EMIRS200 TO39 with Reflector 2
Description
Axetris infrared (IR) sources are micro-machined, electrically modulated thermal infrared emitters featuring true blackbody radiation characteristics, low power consumption, high emissivity and a long lifetime.
The appropriate design is based on a resistive heating element deposited onto a thin dielectric membrane which is suspended on a micro-machined silicon structure.
EMIRS200 TO39 with Reflector 2
Specifications |
|
|---|---|
| Wavelength: | 8500 nm |
| Output Power (typical): | 3.3 mW |
| Emission Angle: | N/A degree |
Features
- True black body radiation (2 to 14 μm)
- High emissivity
- Fast electrical modulation (no chopper wheel needed)
- High modulation depth
- High electrical input to optical output efficiency
- Low power consumption
- Long lifetime
- Rugged MEMS design (passed the requirements of IEC 60721-3-7 Class 7M3, except for BaF2 and CaF2 windows)
Applications
- Measurement principles: non-dispersive infrared spectroscopy (NDIR), photoacoustic infrared spectroscopy (PAS) or attenuated-total-reflectance FTIR spectroscopy (ATR)
- Target gases: CO, CO2, VOC, NOX, NH3, SOX, SF6, hydrocarbons, humidity, anesthetic agents, refrigerants, breath alcohols
- Medical: Capnography, anesthesia gas monitoring, respiration monitoring, pulmonary diagnostics, blood gas analysis
- Industrial Applications: Combustible and toxic gas detection, refrigerant monitoring, flame detection, fruit ripening monitoring, SF6 monitoring, semi-conductor fabrication
- Automotive: CO2 automotive refrigerant monitoring, alcohol detection & interlock, cabin air quality
- Environmental: Heating, ventilating and air conditioning (HVAC), indoor air quality and VOC monitoring, air quality monitoring
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Switzerland
-
Sold by:
-
On FindLight:
External Vendor
Claim Axetris AG A Leister Group Page to edit and add data
Frequently Asked Questions
The EMIRS200 TO39 with Reflector 2 is used in various applications such as non-dispersive infrared spectroscopy (NDIR), photoacoustic infrared spectroscopy (PAS), attenuated-total-reflectance FTIR spectroscopy (ATR), medical applications, industrial applications, automotive applications, and environmental applications.
The EMIRS200 TO39 with Reflector 2 features true black body radiation (2 to 14 μm), high emissivity, fast electrical modulation (no chopper wheel needed), high modulation depth, high electrical input to optical output efficiency, low power consumption, and a rugged MEMS design.
The EMIRS200 TO39 with Reflector 2 is a thermal infrared source that emits true blackbody radiation characteristics, featuring low power consumption, high emissivity, and a long lifetime.
The maximum heater membrane temperature of the EMIRS200 TO39 with Reflector 2 is 500°C.
The maximum optical output power of the EMIRS200 TO39 with Reflector 2 is 30 mW for hemispherical spectral, and between 4 μm and 5 μm is 4.0 mW, between 6 μm and 8 μm is 5.4 mW, and between 8 μm and 10 μm is truncated.