All Categories
Fiber Lasers

FILTER PRODUCTS

to
to
to
to
to
  1. Home
  2. Lasers
  3. Fiber Lasers
  4. CW Fiber Lasers

Page 8 - CW Fiber Lasers

X-Band Tunable Fiber Laser
WL Photonics Inc.
Add to watch list
X-Band Tunable Fiber Laser
Compare
Tunable Fiber Laser of WLTL-series is built on proprietary design. The laser is consisting mainly of a gain block and frequency selection engine. Each of the elements is configurable to specific requirements, which leaves abundant options to implement variations of tuning range and optical output power. Wavelength tuning is achieved ...

Specifications
Center Wavelength: 1060 nm
Output Power: 0.005 W
Beam Quality (M^2): N/A
Data Sheet
MFL-3500 Compact Widely Tunable Mid-IR Fibre Laser
Mirage Photonics
Add to watch list
MFL-3500 Compact Widely Tunable Mid-IR Fibre Laser
Compare
The MFL-3500 is the first compact, turn-key mid infrared fibre laser. Based on the highly efficient, patented dual wavelength pumping technology, the MFL-3500 outputs up to 1 W of continuous power from a single-mode fibre, delivering reliable mid infrared light to wherever it is needed. An automated grating allows an ultra wide ...

Specifications
Center Wavelength: 3555 nm
Output Power: 1 W
Beam Quality (M^2): 1.1
Wavelength Range: 3.33-3.78 um
Data Sheet
Thulium Fiber Laser 250 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 250 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 250 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 200 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 200 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high power, high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x ...

Specifications
Center Wavelength: 2000 nm
Output Power: 200 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 50 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 50 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 50 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 40 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 40 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 40 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 30 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 30 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 30 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 20 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 20 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 20 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 10 W
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 10 W
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 10 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 30 W Polarized
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 30 W Polarized
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 30 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 20 W Polarized
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 20 W Polarized
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 20 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Thulium Fiber Laser 10 W Polarized
Futonics Laser GmbH
Add to watch list
Thulium Fiber Laser 10 W Polarized
Compare
The new Industrial Fiber Laser product line by Futonics is based on Thulium single-mode 2 µm fiber laser oscillators with wavelength stabilization by Fiber Bragg Gratings (FBG). Due to high beam quality and compact design, these new products are highly suitable for a broad range of applications. Dimensions: 483 mm x 88 mm x 505 ...

Specifications
Center Wavelength: 2000 nm
Output Power: 10 W
Beam Quality (M^2): 1.2
Wavelength: 2050 nm
Data Sheet
Firebow RT90 2 Micron Tunable Laser
Q-Peak Inc.
Add to watch list
Firebow RT90 2 Micron Tunable Laser
Compare
Q-Peak’s Firebow RT90 laser offers one of the first tunable, Tm:fiber-based, 2-μm lasers in a fully adaptive architecture designed for CW and mode-locked laser capabilities. The Firebow Series covers a large variety of applications, including materials characterization, gas detection, biomedical imaging,and unique ...

Specifications
Center Wavelength: 2005 nm
Output Power: 0.01 W
Beam Quality (M^2): N/A
Data Sheet
Firebow CW10-500 Tm:Fiber CW Laser
Q-Peak Inc.
Add to watch list
Firebow CW10-500 Tm:Fiber CW Laser
Compare
Q-Peak’s Firebow CW 10-500 laser is a Tm:fiber based, compact, air-cooled unit containing resonator components, a pump diode, a diode driver, and a temperature controller in a single enclosure. The output fiber is end capped and has a FC/APC connector. The system design allows for power scaling up to 500 W with ...

Specifications
Center Wavelength: 2000 nm
Output Power: 10 W
Beam Quality (M^2): 1.2
Data Sheet
1064nm High Power Fiber Laser
Amonics Limited
Add to watch list
1064nm High Power Fiber Laser
Compare
Amonics’ Fiber Laser (AFL) is a compact standalone turnkey equipment to deliver up to 50W output power and 1mJ pulse energy in 1064nm and 1550nm range under CW or pulse operation. Based on proprietary all fiber design, Amonics fiberlaser is maintenance free. No post-installation service is required. In pulse operation, the laser ...

Specifications
Center Wavelength: 1064 nm
Output Power: 20 W
Beam Quality (M^2): 1.1
Data Sheet
Fibralite OEM Raman Fiber Laser
AMS Technologies
Add to watch list
Fibralite OEM Raman Fiber Laser
Compare
Keopsys offers a wide range of OEM Raman fiber Lasers at various emitting wavelengths ranging from 1110 to 1650nm with output power up to 8W. These products are well suited for distributed Raman amplification, remote EDFA pumping or fiber optic component testing. Keopsys expertise on double cladding fiber technology and power ...

