Photec germanium-anode MCP-detector head with crossed-delay line XY photon position readout and low-noise detector electronics.
The specifications of the TSCSPC system include an IRF (time) of less than 80 ps FWHM, an IRF (space) of less than 100 μm FWHM, a throughput of 1x105 cps, a dark signal of less than 500 cps, a dynamic range of greater than 105, and a quantum efficiency (Q(eff)) of 10% at 550 nm and 20% at 450 nm.
Yes, the TSCSPC system can be used for single molecule observation. It is capable of observing single molecules of R6G/H2O at excitation wavelength of 532 nm and emission wavelength greater than 532 nm.
Yes, there is a limited warranty of 1 year provided for the TSCSPC system. However, excess light damage is not covered under the warranty.
Yes, test and acceptance measurements can be performed at EuroPhoton. Assistance with interfacing the detector head and readout electronics is also provided.