FILTER PRODUCTS

to
to

Infrared (IR) Integrated LED Modules

The Dual Wavelength LED Source by OZ Optics is a rugged, compact, and lightweight device that offers two optical sources in a single package. It is designed for testing and maintaining fiber optic networks, measuring insertion loss, calibrating optical receivers, and conducting laboratory research. The source is available in three ...

Specifications

LED Color Category: Infrared (IR)
Wavelength: 1550 nm
Output Power (typical): 0.02 mW
Operation Mode: Continuous Wave (CW), Modulated
Dual Wavelength Options: 850 and 1550 nm
...
Data Sheet
COB is the indispensable fiber optic LED light source in any university, laboratory, research center or R&D department. It has been designed and conceived by Pyroistech for day-to-day work. It is a silent, compact LED light source with a design that will not go unnoticed.

Specifications

LED Color Category: Ultraviolet (UV), Visible, Infrared (IR), White Light, Red, Orange, Yellow, Green, Blue, Violet, Purple
Wavelength: 270 - 1050 nm
Output Power (typical): 10 mW
Operation Mode: Continuous Wave (CW), Pulsed
Data Sheet
The ALS handheld optical fiber source is used with an Optical Power Meter to measure the loss of multimode optical fiber systems, in applications which require 85/85% Limited Phase Space modal launch conditions. the ALS provides excellent stability and ease of use.   The 85/85% modal launch condition is used ...

Specifications

LED Color Category: Infrared (IR)
Wavelength: 1300 nm
Output Power (typical): -- mW
Operation Mode: Continuous Wave (CW), Modulated
Source Type: LED
...
Data Sheet
HPLS-45AD3500-DIP High Power LED Light Sources
Lightspeed Technologies Inc
The HPLS-45 series of high power LED light sources are designed as flexible system of interchangeable components for applications where it is hard to standardize the requirements for mass-production. Building a system comes down to (1) selection of appropriate base with specific functionality and type of control; (2) selection of LED ...

Specifications

LED Color Category: Ultraviolet (UV), Visible, Infrared (IR)
Wavelength: 455 nm
Output Power (typical): -- mW
Operation Mode: Continuous Wave (CW)
Data Sheet
HPLS-35DD7500-2C Two Channel High Speed Driver
Lightspeed Technologies Inc
The HPLS-35 drivers provide multiple independent DD7500 drivers in in compact modules.  Two Channels (-2C) and four channel (-4C) configurations provide intensely bright flashes from 1μs to 40μs duration with a 3% duty cycle.  Optically isolated inputs accept 3-24V inputs and the flash is on for the duration of the ...

Specifications

LED Color Category: Ultraviolet (UV), Visible, Infrared (IR)
Wavelength: -- nm
Output Power (typical): 5250 mW
Operation Mode: Continuous Wave (CW)
Data Sheet
HPLS-36AD3500 Single Emitter With Built in Driver
Lightspeed Technologies Inc
The HPLS­36 series of high power LED light sources are designed as flexible system of interchangeable components  for applications where it is hard to standardize the requirements for mass­production. Building a system comes down to (1) selection of appropriate base with specific functionality and type of ...

Specifications

LED Color Category: Ultraviolet (UV), Visible, Infrared (IR)
Wavelength: 455 nm
Output Power (typical): 400 mW
Operation Mode: Continuous Wave (CW)
Data Sheet
Lambda XL Extended Life Light Source
SUTTER INSTRUMENT
The Lambda XL is a broad spectrum, highly stable light source with a ±1% peak-to-peak fluctuation. The connection to the microscope is made through a liquid light guide, which assures output uniformity in the field of view. Two light guide options are available, one optimized for the near UV-visible and the other for the visible-near ...

Specifications

LED Color Category: Visible, Infrared (IR)
Wavelength: N/A nm
Output Power (typical): N/A mW
Operation Mode: Continuous Wave (CW)
Data Sheet
MM Fiber Output LED Source IR 950 nm
Craft Center Sawaki Inc
FOLS-01 is an ultra-compact LED light source with output fiber, LED chip, driving circuit and power supply.

Specifications

LED Color Category: Infrared (IR)
Wavelength: 950 nm
Output Power (typical): 15 mW
Operation Mode: Continuous Wave (CW)
Data Sheet
MM Fiber Output LED Source IR 1300 nm
Craft Center Sawaki Inc
FOLS-01 is an ultra-compact LED light source with output fiber, LED chip, driving circuit and power supply.

Specifications

LED Color Category: Infrared (IR)
Wavelength: 1300 nm
Output Power (typical): 0.5 mW
Operation Mode: Continuous Wave (CW)
Data Sheet
FOLED-M 1000 Light Source
LEJ
The FOLED 800, 1000 and 1600 OEM modules are designed and electrically prepared for use in medical environments. Various analog and digital interfaces facilitate process control. The modern driver technology allows analogue brightness control and fast pulsing of high-power LEDs via Ethernet or USB, as well as the implementation of an ...

Specifications

LED Color Category: Visible, Infrared (IR), White Light
Wavelength: 400 - 700 nm
Output Power (typical): -- mW
Operation Mode: Continuous Wave (CW), Modulated
Data Sheet
FOLED-M 800 Light Source
LEJ
The FOLED 800, 1000 and 1600 OEM modules are designed and electrically prepared for use in medical environments. Various analog and digital interfaces facilitate process control. The modern driver technology allows analogue brightness control and fast pulsing of high-power LEDs via Ethernet or USB, as well as the implementation of an ...

Specifications

LED Color Category: Visible, Infrared (IR), White Light
Wavelength: 400 - 700 nm
Output Power (typical): -- mW
Operation Mode: Continuous Wave (CW), Modulated
Data Sheet
The ALS handheld optical fiber source is used with an Optical Power Meter to measure the loss of multimode optical fiber systems, in applications which require 85/85% Limited Phase Space modal launch conditions. the ALS provides excellent stability and ease of use. The 85/85% modal launch condition is used specifically in ...

Specifications

LED Color Category: Infrared (IR)
Wavelength: 850 nm
Output Power (typical): 10 mW
Operation Mode: Continuous Wave (CW), Modulated
Data Sheet
The ALS handheld optical fiber source is used with an Optical Power Meter to measure the loss of multimode optical fiber systems, in applications which require 85/85% Limited Phase Space modal launch conditions. the ALS provides excellent stability and ease of use. The 85/85% modal launch condition is used specifically in ...

Specifications

LED Color Category: Infrared (IR)
Wavelength: 850 nm
Output Power (typical): -- mW
Operation Mode: Continuous Wave (CW), Modulated
Data Sheet
The ALS handheld optical fiber source is used with an Optical Power Meter to measure the loss of multimode optical fiber systems, in applications which require 85/85% Limited Phase Space modal launch conditions. the ALS provides excellent stability and ease of use. The 85/85% modal launch condition is used specifically in ...

Specifications

LED Color Category: Infrared (IR)
Wavelength: 1300 nm
Output Power (typical): -- mW
Operation Mode: Continuous Wave (CW), Modulated
Data Sheet
On FindLight marketplace you will find 14 different Infrared (IR) Integrated LED Modules from suppliers around the world. With just a few clicks you can compare different Infrared (IR) Integrated LED Modules and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.