EMIRS50 TO46 with Reflector 7
Description
Axetris infrared (IR) sources are micro-machined,
electrically modulated thermal infrared emitters
featuring true blackbody radiation characteristics, low
power consumption, high emissivity and a long lifetime.
The appropriate design is based on a resistive heating
element deposited onto a thin dielectric membrane
which is suspended on a micro-machined silicon
structure.
EMIRS50 TO46 with Reflector 7
Specifications |
|
|---|---|
| Wavelength: | 8000 nm |
| Output Power (typical): | 0.77 mW |
| Emission Angle: | N/A degree |
Features
Key features for all Axetris infrared sources
- True black body radiation (2 to 14 μm)
- High emissivity
- Fast electrical modulation (no chopper wheel required)
- High modulation depth
- Energy efficient (excellent optical output)
- Superior lifetime
Special EMIRS50 Features (compared to EMIRS200)
- 3x smaller
- 2x more efficient
- 3x faster
- Excellent signal-to-noise ratio (due to higher frequency)
Applications
- Measurement principles: non-dispersive infrared
spectroscopy (NDIR), photoacoustic infrared
spectroscopy (PAS) or attenuated-total-reflectance
FTIR spectroscopy (ATR) - Target gases: CO, CO2, VOC, NOX, NH3, SOX, SF6,
hydrocarbons, humidity, anesthetic agents,
refrigerants, breath alcohols - Medical: Capnography, anesthesia gas monitoring,
respiration monitoring, pulmonary diagnostics, blood
gas analysis - Industrial Applications: Combustible and toxic gas
detection, refrigerant monitoring, flame detection,
fruit ripening monitoring, SF6 monitoring, semiconductor
fabrication - Automotive: CO2 automotive refrigerant monitoring,
alcohol detection & interlock, cabin air quality - Environmental: Heating, ventilating and air
conditioning (HVAC), indoor air quality and VOC
monitoring, air quality monitoring
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Switzerland
-
Sold by:
-
On FindLight:
External Vendor
Claim Axetris AG A Leister Group Page to edit and add data
Frequently Asked Questions
The absolute maximum ratings of the EMIRS50 include a heater membrane temperature of 500°C, an optical output power (hemispherical spectral) of 4.1 mW, and optical output power between 4 μm and 13 μm at different temperature ranges. It also has an electrical cold resistance of 22 to... (truncated).
The applications of EMIRS50 include non-dispersive infrared spectroscopy (NDIR), photoacoustic infrared spectroscopy (PAS), or attenuated-total-reflectance FTIR spectroscopy (ATR) for measuring gases such as CO, CO2, VOC, NOX, NH3, SOX, SF6, hydrocarbons, humidity, anesthetic agents, refrigerants, and breath alcohols. It can also be used in medical applications such as capnography, anesthesia gas monitoring, respiration monitoring, pulmonary diagnostics, and blood gas analysis, as well as in industrial applications such as combustible and toxic gas detection, refrigerant monitoring, flame detection, fruit ripening monitoring, SF6 monitoring, and semiconductor fabrication. It can also be used in automotive applications such as CO2 automotive refrigerant monitoring, alcohol detection & interlock, and cabin air quality, as well as in environmental applications such as heating, ventilating and air conditioning (HVAC), indoor air quality and VOC monitoring, and air quality monitoring.
The key features of Axetris infrared sources are true black body radiation, high emissivity, fast electrical modulation, high modulation depth, energy efficiency, and superior lifetime.
The special features of EMIRS50 compared to EMIRS200 are that it is 3x smaller, 2x more efficient, 3x faster, and has an excellent signal-to-noise ratio due to higher frequency.
The EMIRS50 TO46 with Reflector 7 is a micro-machined, electrically modulated thermal infrared emitter with true blackbody radiation characteristics, low power consumption, high emissivity, and a long lifetime.