Description

Silicon Carbide Semiconductors for High‑Power, High‑Temperature & Defense Applications

CoolCAD Electronics develops and manufactures advanced silicon carbide (SiC) semiconductor devices and integrated circuits engineered for demanding high‑power, high‑temperature, and mission‑critical environments. Emerging from a strong university research background and backed by extensive peer‑reviewed publications and federal R&D programs, the company focuses on bringing wide‑bandgap SiC technology out of the laboratory and into rugged, application‑ready components. This makes CoolCAD a specialized resource for defense, aerospace, industrial power electronics, and UV photonics markets that require reliable operation where conventional silicon devices fall short.

Unlike standard silicon suppliers that primarily provide catalog parts, CoolCAD maintains in‑house capabilities spanning device design, wafer‑level fabrication, and module‑level assembly specifically optimized for SiC. The product line includes SiC power MOSFETs for high‑efficiency switching, Schottky diodes for fast and low‑loss rectification, high‑temperature CMOS ICs for embedded control and sensing in harsh environments, and deep‑UV photodiodes and avalanche photodiodes for ultraviolet detection and monitoring. By vertically integrating design, processing, and packaging under one roof, the company can tightly control material quality, device architecture, and thermal management to deliver consistent performance at elevated voltages, temperatures, and switching speeds.

At the core of CoolCAD’s value proposition is the fundamental advantage of silicon carbide as a wide‑bandgap semiconductor material. Compared with silicon, 4H‑SiC exhibits a bandgap nearly three times wider, a critical electric field roughly an order of magnitude higher, and significantly better thermal conductivity. These intrinsic properties allow SiC devices to handle higher blocking voltages, operate at much higher junction temperatures, and switch faster with lower losses. As a result, CoolCAD’s SiC MOSFETs and diodes can support compact, high‑power density converter designs, reduce the size and weight of cooling systems, and enable more efficient operation in applications such as aerospace power distribution, electric and hybrid vehicle powertrains, high‑temperature downhole electronics, and high‑reliability defense platforms.

Beyond discrete power devices, CoolCAD focuses on high‑temperature integrated circuits and UV‑sensitive detectors where SiC’s robustness is particularly valuable. High‑temperature CMOS ICs fabricated on SiC or designed to co‑pack with SiC power stages can operate in environments that exceed the practical limits of traditional silicon electronics, supporting temperatures that would normally require remote mounting or heavy thermal protection. Deep‑UV photodiodes and avalanche photodiodes leverage SiC’s inherent solar blindness and radiation hardness to provide stable detection in UV curing, combustion monitoring, flame detection, biomedical instrumentation, and space‑based sensing where low dark current and long‑term reliability are critical.

For customers with specialized requirements, CoolCAD offers custom device and module development that bridges the gap between research innovation and deployable hardware. The company’s engineering team uses advanced mixed‑signal and device modeling tools, including its proprietary CoolSPICE simulation platform, to co‑optimize structures, layouts, and packaging for specific voltage, current, frequency, and thermal constraints. Micro‑fabrication expertise is complemented by capabilities for cryogenic characterization and radiation testing, enabling design and validation of components aimed at space, nuclear, and other extreme environments. This combination of simulation, fabrication, and testing lets system designers de‑risk new architectures and shorten the cycle from concept to qualified product.

CoolCAD’s experience across government and commercial projects, including numerous Small Business Innovation Research (SBIR) awards and ISO 9001:2015–certified quality processes, positions the company as a technically deep yet agile supplier in the global SiC ecosystem. While many high‑volume manufacturers focus on mainstream automotive and industrial power markets, CoolCAD concentrates on advanced, high‑performance segments that demand customized electrical characteristics, unconventional operating ranges, and carefully documented reliability under stress. This makes its silicon carbide semiconductor portfolio an attractive choice for organizations seeking differentiated performance, tailored device solutions, and long‑term support for critical high‑power, high‑temperature, and defense applications.

