Frequently Asked Questions

The MPA series module is used for producing up to 20W continuous wave RF signals with low heat consumption and high temperature reliability, suitable for various types of fixed lasers.

The available frequencies for the MPA series module are 27.12MHz, 40.68MHz, 68MHz, 80MHz, and 110MHz.

The power supply voltage options for the MPA series are usually +12Vdc or +24Vdc, but they can be set according to actual needs.

The RF output power can be adjusted through the UART port, from 20W to 0W.

The temperature detection range is from -40 degrees to 105 degrees, with an error of +/-3 degrees.

The operating ambient temperature range for the MPA series is -10℃ to +55℃.

The module's net weight is about 100g, and it is treated with aluminum conductive oxidation. It needs to be fixed to the heat sink with four screws, and thermal conductive silicone grease should be applied to the bottom for good heat dissipation.

You May Also Like