Specifications
Center Wavelength: 1650 nm
Output Power: 8 W
Beam Quality (M^2): --
Data Sheet
LYRA 100 Fiber Laser
AMS Technologies
Add to watch list
LYRA 100 Fiber Laser
Compare
AMS Technologies LYRA 100 Fiber Laser. This CW fiber laser is designed for applications in laser-material processing, such as welding, marking, engraving, micromachining, etc. 

Specifications
Center Wavelength: 1080 nm
Output Power: 100 W
Beam Quality (M^2): 1.1
Data Sheet
High-Power Industrial Fiber Laser CFL-6000
NLight
Add to watch list
High-Power Industrial Fiber Laser CFL-6000
Compare
The all-new nLIGHT® CFL-6000, CFL-8000, and CFL-10000 are the highest power fiber lasers available in this form factor, allowing for better utilization of your shop floor. Available as 6, 8, or 10kW models, these versatile fiber lasers are suitable for a wide range of materials processing applications. Based on nearly two decades of ...

Specifications
Center Wavelength: 1070 nm
Output Power: 6000 W
Beam Quality (M^2): --
Data Sheet
nLight High-Performance Industrial Fiber Laser CFL-3000
NLight
Add to watch list
nLight High-Performance Industrial Fiber Laser CFL-3000
Compare
The all-new nLIGHT® CFL-3000, CFL-4000, and CFL-5000 are the highest power fiber lasers available in this form factor, allowing for better utilization of your shop floor. Available as 3, 4, or 5kW models, these versatile fiber lasers are suitable for a wide range of materials processing applications. Based on nearly two decades of ...

Specifications
Center Wavelength: 1070 nm
Output Power: 3000 W
Beam Quality (M^2): --
Data Sheet
nLIGHT Compact Fiber Laser CFL-2000
NLight
Add to watch list
nLIGHT Compact Fiber Laser CFL-2000
Compare
The compact nLIGHT® fiber laser family delivers the highest power in the smallest footprint up to 3kW. A modulation rate up to 100 kHz and rise and fall times of less than 5 µs provide improved cutting and welding performance. These compact nLIGHT fiber lasers feature true hardware-based back reflection protection, easy onsite ...

Specifications
Center Wavelength: 1070 nm
Output Power: 2000 W
Beam Quality (M^2): --
Data Sheet
nLIGHT Multimode Rackmount Fiber Laser CFL-500
NLight
Add to watch list
nLIGHT Multimode Rackmount Fiber Laser CFL-500
Compare
The nLIGHT family of multimode rackmount fiber lasers delivers power outputs from 500W to 1500W with multiple fiber options and excellent beam quality for advanced cutting, welding and additive manufacturing performance. The small size of these fiber laser facilitates easy integration into machine tools. nLIGHT rackmount fiber lasers ...

Specifications
Center Wavelength: 1070 nm
Output Power: 500 W
Beam Quality (M^2): --
Data Sheet
nLIGHT Single Mode Rackmount Fiber Laser CFL-500
NLight
Add to watch list
nLIGHT Single Mode Rackmount Fiber Laser CFL-500
Compare
The nLIGHT® family of single mode rackmount fiber lasers deliver power outputs from 500W to 1200W with beam quality of M2 ≤ 1.1 for advanced cutting, welding and additive manufacturing. The small size of these laser facilitates easy integration into machine tools. nLIGHT rackmount fiber lasers feature true hardware-based back ...

Specifications
Center Wavelength: 1070 nm
Output Power: 500 W
Beam Quality (M^2): 1.1
nLight NL-M100-200-QCW-A Fiber Laser
NLight
Add to watch list
nLight NL-M100-200-QCW-A Fiber Laser
Compare
nLIGHT’s medium power CW/QCW Fiber Laser outputs a near diffraction limited CW or QCW 1090nm beam. Designed to meet maintenance-free 24/7 industrial operation, the air-cooled system offers a high brightness solution to meet the rigors of the laser material processing industry.

Specifications
Center Wavelength: 1090 nm
Output Power: 200 W
Beam Quality (M^2): 1.1
Data Sheet
TRUMPF TruFiber 1000 Laser
Trumpf
Add to watch list
TRUMPF TruFiber 1000 Laser
Compare
TRUMPF TruFiber 1000W 1070nm CW fiber laser. This fiber laser is used in laser-material processing applications, micromachining, etc. 

Specifications
Center Wavelength: 1070 nm
Output Power: 1000 W
Beam Quality (M^2): 1.1
Data Sheet
TRUMPF TruFiber 500 Laser
Trumpf
Add to watch list
TRUMPF TruFiber 500 Laser
Compare
TRUMPF TruFiber 500W 1070nm CW fiber laser. This fiber laser is used in laser-material processing applications, micromachining, etc.

Specifications
Center Wavelength: 1070 nm
Output Power: 500 W
Beam Quality (M^2): 1.1
Data Sheet