No parameters available.

Dispersive Virtual Reference Analyser
Inometrix Inc
The Dispersive Virtual ReferenceTM Analyser, based on our patented Virtual ReferenceTM Interferometer Technology, characterizes chromatic dispersion of short length optical components. This elegant new solution for the high precision characterization of optical channels works with third party tunable laser systems (Agilent/Keysight ...
Data Sheet
Virtual Reference Analyser
Inometrix Inc
The Virtual Reference™ Analyser is the next generation of chromatic dispersion measurement instruments based on our patented Virtual Reference™ Interferometer Technology. This elegant new solution for the high precision characterization of optical channels works with third party tunable laser systems (Agilent/Keysight ...
Data Sheet
PSM
Optical Perspectives Group, LLC
The PSM is the \"Swiss Army Knife\" of optical metrology and alignment instruments. Locates centers of curvature of lenses and mirrors to measure radii and focal lengths. Works as an autocollimator when the objective is removed to measure prism angles and wedges. Because of the small aperture size the PSM is particularly useful for ...
Data Sheet
TrueSurf
TrueGage
Most surface texture gages produced today work quite well, however, many lack the graphics or all of the computing power that you truly need. TrueSurf can make any gage capable of computing all of the latest ASME and ISO parameters. Enhance the capabilities of your low end instruments with TrueSurf software to visualize the profile ...
Data Sheet
TrueMap v5
TrueGage
A wide variety of instruments are now available for 3D surface measurements. A partial list of these instruments includes stylus profilometers, optical profilometers, scanning probe microscopes (SPMs), laser confocal microscopes, and laser scanning sensors. The best instrument to use quite often depends on the type of surface that is ...
Data Sheet
TrueMap v6 Beta
TrueGage
A wide variety of instruments are now available for 3D surface measurements. A partial list of these instruments includes stylus profilometers, optical profilometers, scanning probe microscopes (SPMs), laser confocal microscopes, and laser scanning sensors. The best instrument to use quite often depends on the type of surface that is ...
Data Sheet
highly precise and easy to use system for measuring the diameters of optical elements in both, production and quality inspection environments  designed for long term reliability and cost effective operation
  • Diameter Measurement: 8mm to 140mm 
Data Sheet
precise and easy to operate measurement system for determining centering errors on lens elements in production, quality inspection or metrology lab environments
Data Sheet
Transmission Spheres
XONOX Technology GmbH
5.2\" FIZEAU TRANSMISSION SPHERES FOR USING ON 4“ INTERFEROMETERS - PROVIDING EXTENDED MEASURING RANGE Available Sizes: f / 0.7 f / 0.8 f / 1.1 f / 1.6 f / 2.5 f / 4.2 f / 6.4 f / 9.2 f / 5.9D flat
Data Sheet
heliCam C3 - Fast Lock-in Camera
Heliotis AG
The lock-in camera was originally developed for low coherence interferometry, but the heliSens™ S3.1 sensor and the camera board have found new life with a variety of applications other than OCT, for example, pump-probe spectroscopy. For ease of integration, the Heliotis\' core technology is now available as a rigid camera, capable ...
Data Sheet
BARE FIBER CHUCK BFC-004
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet
BARE FIBER CHUCK BFC-007
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet
BARE FIBER CHUCK BFC-006
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet
BARE FIBER CHUCK BFC-005
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet
BARE FIBER CHUCK BFC-003
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet
BARE FIBER CHUCK BFC-002
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet
BARE FIBER CHUCK BFC-001
Promet Optics
The BFC™ facilitates endface geometry measurement of cleaved and polished bare optical fiber. Machined aluminum and steel constructions utilize an easy-to-load clam shell design and V-mount groove to prevent damage to fibers during loading. An optional Loading Station* can also be used to assist with sample preparation and alignment. ...
Data Sheet