FILTRABOX MICRO Multi-Stage Fume Extraction
Description
FILTRABOX MICRO Multi-Stage Fume Extraction
Specifications |
|
|---|---|
| Air Flow: | 128 m^3/h |
| Inluded Filters: | Pre-Filter, HEPA Filter, Active Carbon Filter, Other (see Data Sheet) |
| Compatible Laser Machines: | Laser Cutting, Laser Marking, Laser Engraving, Laser Welding, Laser Cleaning, Laser Soldering, Laser Micromachining, Laser Dicing, Laser Drilling, Plasma Cutting, Laser Lift-Off |
| Power Consumption: | 700 W |
| Electrical Requirements: | 120V - 60Hz, 230V - 60Hz |
| Noise Level: | 55 dB |
| Dimensions (HxWxD): | 660x254x432 mm |
| Weight: | 34 kg |
| Certification: | Not Specified |
| Blower Type: | 1x Brushless |
| Frequency: | 50/60 Hz |
| Pressure: InH2O: | 80 |
| Construction: | Steel |
Features
- Multi-Stage (3) filtration medias removes fumes and odors of airborne particulates without venting outside
- Best In Class Filters: 1. Pre-Filter (Class F9 6m2), 2. HEPA Filter (Class H14 6m2), 3. Gas Filter:Oxy-Carbon 20lbs.
- Quick-Release Filter Modules for fast / easy access and service. No doors, stacking or digging into dusty cabinets!
- Low cost replacement filtration medias
- Replacement filters are replaceable typically every 6 months but varies depending on daily use.
- Removes virtually ANY laser processing smells and odors INCLUDING acrylic, rubber, and leather
- Lightweight for cost-effective shipping
- 1- Year warranty on all parts excluding filtration medias
Applications
- Removes virtually ANY laser processing smells and odors
- Lightweight for cost-effective shipping
- Quick-Release Filter Modules for fast / easy access and service
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Boss Laser Page to edit and add data
Frequently Asked Questions
The FILTRABOX MICRO Multi-Stage Fume Extraction is used to remove fumes and odors of airborne particulates generated during laser processing.
The FILTRABOX MICRO uses three filtration medias: a Pre-Filter (Class F9 6m2), a HEPA Filter (Class H14 6m2), and a Gas Filter (Oxy-Carbon 20lbs).
The filters in the FILTRABOX MICRO typically need to be replaced every 6 months, but the frequency may vary depending on daily use.
Yes, the FILTRABOX MICRO offers an affordable solution for filtrating without the necessity of venting outside, making it suitable for use in confined spaces.
The FILTRABOX MICRO comes with a 1-year warranty on all parts excluding the filtration medias.