EMIRS50 AT06V Chip on TO Header
Description
Axetris infrared (IR) sources are micro-machined,
electrically modulated thermal infrared emitters
featuring true blackbody radiation characteristics, low
power consumption, high emissivity and a long lifetime.
The patented design is based on a resistive heating
element deposited onto a thin dielectric membrane
which is suspended on a micro-machined silicon
structure.
EMIRS50 AT06V Chip on TO Header
Specifications |
|
|---|---|
| Wavelength: | 8000 nm |
| Output Power (typical): | 1.1 mW |
| Emission Angle: | N/A degree |
Features
- Large modulation depth at high frequencies
- Broad band emission
- Low power consumption
- Long lifetime
- True black body radiation (2 to 14 μm)
- Very fast electrical modulation (no chopper
wheel needed) - Suitable for portable and very small applications
- Rugged MEMS design
Applications
- Measurement principles: non-dispersive infrared
spectroscopy (NDIR), photoacoustic infrared
spectroscopy (PAS) or attenuated-total-reflectance
FTIR spectroscopy (ATR) - Target gases: CO, CO2, VOC, NOX, NH3, SOX, SF6,
hydrocarbons, humidity, anesthetic agents,
refrigerants, breath alcohols - Medical: Capnography, anesthesia gas monitoring,
respiration monitoring, pulmonary diagnostics, blood
gas analysis - Industrial Applications: Combustible and toxic gas
detection, refrigerant monitoring, flame detection,
fruit ripening monitoring, SF6 monitoring, semiconductor
fabrication - Automotive: CO2 automotive refrigerant monitoring,
alcohol detection & interlock, cabin air quality - Environmental: Heating, ventilating and air
conditioning (HVAC), indoor air quality and VOC
monitoring, air quality monitoring
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Switzerland
-
Sold by:
-
On FindLight:
External Vendor
Claim Axetris AG A Leister Group Page to edit and add data
Frequently Asked Questions
The EMIRS50 AT06V chip on TO header can be used in various applications such as non-dispersive infrared spectroscopy (NDIR), photoacoustic infrared spectroscopy (PAS) or attenuated-total-reflectance FTIR spectroscopy (ATR), medical applications such as capnography, anesthesia gas monitoring, respiration monitoring, pulmonary diagnostics, blood gas analysis, industrial applications such as combustible and toxic gas detection, refrigerant monitoring, flame detection, fruit ripening monitoring, SF6 monitoring, semiconductor fabrication, automotive applications such as CO2 automotive refrigerant monitoring, alcohol detection & interlock, cabin air quality, and environmental applications such as heating, ventilating and air conditioning (HVAC), indoor air quality and VOC monitoring, air quality monitoring.
The EMIRS50 AT06V chip on TO header has large modulation depth at high frequencies, broad band emission, low power consumption, long lifetime, true black body radiation (2 to 14 μm), very fast electrical modulation (no chopper wheel needed), suitable for portable and very small applications, and rugged MEMS design.
The electrical resistance of the EMIRS50 AT06V chip on TO header varies between 22 to 36 Ω at room temperature and increases to a higher value at the operating temperature of 500°C.
The EMIRS50 AT06V is a thermal MEMS based infrared source for direct electrical fast modulation. It is a micro-machined, electrically modulated thermal infrared emitter featuring true blackbody radiation characteristics, low power consumption, high emissivity and a long lifetime.
The optical output power of the EMIRS50 AT06V chip on TO header varies between 0.55 mW to 5.8 mW depending on the wavelength range.