Mercury Series – M1500H
Description
Reduce the cost and size of your system, and increase its performance all at once. MicroE Systems’ Mercury 1500 kit encoders are available in two styles. The M1500S, an RS-422 compliant 15 pin standard D-sub connector and the M1500H, an RS-422 compatible 5x2 micro-connector for tight spaces.
Simply stated, the M1500 is smaller, higher performance, faster to install, and easier to use than any other encoder. The tiny sensor fits into very tight spaces, has broad alignment tolerances for fast and easy setup and works in both linear and rotary applications.
The entire Mercury 1500S encoder is EMI shielded for use in the toughest environments. With standard digital A-quad-B output, select the Mercury 1500 encoder with the resolution required by your application.
Mercury Series – M1500H
Specifications |
|
|---|---|
| Grating Period: | 20 um |
| Resolution (linear): | 0.50 um |
| Linear Accuracy (total): | 1 um |
| Max Speed (linear): | 7200 mm/sec |
Features
- Small sensor with ultra-low Z height; flush screw mounting
- Sensor is 8.4mm (H) x 12.7mm (W) x 20.6mm (L) and weighs 1.6g • Available with 15 pin standard D connector or micro-connector
- A-quad-B output and Index window
- Factoryset interpolationx4,x8,x20,x40forresolutions of5μm to 0.50μm (linear); 6,600
- CPR to 655,000 CPR (rotary)
- Entire system is EMI shielded
- Bi-directional index signal
- Index mark at the center or end of the glass scale (linear)
- Alignment Tool enables fast set up (see pg 2)
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Celera Motion Page to edit and add data
Frequently Asked Questions
Yes, the entire Mercury 1500S encoder is EMI shielded for use in the toughest environments.
The Mercury 1500 kit encoders are available in two styles: M1500S and M1500H.
The accuracy of the Mercury 1500 encoder is up to ± 1μm for linear and up to ± 2.1 arc-sec for rotary.
M1500S has a 15 pin standard D-sub connector, while M1500H has an RS-422 compatible 5x2 micro-connector for tight spaces.
The Mercury 1500 encoder has a factory set resolution of x4, x8, x20, or x40 for linear resolutions of 5μm to 0.50μm and rotary resolutions of 6,600 CPR to 655,000 CPR.