All Categories

FILTER PRODUCTS

  1. Home
  2. Lasers
  3. Laser Components
  4. Ceramic and Glass Components
  5. Zerodur

Zerodur Ceramic and Glass Components

Precision Laser Flow Tubes & Reflectors for Water-Cooled Lasers | Ard Optics
ARD-OPTICS
Add to watch list
Precision Laser Flow Tubes & Reflectors for Water-Cooled Lasers | Ard Optics
Elevate your laser's performance with ARD Optics’ Laser Flow Tubes and Reflectors. Specifically designed for water-cooled lamp-pumped lasers, our laser flow tubes protect the laser elements from undesired UV radiation, absorbing it to enhance the efficiency of your laser system. Manufactured from materials like Pyrex Glass, ...

Specifications
Material: Fused Silica, UV Fused Silica, BK7, Sapphire, Zerodur, Doped Glass
Type Of Ceramic: Other
Component Type: Reflectors, Rods, Tubes, Flowtubes, Reflectors, Specular Reflectors, Lightguides
Holes Diameter Range: From 2mm to 40mm with tolerances of +/-0.05 to 0.1mm
Length Range: From 10mm to 150mm with tolerances of +/-0.05 to 0.1mm
...
Data Sheet
High Power Laser Optics
PreciSe Hyper iMage Optics (Suzhou) Co.,Ltd
Add to watch list
High Power Laser Optics
Laser Optics, a substrate is developed fitting for the laser system. Due to the complicated system design, most of the time, many laser optical parts used together in one system, they are applied with high damage threshold optical coating to make the system functioning in a proper way. PHYO OPTICS provide laser optical parts in small ...

Specifications
Material: Zerodur, UV Fused Silica, Fused Silica, Other
Type Of Ceramic: Other
Component Type: Reflectors, Lightguides, Reflectors, Substrates, Tubes, Rods
Damage Threshold: Upon requested
Coating: HR, AR, HT
...
Data Sheet
Optical Super Polishing
PreciSe Hyper iMage Optics (Suzhou) Co.,Ltd
Add to watch list
Optical Super Polishing
Super Polishing products including the finished substrate and the mirror coatings.OEM design for production acceptable. Main Characters as follows:1, Material : Ultra Low Expansion, Inclusion high grade2, Surface Roughness (RMS) : 1-5 Angstrom3, Flatness : L/10 to L/204, Surface quality: 10-5 Scratches and digs

Specifications
Material: Fused Silica, UV Fused Silica, BK7, Zerodur
Type Of Ceramic: Other
Component Type: Lightguides
Roughness: 0.2nm (2 angstrom )
Flatness: L/10 - L/20
...
Data Sheet
Flowtubes & Filter Flowtubes for Lamp Pumped Laser Heads
LT-PYRKAL CJSC
Add to watch list
Flowtubes & Filter Flowtubes for Lamp Pumped Laser Heads
Flowtubes and Filter Flowtubes are machined out of a block or a rod of carefully selected materials, un-doped or doped with the appropriate rare earth or metal ions, depending on the filtering results we are looking after and on the state of the available doping/filtering optical materials technology.From its skilled alignment during ...

Specifications
Material: Fused Silica, UV Fused Silica, Zerodur, Duran, Doped Glass
Type Of Ceramic: Not Applicable
Component Type: Flowtubes
Max Length: 120 mm
Inside Hole Diameter: 6 - 20 mm
...
Data Sheet
On FindLight marketplace you will find 4 different Zerodur Ceramic and Glass Components from suppliers around the world. With just a few clicks you can compare different Zerodur Ceramic and Glass Components and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.