FILTRABOX COMPACT X Multi-stage Laser Fume Extraction
Description
FILTRABOX COMPACT X Multi-stage Laser Fume Extraction
Specifications |
|
|---|---|
| Air Flow: | 235 m^3/h |
| Inluded Filters: | Pre-Filter, HEPA Filter, Active Carbon Filter, Other (see Data Sheet) |
| Compatible Laser Machines: | Laser Cutting, Laser Marking, Laser Engraving, Laser Welding, Laser Cleaning, Laser Soldering, Laser Micromachining, Laser Dicing, Laser Drilling, Plasma Cutting, Laser Lift-Off |
| Power Consumption: | 1100 W |
| Electrical Requirements: | 120V - 60Hz, 240V - 50Hz |
| Noise Level: | 50 dB |
| Dimensions (HxWxD): | 746x395x mm |
| Weight: | 59 kg |
| Certification: | Not Specified |
| Blower Type: | 1x Brushless |
| Frequency: | 50/60 Hz |
| Pressure: (in. H2O): | 42 |
| Construction: | Steel |
Features
- Industrial Multi-Stage filtration medias removes fumes and odors up to 99.999% of airborne particulates
- Patented AirFlow design pulls air from the top up through the filters instead of pushing air from the bottom for maximum filtration
- Large Activated Carbon Filter adsorbs vapors and odorous or colored substances from gases
- Industrial exhaust fan 235 CFM with venting (measured to only 50 dB of noise)
- Locking casters for easy mobility
- Low cost replacement filtration medias
- For a detailed look of how contaminated air is filtered and recirculated click the image above. Call us to discuss the material(s) you will process.
- Replacement filters are replaceable typically every 6 months but varies depending on daily use.
- 1X brushless motors rated at 10,000 hours for industrial use
- Removes virtually ANY laser processing smells and odors including acrylic, rubber, and leather
- 1 Year warranty on all parts excluding filtration medias
Applications
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Boss Laser Page to edit and add data
Frequently Asked Questions
The FILTRABOX COMPACT X is used for extracting fumes and odors, including those produced during laser cutting, from confined areas or office environments.
The multi-stage filtration system of the FILTRABOX COMPACT X removes up to 99.999% of airborne particulates, ensuring efficient removal of fumes and odors.
The replacement filters for the FILTRABOX COMPACT X typically need to be replaced every 6 months, although the frequency may vary depending on daily use.
Yes, the FILTRABOX COMPACT X can remove virtually any laser processing smells and odors, including those from acrylic, rubber, and leather.
Yes, the FILTRABOX COMPACT X comes with a 1-year warranty on all parts excluding the filtration medias.