CoolCAD SiC Semiconductors Power MOSFETs Schottky Diodes UV Photodiodes

Specifications

Type Of Service: Custom Manufacturing, Engineering design, Industrial design, Manufacturing design, Other
Max Junction Temperature (SiC 4H): >500 °C
Phase II SBIR Completed: 8+
Phase I SBIR Awards: 21+
Publications: 200+ peer-reviewed
Location: Greenbelt, MD
Year Founded: 2008
CMMC / NIST: NIST-800-171 Self-Assessment
RoHS: Compliant
ISO Certification: ISO 9001:2015
Blocking Voltage (SiC Devices): >900 V
Bandgap (Silicon): 1.1 eV
Max Junction Temperature (Silicon): ~200 °C
Electron Saturation Velocity (SiC 4H): 2×10^7 cm/s
Electron Saturation Velocity (Silicon): 1×10^7 cm/s
Thermal Conductivity (SiC 4H): 4.9 W/cm·K
Thermal Conductivity (Silicon): 1.5 W/cm·K
Critical Field (SiC 4H): 3.0 MV/cm
Critical Field (Silicon): 0.3 MV/cm
Bandgap (SiC 4H): 3.3 eV

Got questions about specs? Use the inquiry form to ask.

Document icon Download Data Sheet Download icon

Features

  • End-to-End Silicon Carbide (SiC) Capability – In-house design, fabrication, packaging, and testing of wide-bandgap SiC devices and integrated circuits, eliminating reliance on third-party foundries and ensuring full process control from wafer to finished module.
  • High-Power, High-Voltage SiC MOSFETs & Diodes – Portfolio of SiC MOSFETs and Schottky barrier diodes optimized for >900 V blocking voltage, ultra-low conduction losses, and fast switching, ideal for compact, high-efficiency power converters and pulsed power systems.
  • High-Temperature Operation Beyond Silicon Limits – Devices and ICs engineered to operate at sustained junction temperatures of >400°C (with material limits above 500°C), dramatically exceeding the ~200°C ceiling of conventional silicon, minimizing or eliminating active cooling in harsh environments.
  • Radiation-Hardened & Cryogenic-Ready Solutions – Proven SiC device architectures, process flows, and test infrastructure for radiation-tolerant and cryogenic operation, supporting space, nuclear, and deep-cryogenic electronics where standard silicon rapidly degrades.
  • High-Temperature CMOS & Mixed-Signal ICs – Custom high-temperature SiC CMOS integrated circuits, including analog, digital, and mixed-signal building blocks, for reliable operation in downhole tools, aerospace engines, industrial power systems, and defense electronics.
  • Deep-UV Photodiodes & Avalanche Photodiodes (APDs) – SiC deep-ultraviolet photodiodes and APDs with intrinsic solar blindness, low dark current, and high responsivity, ideal for UV flame detection, missile warning, LIDAR, spectroscopy, and environmental monitoring.
  • Power Converter & Module Platforms – Application-ready SiC-based power converter modules and reference designs that leverage high switching speed, low switching losses, and high thermal conductivity for compact, high-density power electronics.
  • Custom Device & Power Module Design Services – Tailored SiC device geometries, die layouts, and multi-chip power modules co-designed with customers to meet specific voltage, current, switching frequency, and thermal requirements in demanding applications.
  • Advanced Micro-Fabrication Capabilities – In-house micro-fabrication for prototyping and low-to-medium volume SiC device production, including specialized structures for sensors, power devices, and optoelectronics not available from standard silicon fabs.
  • Comprehensive Test & Qualification (Radiation, Cryogenic, HT) – Dedicated facilities and methodologies for radiation testing, cryogenic testing, and high-temperature burn-in, enabling thorough qualification of parts for space, defense, and extreme-environment missions.
  • CoolSPICE Physics-Based Simulation – Proprietary CoolSPICE circuit and device simulation platform, calibrated to SiC material properties and internal process data, providing highly accurate modeling of high-power, high-temperature, and high-frequency SiC circuits.
  • ISO 9001:2015 Certified Quality System – Formalized quality management system with ISO 9001:2015 certification, ensuring traceable processes, consistent device performance, and reliable delivery for industrial, aerospace, and defense customers.
  • Cyber & Regulatory Compliance – CMMC / NIST 800-171 self-assessment and RoHS-compliant processes support secure handling of sensitive defense-related data and adherence to environmental directives for global deployments.
  • Defense, Aerospace & Power Electronics Focus – Product and process roadmaps aligned with defense, aerospace, and high-reliability power electronics, addressing needs in propulsion, radar, avionics, hypersonics, satellites, electric naval systems, and advanced energy conversion.
  • Strong R&D Track Record & Technical Depth – More than 200 peer-reviewed publications, 21+ Phase I and 8+ Phase II SBIRs awarded, reflecting deep expertise in SiC materials, device physics, and circuit design and enabling rapid translation of research into fielded hardware.
  • University Spinout with Ph.D.-Level Expertise – Originating from the University of Maryland’s Electronics Modeling and Mixed Signal Group, the team combines academic-level research capability with product-focused engineering for cutting-edge, application-ready SiC solutions.
  • Wide-Bandgap Material Advantages Over Sil

