Cross Polarized Light Generation Crystal - BaF2 - 540-7115 Series
Cross-Polarized Wave (XPW) generation is a nonlinear third order process during which fundamental and generated waves have the same frequency; however, generated wave is perpendicularly polarized to pump wave polarization. Phase matching occurs over large bandwidth in XPW generation process. This means the same phase and group velocities for fundamental wave and XPW.
Cross-polarized wave (XPW) generation process is driven by the third order nonlinearity of the crystal, and the anisotropy of the tensor. The typical optical material used for cross-polarized wave (XPW) generation is Barium Fluoride (BaF2) crystal with z () or holographic () crystallographic orientation. Theory predicts a maximum XPW energy conversion efficiency around 35% when using -cut BaF2 crystal with a concomitant pulse shortening factor of √3 corresponding to a pure third-order nonlinear process.
- Type Of Crystal: BaF2
- Transmission Range: 0.135 - 15 um
- Height: 10 mm
- Width: 10 mm
- Thickness: 1.5 mm
- Surface Quality (Scratch-Dig): 60-40
- Surface Flatness: <= Lambda/2
EKSMA OPTICS offers  orientation BaF2 optical crystals (XPW crystals) for Cross-Polarized Wave (XPW) generation. BaF2 optical crystals with orientation  as well CaF2 optical crystals are available on request.
You may also like
MgF2 CrystalsHG Optronics, Inc.
Calcium Fluoride CaF2Rain Group
Zinc Sulfide FLIR ZnSRain Group
Zinc Selenide ZnSeRain Group
Cross Polarized Light Generation Crystal - BaF2 - 540-7125 SeriesAltos Photonics, Inc.
EKSMA Cross Polarized Light Generation Crystal - BaF2 - 540-7120 SeriesAltos Photonics, Inc.
EKSMA Cross Polarized Light Generation Crystal - BaF2 - 540-7110 SeriesAltos Photonics, Inc.
Cross Polarized Light Generation Crystal - BaF2 - 540-7105 SeriesAltos Photonics, Inc.