CFC-400-SMA Connectorized Fiber Cleaver
Description
CFC-400-SMA is an automated cleaver designed to create a flat cleave an optical fiber that is mounted in an SMA-905 connector. It produces a high-quality, clean fiber end face with a polish-like finish in a fraction of a second. There is no polishing residue and therefore no post-processing necessary. This quick and efficient system is ideal for high-volume connectorized fiber cleaving applications in markets ranging from medical and fiber laser to telecommunications. CFC-400-SMA uses our well-proven tension-and-scribe technology to produce consistent cleaves with mirror-quality end-face finishes. It features programmable cleave tension and scribe conditions specifically suited for cleaving connectorized fibers. Fiber diameter can range from 80 microns to 1 mm.
CFC-400-SMA Connectorized Fiber Cleaver
Specifications |
|
|---|---|
| Supported Fiber Cladding: | 80-1000um |
Features
Tension-and-scribe methodLow-angle -- critical for high-performance mirror-quality cleaving
Programmable cleave parametersAccommodates a wide range of fiber sizes (80 µm to 1 mm in diameter)
Precision controlled scribing processRepeatable, consistent and accurate cleaves
Remote controlled tension, velocity, oscillation, scribe delayHandset controller gives user full control over the cleave process
Fiber holding blocks for accurate fiber positioning and clampingResults in highest fiber quality and process repeatability
Adjustable mechanical slideEnables precise control of cleave position
Applications
Telecommunications
Fiber Laser
Sensing
Medical
Aerospace and Defense
Research
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Vytran Page to edit and add data
Frequently Asked Questions
No, there is no polishing residue and therefore no post-processing necessary after using the CFC-400-SMA.
The CFC-400-SMA is ideal for high-volume connectorized fiber cleaving applications in markets ranging from medical and fiber laser to telecommunications.
The CFC-400-SMA Connectorized Fiber Cleaver is an automated cleaver designed to create a flat cleave an optical fiber that is mounted in an SMA-905 connector.
The CFC-400-SMA can accommodate a wide range of fiber sizes, from 80 µm to 1 mm in diameter.
The CFC-400-SMA uses a tension-and-scribe method to produce consistent cleaves with mirror-quality end-face finishes.