Applications

  • High-Efficiency Power Conversion Systems
    AC‑DC and DC‑DC converters, inverters, and rectifiers requiring low switching losses and high power density for industrial, medical, and scientific equipment.
  • Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV) Powertrains
    On‑board chargers, DC‑DC converters, traction inverters, auxiliary power modules, and fast‑charging infrastructure using SiC MOSFETs and Schottky diodes for higher efficiency and reduced cooling requirements.
  • Aerospace Power Electronics
    More‑electric aircraft power distribution units, motor drives, actuators, and avionics power supplies operating at elevated temperatures and under stringent size, weight, and power (SWaP) constraints.
  • Defense and Missile Systems
    High‑temperature, radiation‑tolerant power stages, motor drives, and control electronics for missiles, guided munitions, launch vehicles, radar and electronic warfare (EW) power conditioning.
  • Spacecraft and Satellite Power Management
    Radiation‑exposed DC‑DC converters, solar array regulators, battery charge controllers, thruster drive electronics, and avionics modules benefiting from SiC’s wide bandgap and radiation hardness.
  • High-Temperature Downhole and Geothermal Electronics
    Logging‑while‑drilling (LWD) and measurement‑while‑drilling (MWD) tools, geothermal well instrumentation, and completion monitoring systems where ambient and junction temperatures routinely exceed 200°C.
  • Industrial Motor Drives and Servo Systems
    Variable frequency drives (VFDs), servo amplifiers, and high‑performance motor controllers for robotics, machine tools, compressors, pumps, and conveyor systems requiring higher efficiency and reduced footprint.
  • Renewable Energy Inverters
    Solar PV inverters, wind turbine converters, energy storage inverters, and microgrid interfaces that leverage SiC devices for higher switching frequencies, improved efficiency, and smaller magnetics.
  • High-Voltage DC (HVDC) and Smart Grid Equipment
    Solid‑state transformers, grid‑tie inverters, FACTS devices, solid‑state breakers, and power conditioning systems demanding high blocking voltages and fast switching performance.
  • Rail, Marine, and Heavy Transportation
    Traction inverters, auxiliary converters, and power supplies for locomotives, light rail, ships, and off‑highway vehicles where reliability and efficiency at high power levels are critical.
  • Uninterruptible Power Supplies (UPS) and Data Center Power
    High‑efficiency UPS systems, server power supplies, and power distribution units (PDUs) targeting reduced losses, improved thermal margins, and higher power density.
  • Extreme-Environment Control Electronics
    High‑temperature CMOS ICs for sensing, signal conditioning, control, and data acquisition in turbines, engines, industrial furnaces, and process plants.
  • Radiation-Hardened and Cryogenic Electronics
    Control and readout circuitry designed for space, high‑energy physics experiments, nuclear facilities, and cryogenic environments, supported by radiation and cryo testing services.
  • Ultraviolet (UV) and Deep-UV Detection
    UV and deep‑UV photodiodes and avalanche photodiodes (APDs) for flame detection, corona discharge monitoring, UV spectroscopy, environmental monitoring, sterilization process control, and semiconductor lithography tools.
  • Industrial and Scientific Lasers & Photonics
    UV beam monitoring, power metering, alignment, and feedback control in laser processing systems, medical lasers, and analytical instruments.
  • Power Modules and Custom Integrated Power Stages
    Application‑specific SiC power modules for compact converter platforms, co‑packaged diodes/MOSFETs, and integrated gate‑driver solutions tailored to customer requirements.
  • More-Electric and Hybrid Aircraft Propulsion
    High‑temperature inverters, starter‑generator controllers, and power distribution electronics for emerging electric and hybrid‑electric propulsion architectures.
  • Industrial Test, Measurement, and Instrumentation
    Precision high‑voltage sources, pulse generators, high‑frequency power amplifiers, and rugged measurement systems that demand stable operation across wide temperature ranges.
  • Oil, Gas, and Petrochemical Monitoring Systems
    High‑reliability sensors, signal conditioning ICs, and power supplies in harsh, high‑temperature, and chemically aggressive environments.
  • Custom SiC Device, Module, and IC Development
    Co‑designed, application‑specific SiC MOSFETs, diodes, high‑temperature ICs, and pho

