All Categories
Optical Networking

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Fiber Optics
  3. Optical Networking

Page 8 - Optical Networking Equipment

High-sensitivity 10Gbps APD TO
Wooriro
Add to watch list
High-sensitivity 10Gbps APD TO
Active Optical Communication - Photodiode Module. High-sensitivity 10Gbps APD TO.  
Data Sheet
10Gbps APD TO With Burst-Mode TIA
Wooriro
Add to watch list
10Gbps APD TO With Burst-Mode TIA
Active Optical Communication - Photodiode Module. 10Gbps APD TO with Burst-mode TIA.  
Data Sheet
High-Sensitive 2.5Gbps PIN-PD TIA TO
Wooriro
Add to watch list
High-Sensitive 2.5Gbps PIN-PD TIA TO
The High-Sensitive 2.5Gbps PIN TIA TO is a TO-46 packaged InGaAs PIN PD device with a high-sensitive TIA for use in fiber optics communication networks applications up to 2.5Gbps. The PIN PD/TIA is mounted on a TO-46 header and hermetic sealed with a lens cap. The High-Sensitive 2.5Gbps PIN TIA TO has wide input dynamic range that ...
Data Sheet
2.5Gbps APD ROSA
Wooriro
Add to watch list
2.5Gbps APD ROSA
Active Optical Communication - Photodiode Module. 2.5Gbps APD ROSA.  
Data Sheet
2.5Gb/s APD TIA Pigtailed ROSA
Wooriro
Add to watch list
2.5Gb/s APD TIA Pigtailed ROSA
Active Optical Communication - Photodiode Module. 2.5Gb/s APD TIA Pigtailed ROSA.  
Data Sheet
4CH CWDM Demux250 Chip Quartz Substrate
Wooriro
Add to watch list
4CH CWDM Demux250 Chip Quartz Substrate
Passive Optical Communication - CWDM Chip & DWDM Chip. 4CH CWDM Demux250 Chip (Quartz Substrate).   

Specifications
Operating Wavelength: 1331 nm
Operating Bandwidth: 12 nm
Isolation (min): 1 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
4CH CWDM Mux500 Chip U-Type
Wooriro
Add to watch list
4CH CWDM Mux500 Chip U-Type
Passive Optical Communication - CWDM Chip & DWDM Chip. 4CH CWDM Mux500 Chip (U-Type).  

Specifications
Operating Wavelength: 1331 nm
Operating Bandwidth: 11 nm
Isolation (min): 3 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
4CH CWDM Mux250 Chip
Wooriro
Add to watch list
4CH CWDM Mux250 Chip
Passive Optical Communication - CWDM Chip & DWDM Chip. Wooriro 4CH CWDM Mux250 Chip.  

Specifications
Operating Wavelength: 1331 nm
Operating Bandwidth: 10 nm
Isolation (min): 3 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
ACS 42 Metallic Aerial Self-Supporting Cable
AFL Sub of Fujikura Ltd
Add to watch list
ACS 42 Metallic Aerial Self-Supporting Cable
Metallic Aerial Self-Supporting (MASS) Cable is an alternative solution used for installing optical cable on medium and high voltage power lines. It is typically used when existing phase or ground wire replacement is not possible or economical. MASS cable is a compact, light-weight solution with no electrical function, designed to ...
Data Sheet
ACS 28 Metallic Aerial Self-Supporting Cable
AFL Sub of Fujikura Ltd
Add to watch list
ACS 28 Metallic Aerial Self-Supporting Cable
Metallic Aerial Self-Supporting (MASS) Cable is an alternative solution used for installing optical cable on medium and high voltage power lines. It is typically used when existing phase or ground wire replacement is not possible or economical. MASS cable is a compact, light-weight solution with no electrical function, designed to ...
Data Sheet
AC-102/691 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-102/691 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 72
Total Conductor Area: 158.96 mm2
Overall Diameter: 17.5 mm
Data Sheet
AC-88/659 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-88/659 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 72
Total Conductor Area: 143.98 mm2
Overall Diameter: 16.7 mm
Data Sheet
AC-129/724 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-129/724 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 48
Total Conductor Area: 185.57 mm2
Overall Diameter: 18.4 mm
Data Sheet
AC-86/646 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-86/646 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 48
Total Conductor Area: 142.43 mm2
Overall Diameter: 16.4 mm
Data Sheet
AC-86/607 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-86/607 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 36
Total Conductor Area: 129.4 mm2
Overall Diameter: 15.4 mm
Data Sheet
AC-71/571 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-71/571 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 36
Total Conductor Area: 113.39 mm2
Overall Diameter: 14.5 mm
Data Sheet
AC-74/552 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-74/552 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 24
Total Conductor Area: 107.51 mm2
Overall Diameter: 14 mm
Data Sheet
AC-64/528 AlumaCore OPGW
AFL Sub of Fujikura Ltd
Add to watch list
AC-64/528 AlumaCore OPGW
AFL AlumaCore OPGW (Optical Ground Wire) is preferred for its central aluminum pipe and color-coded fiber optic buffer tubes which simplify the splicing process while providing optimum fiber protection as well as long term product reliability. Optical Ground Wire (OPGW) is a dual functioning cable.  It is designed to replace ...

Specifications
Fiber Count (max): 24
Total Conductor Area: 97.43 mm2
Overall Diameter: 13.4 mm
Data Sheet
Wavelength Division Multiplexer 100-140 µm GI Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 100-140 µm GI Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing enclosures.

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: Yes
Data Sheet
Wavelength Division Multiplexer 62.5-125 µm GI Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 62.5-125 µm GI Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing ...

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
Wavelength Division Multiplexer 50-125 µm GI Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 50-125 µm GI Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing enclosures.

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
Wavelength Division Multiplexer 900 µm SM Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 900 µm SM Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing enclosures.

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
Wavelength Division Multiplexer 250 µm SM Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 250 µm SM Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing enclosures.

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
Wavelength Division Multiplexer 125 µm SM Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 125 µm SM Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing enclosures.

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet
Wavelength Division Multiplexer 9 µm SM Fibers
Xenlux
Add to watch list
Wavelength Division Multiplexer 9 µm SM Fibers
These low-loss bidirectional fiber-optic wavelength division multiplexer (WDM) are based on graded-index (GRIN) lenses. Dichroic filters are used to combine or separate different wavelength. They exhibit low sensitivity to changes in modal distributions and are available in housings which can be mounted in standard splicing ...

Specifications
Operating Wavelength: 1360 nm
Operating Bandwidth: -- nm
Isolation (min): 21 dB
Max Power Handling: -- W
Polarization Maintaining: No
Data Sheet