Frequently Asked Questions

What types of silicon carbide (SiC) semiconductor devices does CoolCAD Electronics provide?
CoolCAD Electronics designs and fabricates a wide range of wide‑bandgap SiC devices, including SiC power MOSFETs, SiC Schottky barrier diodes, high‑temperature CMOS integrated circuits, deep‑UV photodiodes, avalanche photodiodes, and power converter platforms. In addition to standard device types, the company offers custom device and module design, micro‑fabrication, and full device assembly tailored to specific power electronics, defense, aerospace, high‑temperature, and UV photonics applications.
What are the key advantages of silicon carbide (SiC) over silicon for high‑power and high‑temperature applications?
Silicon carbide (4H‑SiC) has a much wider bandgap (about 3.3 eV vs. 1.1 eV for silicon), a roughly 10× higher critical electric field, around 3× higher thermal conductivity, and about 2× higher electron saturation velocity compared with silicon. These material advantages allow SiC devices to support higher blocking voltages (>900 V), operate reliably at sustained junction temperatures well beyond 400 °C (compared with ~200 °C for Si), switch faster with lower switching losses, and dissipate heat more efficiently. The result is smaller, lighter, and more efficient power systems for demanding environments such as electric drives, aerospace power conversion, down‑hole tools, and radiation‑exposed systems.
Which industries and applications are CoolCAD SiC devices and ICs best suited for?
CoolCAD’s SiC devices and integrated circuits are optimized for high‑power, high‑temperature, and harsh‑environment applications across several sectors: power electronics (inverters, converters, motor drives, solid‑state breakers), defense and aerospace (avionics power, radar, directed energy, space power conditioning), high‑temperature industrial systems (down‑hole drilling tools, geothermal, automotive under‑hood electronics), and UV photonics (deep‑UV sensing, flame detection, solar‑blind UV imaging). Their wide‑bandgap SiC technology and high‑temperature CMOS ICs enable reliable operation where conventional silicon components cannot meet thermal, radiation, or power‑density requirements.
Does CoolCAD offer custom SiC device and module design, and what services are available?
Yes. Beyond standard device offerings, CoolCAD provides end‑to‑end custom services for SiC and related technologies. These services include custom power MOSFET, diode, and high‑temperature IC design; custom power module design and assembly; micro‑fabrication and prototype runs; as well as specialized testing such as cryogenic characterization and radiation qualification. The company also supports customers with device‑level and circuit‑level modeling using its in‑house CoolSPICE simulation platform, helping engineers co‑optimize device structures and power converter topologies for demanding defense, aerospace, and industrial projects.
How do CoolCAD SiC MOSFETs and Schottky diodes improve power converter efficiency and size?
SiC MOSFETs and Schottky diodes from CoolCAD leverage the high critical field, superior thermal conductivity, and fast carrier transport of SiC to achieve lower conduction and switching losses than comparable silicon IGBTs or MOSFET/diode solutions. This enables higher switching frequencies and higher junction temperatures without sacrificing reliability, allowing designers to shrink magnetics, filters, and cooling hardware. In practice, this translates to more compact, lighter, and more efficient DC‑DC converters, inverters, and power distribution units—particularly valuable in aerospace, defense, and mobile platforms where size, weight, and power (SWaP) are critical.
Are CoolCAD Electronics’ SiC products and services compliant with aerospace and defense quality standards?
CoolCAD Electronics operates under an ISO 9001:2015‑certified quality system and maintains CMMC / NIST‑800‑171 self‑assessment for handling controlled unclassified information, which is important for U.S. defense and aerospace programs. The company also offers radiation testing and qualification services for SiC devices and high‑temperature ICs, helping customers meet mission‑specific requirements for space and high‑reliability defense applications. Additionally, CoolCAD’s devices are RoHS compliant, supporting use in programs and platforms that require restriction of hazardous substances.
How can engineers evaluate or start a project with CoolCAD’s SiC technology?
Engineers typically begin by engaging CoolCAD through an application discussion and review of electrical, thermal, and environmental requirements. Based on these inputs, CoolCAD can recommend suitable SiC MOSFETs, Schottky diodes, high‑temperature ICs, or UV photodiodes from its portfolio, or propose a custom device or module design. The company supports feasibility studies, SBIR/STTR collaborations, and prototype builds, and can provide simulation support via its CoolSPICE platform. For inquiries or to start a project, customers can contact CoolCAD Electronics at info@coolcadelectronics.com or via the contact form on coolcadelectronics.com.

Got more questions? Use the inquiry form to ask the supplier directly.

Similar Products

Request Quote